Professional Documents
Culture Documents
Version : 5.5.0
© 2021 CERSA-MCI
web: http://www.cersa-mci.com
email: sale@cersa-mci.com, support@cersa-mci.com
2 CIM. Cersa Instruments Manager. User's manual.
Table of Contents
Version : 5.5.0
Part I: Quick Start
Install Instruments
4
1 Install Instruments
Mount the instruments in production line or place it in laboratory desk.
Install accessories like wire sample rotation (WSR) or foot pedal if required.
Plug in air supply for the instrument if necessary.
Connects digital input output instrument interface with your process control system.
Connects BNC analog outputs with your process control system.
Connects RS232 instrument interface with the PC.
Keep in mind the PC COM port used for each instrument.
Plug in power supply for the instrument.
2 CIM startup
Install CIM
Your instrument has been delivered with CERSA-MCI USB drive (blue color).
Launch the setup manually from you drive at the following location: USB drive:\Setup\CIM.exe
Follow step by step the setup procedure displayed on the screen.
Protection key
Plug the USB protection dongle (green color) to benefit the full production and laboratory
features. Refer to key protection in CIM manual.
Configure CIM
Version : 5.5.0
Part I: Quick Start
Add connexions
6
3 Add connexions
Add your connexions (CERSA instruments) in the connexions manager interface.
Production
Laboratory
7- Add the instrument.
8- The instrument is added in the connexions table. The status can be either ok or warning:
Warning: for example if the temperature is not stable or the user don't put any product to measure.
See "Connexion Manager" in CIM manual for more information about additional configuration.
Version : 5.5.0
Part I: Quick Start
CIM Prod
8
4 CIM Prod
Once the connexions setup finish you can configure printer for reports, line name, file record
location, product tolerances and use manual controls to begin the production.
2. Configure CIM ID if you have more than one instance of CIM in your factory. Different ID for
each computer.
3. Open report configuration interface.
Version : 5.5.0
Part I: Quick Start
CIM Prod
10
Version : 5.5.0
Part I: Quick Start
CIM Prod
12
4 2
5
5
Version : 5.5.0
Part I: Quick Start
CIM Prod
14
1 3
2
6
4. If out of tolerances occurs an event is displayed in the bottom graph as line:
5. If a problem occurs a point is displayed4 in the bottom graph
5 in the status line.
6. In the right side of the window are displayed the real time measures values and out of
tolerances alarms:
7. The status of the connexion is displayed in the top right side of the main window.