Professional Documents
Culture Documents
degree thermal
Date: 20 Juli 2013
Designer: FAJAR PUTRA AJIATNA
Study name: thermal 8b
Analysis type: Thermal(Transient)
Table of Contents
Description............................................ 1
Assumptions .......................................... 2
Model Information ................................... 2
Study Properties ..................................... 3
Units ................................................... 3
Material Properties .................................. 4
Description Thermal Loads........................................ 4
No Data Contact Information................................. 5
Mesh Information .................................... 6
Sensor Details ........................................ 7
Study Results ......................................... 8
Conclusion ............................................ 8
Assumptions
Model Information
Revolve1
Mass:0.00778187 kg
Volume:9.89922e-007 m^3 E:\FAJAR PUNYA\Split
Solid Body Density:7861.1 kg/m^3 Ring Energize.SLDPRT
Weight:0.0762623 N Jul 12 14:04:24 2013
Revolve1
Mass:0.139715 kg
Volume:1.77729e-005 m^3 E:\FAJAR PUNYA\test sub
Solid Body Density:7861.1 kg/m^3 mix.SLDPRT
Weight:1.3692 N Jul 12 14:04:24 2013
Study Properties
Study name thermal 8b
Analysis type Thermal(Transient)
Mesh type Solid Mesh
Solver type Direct sparse solver
Solution type Transient
Total time 1 Seconds
Time increment 0.1 Seconds
Contact resistance defined? No
Result folder SolidWorks document (E:\FAJAR PUNYA)
Units
Unit system: SI (MKS)
Length/Displacement mm
Temperature Kelvin
Angular velocity Rad/sec
Pressure/Stress N/m^2
Material Properties
Model Reference Properties Components
Name: MS-384 (9) SolidBody 1(Revolve1)(New
Model type: Linear Elastic Isotropic Adapter Body-1)
Default failure Max von Mises Stress
criterion:
Thermal 42.7 W/(m.K)
conductivity:
Specific heat: 477.295 J/(kg.K)
Mass density: 7861.1 kg/m^3
Curve Data:N/A
Name: MS-279 (9) SolidBody 1(Revolve1)(Split
Model type: Linear Elastic Isotropic Ring Energize-1),
Default failure Max von Mises Stress SolidBody 1(Revolve1)(test
criterion: sub mix-1)
Thermal 42.6 W/(m.K)
conductivity:
Specific heat: 473.108 J/(kg.K)
Mass density: 7861.1 kg/m^3
Curve Data:N/A
Thermal Loads
Time curve
Contact Information
Mesh Information
Mesh type Solid Mesh
Mesher Used: Curvature based mesh
Jacobian points 4 Points
Maximum element size 0 in
Minimum element size 0 in
Mesh Quality High
Remesh failed parts with incompatible mesh Off
Sensor Details
No Data
Study Results
Conclusion