Professional Documents
Culture Documents
Product Specification
EP03-470-400
Release 400
July, 2010
TOC
Product Introduction ................................................................................................................................................ 4
Product Description & Features .............................................................................................................................. 4
FDM (Field Device Manager) .................................................................................................................................. 6
Fieldbus Testing and Validation .............................................................................................................................. 7
Fieldbus Host Interoperability Test. .................................................................................................................... 7
New Host Profile Registration Process ............................................................................................................... 7
Series-A (CIOM-A) FIM2 Architecture Overview..................................................................................................... 8
Series C FIM Architecture Overview ..................................................................................................................... 11
Combination Systems (FIM2, FIM4 and FIM8) ..................................................................................................... 12
H1 Power Conditioner Basics................................................................................................................................ 13
FOUNDATIONTM Fieldbus Performance Limits .................................................................................................... 14
FOUNDATIONTM Fieldbus Configuration Rules .................................................................................................... 20
FIM2 Configuration Rules ................................................................................................................................. 20
Redundant FIM2 Configuration Rules .............................................................................................................. 21
Mixed Redundant & Non-Redundant FIM2 Configuration Rules...................................................................... 21
Series C FIM (FIM4 & FIM8) Configuration Rules ............................................................................................ 22
Models and Specifications..................................................................................................................................... 23
CC-PFB401 (FIM4) Specifications.................................................................................................................... 23
Series C FIM4, IOTA Model Numbers .............................................................................................................. 23
CC-PFB801 (FIM8) Specifications.................................................................................................................... 24
Series C FIM8, IOTA Model Numbers .............................................................................................................. 24
TC-FFIF01, TK-FFIF01 FIM2 Specifications .................................................................................................... 26
TC-FFIF01, TK-FFIF01 FIM2 Specifications .................................................................................................... 27
CIOM-A FIM2, Cable and RTP Models ............................................................................................................ 27
CIOM-A FIM2 Unpowered RTPs ...................................................................................................................... 27
CIOM-A FIM2 RTP Specifications .................................................................................................................... 28
CIOM-A FIM2 Redundant Powered RTPs........................................................................................................ 28
Fieldbus Usage Licenses.................................................................................................................................. 29
Fieldbus Device Interoperability Testing ............................................................................................................... 30
Foundation Fieldbus Integration, Release 400 2
Foundation Fieldbus Integration, Release 400 3
Revision History
H1 Field Device: An H1 Field Device is a fieldbus device connected directly to an H1 fieldbus. Typical H1 Field
Devices are valves and transmitters.
Interoperability: Interoperability is the capability for a device from one manufacturer to interact with that of
another manufacturer on a Fieldbus network without loss of functionality.
Link: A Link is the logical medium by which H1 Fieldbus devices are interconnected. It is composed of one or
more physical segments interconnected by bus, Repeaters or Couplers. All of the devices on a link share a
common schedule, which is administered by that link's current LAS. It is the data link layer name for a network.
Network: A network as applied in this document is the termination of one or more Fieldbus segments into an
interface card of the host system.
Commentary:
In this document the term “link” and “network” will be used interchangeably.
Easy engineering with Control Builder. Control Builder engineering effort is required, and implementation time is
is the Experion PKS engineering tool for creating and minimal. Experion PKS provides flexibility to create your
configuring process control strategies, including those own custom detail displays. Experion PKS also features
utilizing Fieldbus. Time-saving Fieldbus-specific features device replacement directly from the operator station. A
such as: failed or troublesome device can be securely replaced with
a new or repaired one without need for engineering support.
Creation of FF device templates from vendor DDs
and EDDLs (starting in R400)
Uncommisioned
Devices
Full Support for Link Active Schedule and Backup Link Diagnostics are also provided for a potential failure or
Schedule. The Link Active Scheduler (LAS) can be problem with Fieldbus power. In the event of a power
considered the traffic cop that determines when and how problem on the RTP, IOTA or link, the FIM alerts the
every FF device (including the FIM) will access the H1 operator with a system alarm.
network and what data they will transfer. One device (at any
given time) is the LAS. Others can be assigned as backups FDM (Field Device Manager)
in the event the lead LAS fails (backup FIMs are always Experion Control Builder and Station provides the ability to:
considered the first backup LAS device). Other FF devices
Fully configure all Foundation registered FF devices
(using DDs or EDDLs)
Fully configure the control and logic scheme
http://www.fieldbus.org/
Foundation Fieldbus Integration, Release 400 8
The FIM2 can be located locally in the Control Processor Module (C200 or C200e) chassis, or remotely, up to 10 kilometers
away (in a down link I/O chassis). H1 link connections are made using the FIM2 RTP (remote terminal panel). As with all
FIMs, the FIM2 can be used with a control process or can be implemented as a standalone module. When a control
processor is used, the FIM2 can only interface with the C200 or C200e (not the C300).
Figure-7 provides a simplified diagram of a non-redundant FIM2 configuration. The FIM2 is shown here in the control
processor chassis, but it can also be placed into any remote I/O chassis. Not shown in this figure, is the connection between
processor chassis and the remote I/O chassis. This is accomplished using a CNI (ControlNet Interface) module in the control
processor and the remote chassis. All communications are over the I/O ControlNet media.
The FIM2 connects to an RTP (Honeywell or 3rd party, DIN rail mountable) that provides the connection point for each of the
two H1 networks. Up to 16 FF devices can then be connected to each H1 network. Not shown here is the power conditioner
that is required for each network. These are 3rd party components. For the CIOM-A FIM2, qualified third-party DIN-rail
mounted Remote Termination Panels (RTPs) allow link power to be maintained in the unlikely event the FIM is shut down or
disconnected.
Communications back to the EVS (Experion Server) is either over ControlNet or FTE. For ControlNet a CNI is used as the
interface module. For FTE an FTEB module is used.
FTE or
ControlNet
Series-A Chassis
I
n CPM FIM
t 2
r
ESV
RTP
H1 network 2
FF FF FF FF FF
D D D D Device
H1 network 1
FF FF FF FF FF
D D D D Device
Refer to Figure-8. This shows a simplified diagram of a FIM2 implemented in a redundant configuration. The primary and
backup FIM2 are located in two different chassis. They are synchronized via the RM (Redundancy Module) and a sync cable
interconnecting the two RM modules. Redundancy can be implemented in two processor chassis or by using two remote I/O
chassis.
Both primary and backup FIM2 use a common RTP (Honeywell or 3rd party, DIN rail mountable) that provides the connection
point for each of the two H1 networks. Up to 16 FF devices can then be connected to each H1 network. Not shown here is
the power conditioner that is required for each network. These are 3rd party components. For the CIOM-A FIM2, qualified
third-party DIN-rail mounted Remote Termination Panels (RTPs) allow link power to be maintained in the unlikely event the
FIM is shut down or disconnected.
Communications back to the EVS (Experion Server) is either over ControlNet or FTE. For ControlNet a CNI is used as the
interface module. For FTE an FTEB module is used.
FTE or
ControlNet
Series-A Chassis
I
n CPM RM FIM
t 2
r
Sync
ESV
RTP
I
n CPM RM FIM H1 network 2
t 2
FF FF FF FF FF
r D D D D Device
H1 network 1
FF FF FF FF FF
D D D D Device
The CIOM-A Fieldbus Interface Module (FIM2) connects to a DIN-rail mounted Remote Termination Panel (RTP) via a FIM
Cable (available in several lengths). Unpowered RTPs are available as standard Honeywell products, and powered RTPs
are available from P+F and MTL as described later in this document.
An RTP supports two (2) H1 Fieldbus link connections. CIOM-A FIMs can be placed in all rack locations that support Series
A Chassis I/O. Like the Series C FIM, the CIOM-A FIM does not require presence of the C200 controller.
The FIM may be used in either non-redundant or redundant configurations. A non-redundant FIM can be located in a C200
or remote I/O chassis and connects to a single Non-Redundant RTP. Redundant FIM pairs reside in redundant racks
following the same rules as C200 Controller and IO Link Module redundancy (racks must be identical in every way).
The Redundant RTP has two FIM cable connections, and each FIM in the redundant pair connects via a separate FIM cable.
The FIM4 module is provided in the Series-C form factor. As Figure 9 shows it can be mounted to a non-redundant or
redundant IOTA. The non-redundant IOTA is 6 inches long, while the redundant IOTA consumes 12 inches of channel
space. The user can implement the FIM4 as a non-redundant module by using the non-redundant IOTA, or by mounting only
one FIM4 (upper position) to a redundant IOTA. This will allow the user the option to easily add a second FIM4 later if
redundancy should become necessary.
Figure-9 also shows the various connection points. Note that 24 Vdc (to power the modules) is provided by mounting the
IOTA to the channel and carrier assembly. This 24 Vdc supply is isolated from the 24 Vdc that is provided by the separate
power conditioners connected to each of the four H1 networks. Each IOTA provides four H1 connectors (one for each of the
H1 networks). There are also FTE (grn & yel) connectors for each FIM4 module. The FIM4 FTE (IP) index address is also
set using the rotary switches on the IOTA. This represents the last octet of the four octets that make up the complete IP
address. A connector is provided for the power conditioners (from P+F and MTL) that are provided on Series C IOTAs and
mount on the standard Series C channel assemblies. This provides for easier wiring when these conditioners are used, but
the user can also implement conditioners from other 3rd party venders and hard wire the conditioners in using standard FF
H1 practices. Note that all power conditioners and the H1 network are isolated from the Series C power system.
The FIM4 is a standard FTE node. The FTE cables must be connected to a CF9 (Control Firewall). This can be the same
CF9 as the associated C300 or can be a separate CF9 in the case of a remote configuration. FIM4 can be used with a
control process or can be standalone. When used with a control processor it can only be a C300 (no C200 or C200e
allowed).
The FIM8 is new for R400 and can be considered a FIM4 with 4 additional H1 links. FIM8 has a redundant IOTA only. For
non-redundant configurations the FIM8 module is inserted into the upper module position of the redundant IOTA. The odd
and even FTE address is always consumed. The user can easily add a backup FIM8 at any time. Refer to Figure-9 and the
redundant FIM4 IOTA. The FIM8 IOTA is similar, but has 8 H1 connectors and 2 power conditioner connectors. Both IOTAs
are 12 inches long. At this time an RQUP is required for FIM8.
Non-Redundant Redundant
H1 (1) IOTA IOTA
FTE Green FTE Green
H1 (1) Primary
H1 (2) OK 3
H1 (2)
OK 3
Connector for
MTL & P+F power FTE Address
conditioners. Set odd address for primary FIM4
next even address is assumed for backup.
A typical device will use between 10 and 20 mA. The number of devices and the power consumed by each will determine the
size of the power conditioner (in amps) required. For the example below, assume each device requires 20 mA to operate
properly. The power conditioner would need to be capable of supplying 80 mA (4 x 20 mA).
A terminator must be placed at each end of the network to support proper communications.
Digital communications: Each device (when communicating on the H1 link) will toggle the 24 Vdc to generate the digital
portion of the H1 communications. An H1 power conditioner must have added circuitry to tolerate this digital component and
still provide the 24 Vdc required by each device. A standard of the shelve power supply could not provide this capability (this
is what makes the power conditioner unique). The FIM2, and FIM4 and FIM8 are considered a device with regard to this
example. Although they do not use any power from the conditioner for their operation, they will use about 10 mA when
signaling on the H1 link.
Power Conditioner Validation: Honeywell does not validate any 3rd party power conditioners at this time. Any power
conditioner that complies with the Foundation test specification FF-831 (Fieldbus Power Supply Test Specification) should
operate properly with the Honeywell FIM modules.
Power conditioners may provide other features that make them suitable for applications such as intrinsic safety. Refer to the
3rd party website for more details and features.
H1 network
+
Power
FF FF FF FF
T Conditioner device device device device T
Primary
Backup
MTL and P+F Conditioners: These venders have adapted there power conditioners to mount to standard Series C IOTAs
and provide RTPs in the case of the FIM2. More information is provided later in the document.
Foundation Fieldbus Integration, Release 400 14
ATTENTION!
The FIM8 Hardware will be released “after” the R400.1 release. R400.1 has
been qualified to support the FIM8 when the module is ready to be manufactured
and released to the field at a later TBD date.
All specifications for the FIM8 in this version of the Spec are subject to
change until the FIM8 is fully validated & released to the field.
All FIM performance & capacity specification are described in the following sections.
Acronyms*
In order to distinguish the different FIM Module types and their specific and joint specifications, the following acronyms will
be used in this section of the Spec.
FIM – If this acronym is used without a number, then the specification applies to all FIM module types.
FIM2 – The Series A chassis-based FIM used with the C200 Controller and supported on ControlNet or FTE (via FTEB).
This FIM supports 2 H1 Links and can be deployed in a redundant or non-redundant Series A Chassis.
FIM4 – A Series C FIM used with the C300 Controller and only supported on FTE. This FIM supports 4 H1 Links and can be
deployed in a redundant or non-redundant manner using the appropriate IOTA type.
FIM8 – A Series C FIM used with the C300 Controller and only supported on FTE. This FIM supports 8 H1 Links and can be
deployed in a redundant or non-redundant manner using the appropriate IOTA type.
Figure- 11 provides an overview of the FIM2, FIM4 and FIM8 communication architecture. Key concepts important to
understand are the following.
The Link Active Schedule (LAS) of each H1 network defines the scheduled publication of data and provides time for
unscheduled data access
The CDA subsystem uses both publish/subscribe and request/response mechanisms to deliver data to the requesting
clients
o The FIM’s PUBMETHOD parameters can be configured to specify the CDA Publish Data Rate per H1
Link between the FIM and its associated C200 or C300 controller.
Updating the cache with new/fresh values from the H1 networks and CDA delivery of data from the cache to the
interested clients should be thought of as independent activities
The freshness of data in the cache depends on the number of parameters in the cache, device performance, and the
unscheduled bandwidth available on the H1 networks.
FIM related specifications are presented in the tables following Figure 11.
Foundation Fieldbus Integration, Release 400 15
FIM
FF System Specifications
Note 1 – Any redundant and non-redundant combination cannot exceed 21 “Active/Primary” FIMs
Note 2 – With 21 FIM2s assigned under the same C200 or C200E Controller, the Cluster will only support 10 ESC or EST
Nodes. If more than 10 ESCs or ESTs is required, the maximum number of non-redundant FIM2s allowed is 20 or
less.
FF FIM Specifications
ATTENTION
FF FIM Specifications
Overall Data Access performance - CDA 1000 PPS 1600 PPS 2000 PPS
FIM Cache Parameter Refresh Rate 1 second minimum 1 second minimum 1 second minimum
Note: FIM Cache will refresh parameter values at a
maximum rate of once per second. If all parameters cannot
be refreshed within one second due to bandwidth
limitations, the FIM will allocate additional time as needed.
Actual performance will depend on number of parameters
within FIM Cache, device performance, and unscheduled
bandwidth available on H1 Network
Note 1 – This option provides a trade-off between controller performance and control end-end response time. Slower
publication will reduce the network traffic and the performance load on the controller, but increase the overall end-
end response time of a loop (assume AI and AO devices are on H1 and PID is in C300). Conversely, faster
publication will increase the network traffic and increase the performance load on the controller, but decrease the
overall end-end response time of a loop.
Foundation Fieldbus Integration, Release 400 18
FF H1 Network Specifications
Maximum Number of VCRs (Virtual Communication 64 per H1 Network, 128 per H1 128 per H1
128 per FIM2 Network, Network,
Relationships) per H1 Network
See Note 1 512 per FIM4 1024 per FIM8
Note: A VCR is a connection endpoint on the H1 Network. VCR
See Note 1 See Note 1
specifications are measured on a per H1 Network basis.
Each connected device reserves two VCRs. A published
connection between a CEE block and an FF block reserves one
VCR. A published connection with back initialization between a
CEE block and an FF block reserves two VCRs. Connections
between FF blocks on a single device or between multiple
devices do not reserve VCR resources on the FIM. It is
recommended that at least one VCR be left free to facilitate
device replacement and any control strategy reloading.
Maximum Scheduled Single-Variable Publications per 16 per H1 Network 16 per H1 Network 16 per H1 Network
Second per H1 Network
Note: Scheduled Single-Variable Publications per Second may
include publications from devices to other devices, from devices
to the FIM, and from the FIM to other devices.
Unscheduled Parameter Reads per Second per H1 16 per Fieldbus 16 per Fieldbus 16 per Fieldbus
Device, Device, Device,
Network
40 per H1 Network 40 per H1 Network 40 per H1 Network
Note: Unscheduled parameter read performance is provided as
a guideline. Actual performance will depend on device
performance and unscheduled bandwidth available on H1
Network.
Unscheduled Parameter Writes per Second per H1 5 burst, 1 sustained 5 burst, 1 5 burst, 1
per Fieldbus Device, sustained per sustained per
Network
20 burst, 5 sustained Fieldbus Device, Fieldbus Device,
Note: Unscheduled parameter write performance is provided as
per H1 Network 20 burst, 5 20 burst, 5
a guideline. Actual performance will depend on device and
sustained per H1 sustained per H1
unscheduled bandwidth available on H1 Network.
Network Network
Available Macrocycle Periods 250, 500 ms.; 1, 2, 4, 250, 500 ms.; 1, 2, 250, 500 ms.; 1, 2,
8, 16, & 32 sec. 4, 8, 16, & 32 sec. 4, 8, 16, & 32 sec.
Note 1 – Device reload or device replacement functionality requires at least one free VCR on a Fieldbus link/segment. If a
segment is configured with the maximum number of VCRs allowed (64 for the FIM2 or 128 for the FIM4), a device replacement
will not be able to done without freeing a VCR on the segment first. Freeing a VCR is typically done by deleting a CM or device
from the monitoring tree. Therefore, it is recommended that at least one VCR is kept free so that device reloads or replacement
will not require a VCR to be freed first. Control Builder will display a warning message when a segment is low on free VCRs.
Foundation Fieldbus Integration, Release 400 19
Maximum LAS Schedule Size 800 bytes/LAS 2000 bytes/LAS 2000 bytes/LAS
Note 1 - For a device template, among the (max) 32 conditions, there can only be 36 total references to device parameters.
For example, you can’t have each of the 32 conditions reference the same 2 parameters, since that would create 64
references. See following formula:
Parameter Specification
Module Type Series C module, conformally coated
Physical Interface H1 FOUNDATION Fieldbus
Number of H1 Networks per FIM 4
(Each network defined as a FOUNDATION Fieldbus 31.25 kbps H1 network)
Indicators on Module 24V Power, Module & FTE Status LEDs
Front display panel with module and link state
information
Indicators on IOTA 4 H1 Link Status LEDs (1 per Link)
Configurations Non-redundant or Redundant (side-by-side)
Electro-static Discharge IEC 1000-4-2: 1995
Power Dissipation 5.3 watts
Module Current 0.212 amps @ 25 Vdc
Link Connection IOTA directly
Parameter Specification
Module Type Series C module, conformally coated
Physical Interface H1 FOUNDATION Fieldbus
Number of H1 Networks per FIM 8
(Each network defined as a FOUNDATION Fieldbus 31.25 kbps H1 network)
Indicators on Module 24V Power, Module & FTE Status LEDs
Front display panel with module and link state
information
Indicators on IOTA 8 H1 Link Status LEDs (1 per Link)
Configurations Non-redundant or Redundant
Electro-static Discharge IEC 1000-4-2: 1995
Power Dissipation TBD
Module Current TBD
Link Connection IOTA directly
Redundant Powered IOTAs. The F660A Redundant Fieldbus Power IOTA, from MTL/Relcom, provides redundant power
for four H1 fieldbus links to a single Series C FIM IOTA, using two plug-in power modules per link. Each link includes a
switchable fieldbus segment terminator. Galvanic isolation is provided between the fieldbus segment and the input power
supplies. Output voltage and current are maintained even if one power module is available on a segment. A separate
module provides a FIM alarm in the event of a problem with any conditioning module or input. The F660A connects directly
to the Series C FIM IOTA via a multi-conductor cable.
For more information and specifications, contact MTL Incorporated, Houston, TX, at 713-341-7580.
The F860 Redundant Fieldbus Power IOTA from MTL/Relcom provides redundant, isolated conditioned power for eight (8)
H1 fieldbus links, servicing two (2) redundant or non-redundant Series C FIM IOTAs. It requires the same footprint as the
F660A, and so offers greatly improved space usage. Connection to the IOTAs uses the same multi-conductor cable as the
F660A. An on-board, link connected diagnostic module provides detailed H1 performance information about all 8 links. The
F660 can be powered either from the Series C cabinet power supply or from an external power source.
The Pepperl+Fuchs Fieldbus Power Hub IOTA provides redundant, isolated power for four H1 fieldbus links to a single
Series C FIM IOTA, using two plug-in power modules per link. An on-board, diagnostic module provides detailed H1
performance information about all 4 links. Both basic and advanced versions of the diagnostic module are available.
For details and pricing, contact Pepperl+Fuchs Inc., 1600 Enterprise Parkway, Twinsburg, OH 44087-2245, at 330 486-
0171.
Figure 14. Pepperl+Fuchs Fieldbus Power Hub IOTA with Diagnostic Module
Foundation Fieldbus Integration, Release 400 27
Model numbers for CIOM-A FIM2, Remote Termination Panels and cables are shown in the table below.
Figure 15. TC-FFRU01 -- Unpowered Fieldbus RTP Figure 16. TC-FFSU01 – Fieldbus RTP, Redundant,
(DIN-rails included but not shown) Unpowered (with DIN-rail mounts)
Foundation Fieldbus Integration, Release 400 28
Redundant Powered RTPs. For even greater robustness, Redundant Powered RTPs for use with FIM redundancy are
available from MTL and Pepperl+Fuchs. The MTL-Relcom F650A Redundant Fieldbus Power System provides
redundant Honeywell FIM connections as well as fully redundant, isolated power conditioners for each of two fieldbus
networks. For more information and specifications, contact MTL Incorporated, Houston, TX, 713-341-7580.
The Pepperl+Fuchs RTP for Honeywell Redundant FIM provides redundant FIM connections combined with non-
redundant power conditioners using high-reliability, passive components for each of two fieldbus networks. Up to 1 A of
conditioned power is available from each link. For details and pricing, contact Pepperl+Fuchs Inc., 1600 Enterprise
Parkway, Twinsburg, OH 44087-2245, (330) 486-0171.
Figure 17. MTL-Relcom F650A Redundant Figure 18. Pepperl+Fuchs RTP FieldConnex MB-FB-PC2-
Fieldbus Power System HON Power Conditioner System
(DIN-rails included but not shown) (DIN-rails included but not shown)
Foundation Fieldbus Integration, Release 400 29
Honeywell maintains a Fieldbus Interoperability Test Laboratory for testing FOUNDATION Fieldbus
devices with Experion. Although most devices integrate easily, in some cases device
manufacturers’ interpretations of the Fieldbus specifications may vary. When device
interoperability problems arise, Honeywell and the device manufacturer work together to create a successful integration.
Device Descriptor files for devices tested are made available on our public website at the following link:
http://www.honeywell.com/ps
From the home page select Products, then Control & Safety Systems, then Experion PKS, then Fieldbus
Interoperability Support link. It is not necessary to test devices to insure they will work correctly with the system, but we
are happy to test any device at no charge if requested to do so and testing is highly encouraged.
Use the links and instructions on this webpage to schedule a device for testing. There is no charge for devices that meet the
above criteria.
www.honeywell.com/ps
EP03-470-400
July 2010
Printed in USA
© 2010 Honeywell International Inc.