Professional Documents
Culture Documents
Angle of Deflection Calculation Using Figure 1 and 2 At Front Bulkhead (6in) At Front Roll Hoop (6.75in) At Main Roll Hoop (10.5in) At Rearmost Node (7.75in)
Torsional Rigidity Calcaultion at point of interest
Setup
*Note Rear 2 uprights are fixed. front up rights have equal and opposite applied
force of 50lb
Rearmost Node Rearmost Node (On side of upwards force) Main Roll Hoop Main Roll Hoop (On side of upwards force) Springs in Series Calc
Simulation Hypotenuse 7.75 in Simulation Hypotenuse 10.5 in Total Torque 362.5 lb*ft
Weight Applied 50.0 lbs y-displacement 0.01 in Weight Applied 50.0 lbs y-displacement 0.0136 in
Force Applied to Moment Arm 21.8 in Angle of Deflection 0.0739300586 degrees Moment Arm 21.8 in Angle of Deflection 0.07421169707 degrees T/I + T/I + ... 0.1481417557
Rear Applied Moment 181.3 lb ft Applied Moment 181.3 lb ft
Measured Deflection 0.01 in Measured Deflection 0.0136 in I total torsional rigidity) 2446.980585 lb*ft/deg
Angle Deflection 0.0739300586 deg Angle Deflection 0.07421169707 deg
Torsional Rigidity 2451.6 ft*lbs/deg Torsional Rigidity 2442.3 ft*lbs/deg
Total Torsional Rigidity 1726.92078 lb*ft/deg Springs in Series Calc (Use tables above)
Total Torque 783.3
T/I + T/I + ... 0.4536011972
Total Torsional Rigidity 1726.92078