Professional Documents
Culture Documents
Print Exit
NOTICE:
· When using a vise, place aluminum plates between the part and vise.
· When using a vise, do not overtighten it.
PROCEDURE
a.
Using a dial indicator, check the front propeller shaft assembly runout.
Maximum runout:
0.3 mm (0.0118 in.)
If the front propeller shaft assembly runout is more than the maximum, replace the front propeller shaft
assembly.
b.
Check the spider bearing axial play by turning the yoke while holding the front propeller shaft assembly
tightly.
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-…manual/repair/contents/RM100000000M5SS.html?PUB_TYPE=RM&MODE=1 Page 1 of 2
Print-Toyota Service Information 11/3/17, 8(04 pm
If the axial play is more than the maximum, replace the spider bearings.
https://toyotamanuals.com.au/docs/hilux-service-repair-manual-…anual/repair/contents/RM100000000M5SS.html?PUB_TYPE=RM&MODE=1 Page 2 of 2