Professional Documents
Culture Documents
FLUXUS® F/G722
FLEXIM Austria GmbH
p Fast measuring dynamics
Phone: +43 33 26 529 81
p Certified for operation within hazardous areas ATEX/IECEx Zone 2, office@flexim.at
FM Class 1. Div. 2.
p High operational safety with no risk of leaks
FLEXIM Instruments Benelux B.V.
p Independent of pipe material, diameter, wall thickness and internal pressure Phone: +31 10 24 92 333 Synchronized Channel Averaging (SCA)
and temperature
Ultrasonic Meter
benelux@flexim.com
p Accurate and repeatable measurement readings – even at extremely low flow
rates (high turndown ratio)
FLEXIM France SAS
p Highly cost efficient in comparison to wetted instrumentation Phone: +33 4 27 46 52 10
info@flexim.fr
Inputs
Pt100/Pt1000
4-20mA active/passive FLEXIM Service and Support Center
Binary input South America, Argentina
Phone: +54 11 49 20 71 00
Digital communication
flexim@escoarg.com.ar
Modbus RTU/TCP
www.escoarg.com.ar
BACnet MSTP/IP
Profibus PA
Foundation Fieldbus FLEXIM AMERICAS Corporation, USA
Available Transducers ATEX/IECEx Zone 1 & 2 Phone: +1 63 14 92 23 00
Pipe size range (inner diameter) salesus@flexim.com
FLUXUS® F722 6 mm ... 6500 mm
FLUXUS® G722 7 mm ... 1600 mm
Temperature range (pipe wall)
FLUXUS® F/G722 -40 °C ... + 240 °C / WI: -200 °C ... +600 °C
For more detailed Information please download the Technical Specifications here: www.flexim.com. www.flexim.com
Cutting Edge Technology
Superior Performance
Completely non-Intrusive, free of
The FLUXUS® F/G722 is equipped with a state-of-the-art high-performance processor wear, tear, and abrasion
allowing for rapid channel switching between two independent channels for applications ______ ______
where fast respond time is needed. Both reflect path and X path configurations are
Not prone to clogging or corrosion The new FLUXUS F/G722 leverages the already superior capabilities and advanced signal processing techniques pioneered
suitable with the F/G722 ultrasonic meter thus ensuring applicability in a wide range
______ by Flexim’s clamp on metering solutions while introducing an even faster DSP processing module that enables Synchronized
of flow rates and process conditions.
Channel Averaging measurement.
No pressure loss or source of
In high velocity flows and applications where flow profile disturbances and high potential leaks and fugitive emissions p Synchronized Multi Channel Flow Averaging – High p Maintenance Free – No contact with flowing media results
turbulence is present, the new processing board enables the meter to collect and ______ in a completely maintenance-free and durable metering
performance processor for improved stability,
record data from multiple channels (A & B) at very high speeds, thus providing improved solution suitable for the harshest environments.
performance, and reliability in highly dynamic flows.
averaging performance in the averaging (Y) channel. Bidirectional communications
p Operational Safety –The measurement system can’t cause p Standard Flow and Mass Compensation – Pressure
and remote setup and diagnostic
pipe leaks, be prone to clogging or any other related issues and temperature inputs for built-in actual to standard
With this enhanced capability cross flow fluctuation effects are mitigated, and a better capabilities
that can hinder process integrity. volumetric and/or mass flow measurement.
representation of the flow profile is made, making the F/G722 the preferred metering ______
p Economical Solution – An externally mounted system
solution for demanding process control applications.
Digital Outputs: Frequency, binary means no need for process interruptions or additional
and pulse engineering costs.
2 3