Professional Documents
Culture Documents
Alcatel Lucent 7705 Sar Manual de Usuario
Alcatel Lucent 7705 Sar Manual de Usuario
S E R V I C E A G G R E G A T I O N R O U T E R | R E L E A S E 1 . 0
The Alcatel-Lucent 7705 Service Aggregation Router (SAR) delivers industry-leading IP/MPLS and pseudowire
capabilities in a compact platform that has the ability to groom and aggregate multiple media, service and
transport protocols onto a normalized, economical packet transport infrastructure.
The Alcatel-Lucent 7705 SAR is extrem Any Service, Any Port (ASAP) ports. On
ely well suited to the transport needs of the network uplink side, media connec
the evolving mobile radio access network tivity options are: Ethernet, Fast Ethernet
(RAN). The platform delivers strong (FE), Gigabit Ethernet (GE), or n xT1/E1
convergence capabilities in the mobile Multi-Link Point-to-Point Protocol
RAN with native service processing of (MLPPP). The platform can be option-
2G, 3G and 4G traffic. In addition, the ally configured with a redundant core
platform can provide a powerful solution control module and uplinks. The
for wireline aggregation and routing in Alcatel-Lucent 7705 SAR-8 has eight
carrier and enterprise applications. For slots; two are allocated for control
example, the Alcatel-Lucent 7705 SAR and switch modules (CSMs), with the
can be deployed in a T1/E1 private remaining six being available for user
line multiplexing environment. traffic adapter cards. The Alcatel-
Lucent 7705 SAR has a compact modular
The Alcatel-Lucent 7705 SAR owes architecture, constructed to allow
much of its development heritage flexible use of line adapter cards so
to the Alcatel-Lucent Service Router operators can optimize the configura-
(SR) product line. Sharing much of tion to meet the specific requirements
the market-leading feature set of that of a site.
product, the Alcatel-Lucent 7705 SAR
brings a powerful, service-oriented With the modular architecture comes
capability to the RAN, but in a form additional resilience and flexibility.
factor and at a price point that are The solution can optionally support
particularly appropriate for cell sites 1+1 fully redundant CSMs. Each adapter
and hub locations. With end-to-end card has dual paths to the active and
service management under the standby CSMs. Each of the six adapter
Alcatel-Lucent 5620 management card slots can be used for any adapter
portfolio, the Alcatel-Lucent 7705 SAR card type, removing the burden of
greatly augments the IP/MPLS RAN complex pre-engineering and future
transport solution from Alcatel-Lucent. scenario planning. The two adapter
card types supported in Release 1.0 are
Industry-leading scalability and density a 16-port ASAP T1/E1 adapter card and
is provided in the 8-slot, two rack unit an 8-port Ethernet adapter card.
(RU) version that supports up to 96 T1/E1
The ASAP adapter card supports ATM, Asynchronous Transfer Mode (ATM) Quality of service and
inverse multiplexing over ATM (IMA), over MPLS Networks (also known as traffic management
TDM and MLPPP. The Ethernet adapter draft-ietf-pwe3-atm-encap). The It is critical to maintain the end-to-end
card has six ports of auto-sensing 10/100 Alcatel-Lucent 7705 SAR supports N:1 quality of service (QoS) for packet traffic.
Base-T ports plus two further ports cell mode for transport of ATM-based Not all types of traffic have the same
supporting 10/100/1000 Base TX with services. Multiple access ATM ports are set of requirements. Voice traffic in
small form factor pluggable (SFPs) optics. bundled together to attain higher particular requires low latency and
Each slot is connected to the switching speeds using IMA. The IMA protocol jitter (latency variation) and also low
fabric on the CSM via a 1 Gb/s link to host is terminated on the Alcatel-Lucent loss, whereas data traffic often has
existing and future interface types. 7705 SAR and only the cells containing less stringent delay requirements but
user data belonging to a virtual may be very sensitive to loss, as packet
Service aggregation circuit/virtual path (VC/VP) structure loss can seriously constrain applica
and networking are transported. tion throughput. To offer the req
To provide the most efficient transport uired treatment throughout the
solution, the Alcatel-Lucent 7705 SAR In addition, the Alcatel-Lucent 7705 network, traffic flows with different
employs pseudowire encapsulation SAR supports RFC 4448 — Encapsu requirements are identified at the
(PWE3) methods to map services end lation Methods for Transport of access and marked in-line with the
to end. The use of pseudowires ensures Ethernet over MPLS Networks, which appropriate QoS metrics. Traffic
that the key attributes of the service specifies how Ethernet pseudowires classification and marking is carried
are maintained, while using a cost- can be used to transport Ethernet out based on the following:
effective packet environment to traffic across the packet network. To
aggregate services. offer greater scalability, all the traffic Classification (Layer 1/Layer 2/Layer
out of an Ethernet port can be carried 2.5 and/or Layer 3 header):
The Alcatel-Lucent 7705 SAR supports over a single Ethernet pseudowire or,
• Timeslot/port
RFC 5086 — Structure-Aware Time alternatively, a pseudowire can be
• Ethernet port/VLAN
Division Multiplexed (TDM) Circuit created for each VLAN that is assigned
to a different service or end-customer. • ATM service category
Emulation Service over Packet Switched
When dynamic signaling is deployed, (CBR/rt-VBR/nrt-VBR/UBR)
Network (CESoPSN) for the encapsu
lation and transport of TDM traffic, the end-to-end pseudowire is estab- • ATM VC
for example, 2G TDM services. The use lished using targeted label distribution • Ethernet 802.1p/VLAN
of circuit emulation service (CES) ensures protocol (T-LDP) and the MPLS tunnel • IP DSCP/MPLS EXP
that only the active timeslots are via LDP. In addition to efficient
transported, keeping bandwidth usage LDP-based dynamic signaling, static Marking:
to a minimum. The Alcatel-Lucent 7705 provisioning of both the MPLS tunnel
• Layer 2 (802.1p)
SAR also supports RFC 4717 — Encapsu and the pseudowire is also supported.
• Layer 2.5 (EXP) both for tunnel
lation Methods for Transport of
and PWE3
• Layer 3 (DiffServ)
7705 SAR
TDM TDM
BTS
Ethernet, MLPPP PSN/Metro Ethernet/ Ethernet, MLPPP ATM BSC
ATM SONET/SDH
7705 Ethernet
Node B
SAR
Ethernet 7710/7750 SR,
7670 RSP RNC
Telemetry
TDM Pseudowire
MPLS Tunnel ATM Pseudowire
Ethernet Pseudowire