Professional Documents
Culture Documents
Table of Contents
Page
A. GROUND TRANSPORTATION ............................................................................................................................ 5-2
1. Machine Preparation ..................................................................................................................................... 5-2
2. Loading the Machine ..................................................................................................................................... 5-3
B. LIFTING MACHINE ............................................................................................................................................... 5-4
1. Lifting Machine With Attachment Installed .................................................................................................. 5-4
2. Lifting Machine Without Attachment ............................................................................................................ 5-6
C. SHIPPING DIMENSIONS ...................................................................................................................................... 5-7
1. SK210LC-6E - Figure 5-7A ............................................................................................................................. 5-7
a. Machine With Standard Attachments ....................................................................................................... 5-7
b. Machine With Long Reach Attachments .................................................................................................. 5-7
c. Std. Boom With Arm Cylinder - Figure 5.7C ............................................................................................. 5-7
d. Arm With Bucket Cylinder - Figure 5.8A ................................................................................................... 5-8
e. Arm With Bucket Cylinder and Bucket - Figure 5.8B .............................................................................. 5-8
f. Bucket - Figure 5.8C .................................................................................................................................... 5-8
2. SK250LC-6E - Figure 5-9A & 5-9B ................................................................................................................. 5-9
a. Machine With Standard Attachments ....................................................................................................... 5-9
b. Machine With Long Reach Attachments .................................................................................................. 5-9
c. Std. Boom With Arm Cylinder - Figure 5.9C ............................................................................................. 5-9
d. Arm With Bucket Cylinder - Figure 5.10A ............................................................................................... 5-10
e. Arm With Bucket Cylinder and Bucket - Figure 5.10B .......................................................................... 5-10
f. Bucket - Figure 5.10C ................................................................................................................................ 5-10
5
3,070 mm (10'-1")
3,770 mm (12'-4")
150 mm (5.9")
700 mm
(2'-4")
530
(1'9")
Dimensions and weights are with 2.94 m SHOES 600 mm 700 mm 800 mm 900 mm
(9’-8”) arm, 0.81 m3 (1.06 yrd3) bucket and
5 5.65 m (18’-6”) boom. MODEL
(23.6") (27.6") (31.5") (35.4")
trailer.
Bucket Weight: 650 Kg (1,430 Lbs)
FIGURE 5.2A
10,100 mm (33'-2") 2,360 mm (7'-9")
3,140 mm (10'-4")
50 mm (2")
3,800 mm (12'-6")
100 mm (3.9")
660 mm
(2'-2")
FIGURE 5.2B
SK210LC/SK250LC–6E Dynamic Acera OM, 11/02 Rev. 0
5-2
TRANSPORTATION
2. Loading the Machine
THROTTLE
POTENTIOMETER
WARNING
NEVER ATTEMPT TO LOAD OR UNLOAD MACHINE WITH-
OUT RAMPS.
CAUTION 15º or
less
5
Place a cover over the exhaust pipe of the machine and
secure to avoid water entering the engine, and possible
turbo damage.
WARNING
DO NOT TRY TO LOAD MACHINE WITHOUT ATTACHMENT IN
CAUTION THIS TYPE OF TRAILER. MACHINE COULD TIP OVER. THIS
ILLUSTRATION IS FOR DEMONSTRATION ONLY.
YN20T01238P1 FIGURE 5.3B
WARNING
TO PREVENT ARM AND BUCKET CYLINDER DAMAGE, DO
NOT HAVE THE CYLINDER RODS FULLY EXTENDED DURING
LOADING AND UNLOADING OPERATIONS. THIS WILL AVOID
SUDDEN AND ABRUPT CONTACT OF THE ARM OR BUCKET
WITH A TRAILER DECK, RAMP OR THE GROUND; WHICH
COULD RESULT IN STRETCHING THE CYLINDER ROD(S).
PY20T01073P1
DO NOT CHAIN THE ATTACHMENTS WITH THE ARM AND/OR
BUCKET CYLINDER ROD(S) FULLY EXTENDED. THIS WILL
AVOID DAMAGE CAUSED BY ABRUPT MOVEMENTS DURING
Prior to transporting a long reach attachment equipped
TRANSPORTATION.
machine, the arm must be fully retracted and attachment
lowered. Make sure the link between the boom and arm
is properly installed to prevent damaging the arm and
the arm cylinder during transportation.
YQ105LR4Transport
YQ105SafetyLeverUp
FIGURE 5.3C
form.
B
A B
(Between 1st & 2nd (Between the last
front roller) two rollers)
CAUTION
5 Place a hardwood or steel block between cables and
crawler frame to prevent damage to the tracks from
cables during lifting. See Figure 5.4C.
SECURE
ATTACHMENT
YQ105SecureMachine
FIGURE 5.4A
BLOCK
B. LIFTING MACHINE
YQ105BlockonCrawler
The following procedures are for lifting the machine,
as built by KOBELCO. These procedure do not take FIGURE 5.4C
into account modifications made to the machine
that affect machine weight or center of gravity.
WARNING
1. Lifting Machine With Attachment Installed
a. Locate lifting locations at the front and rear ALWAYS USE PROPER LIFTING EQUIPMENT AND
of each crawler frame. See Figure 5.4B. DEVICES. USE OF IMPROPER LIFTING EQUIPMENT
b. Attach cables or wire rope with a capacity COULD ALLOW THE LOAD TO SHIFT OR FALL
rating sufficient to lift the machine, at lifting CAUSING SEVERE DAMAGE, SERIOUS INJURY OR
locations. DEATH.
2,000 mm (6'-7")
WARNING A B
DO NOT USE THE COUNTERWEIGHT
(45 )
LIFTING EYES TO LIFT MACHINE (45 )
(13 )
) (12 4,000 mm (13'-1")
CENTER OF GRAVITY
3,400 mm (11'-2")
5
75 mm YQ105LiftingB98
WEIGHT : 21,200 kg (46,700 lbs) (3")
695 mm 635 mm
ARM : 2.94 M (9'-8")
(27.4") (25")
SHOE : 800 mm (31.5")
MODEL : SK210LC-6E PLACE BLOCK BETWEEN
EACH CABLE AND FRAME
Note: Lifting machine with wider track shoes
will tend to shift the Center of Gravity slightly
forward, toward the center of the slewing ring.
FIGURE 5.5A
YQ105LiftingB99
135 mm
WARNING 710 mm
(28")
(5.3")
675 mm
(26.6") Note: Lifting machine with wider track shoes
DO NOT USE THE COUNTERWEIGHT will tend to shift the Center of Gravity slightly
PLACE BLOCK BETWEEN
LIFTING EYES TO LIFT MACHINE
EACH CABLE AND FRAME forward, toward the center of the slewing ring.
FIGURE 5.5B
SK210L)/SK250LC–6E Dynamic Acera OM, 11/02 Rev. 0
5-5
TRANSPORTATION
2. Lifting Machine Without Attachment
Pass the cables through the lifting points on the TOOLS {SK210LC-6E}
crawlers as indicated in page 5-4 and bring ITEM SIZE Q’TY
loose ends of cables together at machine cen-
CABLE A 33.5 X 15.6 m 1
ter of gravity and attach to an overhead lifting
device with a rated lifting capacity sufficient to CABLE B 33.5 X 14.9 m 1
lift the machine. See Figures 5.6A to 5.6B for SPREADER BARS C 4.0 m 2
better reference.
WEIGHT : 17,600 kg (38,720 lbs)
SHOE : 800 mm (31.5")
2,000 mm (6'-7")
C
MODEL : SK210LC-6E A
B (45 )
(45 )
(2
0
)
(5 ) 4,000 mm (13'-1")
CENTER OF GRAVITY
3,400 mm (11'-2")
750 mm YQ105LiftB98noAtt
695 mm (29.5") 635 mm
(27.4") (25") Note: Lifting machine with wider track shoes
PLACE BLOCK BETWEEN will tend to shift the Center of Gravity slightly
5 EACH CABLE AND FRAME forward, toward the center of the slewing ring.
FIGURE 5.6A
TOOLS {SK250LC-6E}
ITEM SIZE Q’TY
WARNING
CABLE A 37.5 X 16.0 m 1
DO NOT USE THE COUNTERWEIGHT LIFTING
CABLE B 37.5 X 15.1 m 1
EYES TO LIFT MACHINE
SPREADER BARS C 4.0 m 2
C
MODEL : SK250LC-6E A
B
(45 )
(45 )
(2
4,000 mm (13'-1")
2
(4 )
)
CENTER OF GRAVITY
3,400 mm (11'-2")
845 mm YQ105LiftB99noAtt
2,930mm (9'-7")
1,060mm
(3'-6")
450mm
(17.7")
YQ105B98dimensions 4,450mm 14'-7'' (31.5") 800mm
4,960mm (16'-3'') 3,190mm (10'-6'')
4,820mm (15'-10'')
FIGURE 5.7A
L: 935 mm
(36.8")
L H
O
Machine weight N
3.66 (12' 0") 2.39 (7' 10")
With 800 mm shoes: 23,000 Kg (50,700 Lbs) H: 1.06 (3' 6")
With 900 mm shoes: 23,300 Kg (51,400 Lbs) 4.45 (14' 7") N: 800 mm (31.5") 3.19 (10' 6")
B98LR dimension O: 450 mm (17.7")
4.96 (16' 3")
FIGURE 5.7B
Boom
5650 (18' - 6")
mm (ft-in)
FIGURE 5.7C
Arm 2400 mm (7' 10") 2940 mm (9' 8") 3330 mm (10' 10")
LxHxW
3380 x 828 x 348 3901 x 821 x 348 4310 x 821 x 348
mm (ft-in)
(11' 1"x2' 7"x1' 2") (12' 10"x2' 8"x1' 2") (14' 2"x2' 8"x1' 2")
Weight
w/Bucket Cyl. 880 (1936) 980 (2156) 1050 (2310)
Kg (lbs)
H
L
FIGURE 5.8A
LxHxW
4733 x 890 x 1330 5254 x 890 x 1160 5663 x 890 x 1080
mm (ft-in)
(15' 7"x2' 11"x4' 4") (17' 3"x2' 11"x3'10") (18' 6"x2' 11"x3' 7")
5 Weight
1520 (3344) 1620 (3570) 1650 (3640)
Kg (lbs)
FIGURE 5.8B
FIGURE 5.8C
2,920mm (9'-7")
1,040mm
(3'-5")
450mm
(17.7")
4,660mm (15'-3'') (31.5") 800mm
YQ105B99dimensions
5,270mm (17'-3'') 3,390mm (11'-1'')
FIGURE 5.9A
b. Machine With Long Reach Attachments b.1- Long Reach Boom - 10.35 m (33’-11”)
Refer to Figure 5.9B for reference in regards b.2- Long Reach Arm - 8.25 m (27’-1”)
b.3- Bucket - 0.40 m3 (0.52 yard3)
to the machine basic dimensions, as manu-
factured by KOBELCO, with long reach at- 5
tachments:
L: 980 mm
(38.6")
L H
O
Machine weight N
3.85 (12' 8") 2.59 (8' 6")
With 800 mm shoes: 27,200 Kg (59,966 Lbs) H: 1.04 (3' 5")
With 900 mm shoes: 27,500 Kg (60,227 Lbs) 4.66 (15' 3") N: 800 mm (31.5") 3.39 (11' 1")
B99LR dimension O: 450 mm (17.7")
5.27 (17' 3")
FIGURE 5.9B
Boom
6020 (19' - 9")
mm (ft-in)
H
FIGURE 5.9C
Arm 2500 mm (8' 2") 2980 mm (9' 9") 3660 mm (12' 0")
LxHxW
3590 x 901 x 352 4048 x 896 x 352 4800 x 896 x 352
mm (ft-in)
(11' 9"x3' 0"x1' 2") (13' 3"x2' 11"x1' 2") (15' 9"x2' 11"x1' 2")
Weight
w/Bucket Cyl. 1060 (2340) 1110 (2450) 1270 (2800)
Kg (lbs)
H
L
FIGURE 5.10A
Arm 2.50 m (8' 2") Arm 2.98 m (9' 9") Arm 3.66 m (12' 0")
Combination Bucket 1.20 m3 (1.57 yrd3) Bucket 1.00 m3 (1.31 yrd3) Bucket 0.81 m3 (1.06 yrd3)
LxHxW
4733 x 890 x 1440 5254 x 890 x 1160 5663 x 890 x 1060
mm (ft-in)
(15' 7"x2' 11"x4' 9") (17' 3"x2' 11"x3'10") (18' 6"x2' 11"x3' 6")
5 Weight
1940 (4280) 1940 (4280) 2010 (4400)
Kg (lbs)
FIGURE 5.10B
FIGURE 5.10C