Professional Documents
Culture Documents
SFU Technical Catalogue
SFU Technical Catalogue
Larsen & Toubro is a technology-driven USD 8.5 billion company that infuses engineering with
imagination. The Company offers a wide range of advanced solutions in the field of Engineering,
Construction, Electrical & Electronics, Machinery and Information Technology.
L&T Switchgear, which forms part of the Electrical & Automation business, is India's largest
manufacturer of low voltage switchgear, with the scale, sophistication and range to meet global
benchmarks. With over four decades of experience in this field, the Company today enjoys a
leadership position in the Indian market with growing presence in international markets.
It offers a complete range of products including controlgear, powergear, motor starters, energy
meters, wires and host of other accessories. Most of our product lines conform to international
standards, carry CE markings and are certified.
L&T has been market leader for Switch-Disconnector Fuse for more than decades. L&T now
introduces C-Line the new generation of changeover switch-Disconnectors.
C-Line offers you a unique series of changeover Switches combining compactness with high
performance, thus, making C-line a state-of-the-art product in changeover technology.
The C-line range covers ratings from 63 A to 1000 A in 5 frame size. These changeover are
available in open execution SS enclosures and fused version (type DIN / BS fuses)
Frame 1 SS enclosure
Frame 2
BS fuses
Frame 3
2 6 4
9
3 Source separator
Source separator is used to isolate two incoming supplies and to eliminate possibility of flash over
between two supplies due to accidental falling of external objects.
4 Inter-phase barriers
Inter-phase barriers are provided for additional safety to eliminate possibility of inter-phase
short-circuit.
O
contacts.
N
6 Staggered terminals
Patented dual dead center mechanism enables the user to opt between central or side shaft
positions for operating handle. This can be easily converted on site as required.
It consists of two auxiliary contacts, each with 1 NO + 1 NC. This kit is pre-wired with
terminal blocks and can betted at the site without increasing overall dimension.
9 Handle
The Changeover Switch has a unique flip-able operating handle for ratings 400 Amp and above
which enables user to operate the switch with two hands. The handle also offers the following
features:
One hand type handle Two hand type for above Changeover unit pad
up to 315 A rating 400 A rating lockable in OFF state by 3 pad locks
Superior Performance
Contact system is of double break, knife type having self wiping action with
electrodynamic compensation. This ensures reliable performance during normal as well as
most severe short circuit fault conditions, offering higher short-time withstand rating.
Highest life
C-line switch offers highest electrical and mechanical life in compact frame sizes.
The electrical and mechanical life are two times the requirement of the standard.
Four pole conguration is with 100% neutral rating. 150% & 200% neutral ratings
are also available.
Factory fitted external shorting links can be easily removed and fitted on the other
side as required at site. This gives more flexibility at the time of installation.
The C-line range provides generous terminal capacity in its compact size
facilitating aluminium termination.
Higher ground clearance between terminals and mounting base plate ensures
adequate clearance even after connecting cables. This eliminates the possibility
of phase to ground flashover.
Total safety
Onload Changeover S-Ds are available from 63 A to 1000 A. The range is covered through
5 frames as shown below.
3 250 315
4 400 630
Versions
C-line Changeovers are available with and without fuses, suitable for open
execution and in sheet steel (SS) enclosures.
Onload Changeover S-Ds are available in sheet steel enclosure with adequate space for
cable terminations so that additional cable entry boxes are not required. Cable gland
plates are also provided with the switch. Enclosure provides IP54 protection
The Changeover S-Ds can be easily converted to fused version at site by using
fuse conversion kit. It provides the benefits of overload and short circuit protection
through the fastest switching device-fuse, and is suitable for knife type (DIN) and bolted
type (DIN) and bolted type (BS) fuse links. Use of L&T HN fuse links reduces watt loss.
Technical Speci cations
Rating (A) Unit 125 A 160 A 200 A 250 A 315 A 400 A 630 A 630 A 800 A 1000 A
Fuse Conversion Kit is available with knife type (DIN) and bolted type (BS) fuse links.
Changeover Switch can be converted to fused version at site.
Castell lock
Accessory to lock the Changeover Switch in OFF state and using this can have interlocking
schemes with MCCB / ACB.
Onload changeover switches
Description 125 A 160 A 200 A 250 A 315 A 400 A 630 A 630 A 800 A 1000 A
Onload Changeover CO21250OOOO CO21600OOOO CO22000OOOO CO32500OOOO CO33150OOOO CO44000OOOO CO46300OOOO CO56300OOOO CO58000OOOO CO51000OOOO
Switch-Disconnector
Onload Changeover CO21250OSOO CO21600OSOO CO22000OSOO CO32500OSOO CO33150OSOO CO44000OSOO CO46300OSOO CO56300OSOO CO580000OSOO CO51000OSOO
in SS enclosure
Source Separator
CX20009OOOO CX30009OOOO CX40009OOOO CX50009OOOO
Overall Dimensions CO2 - 125 / 160 / 200
Open Execution In SS Enclosure
A B C D E
CO2-125 22 3 138 121 220
CO2-160 22 3 138 121 203
97
CO2-200 26 5 150 121 204
7
PANEL DOOR
340
130
243
MAINTAIN DISTANCE INSIDE OF
PHASE BARRIER
CUBICLE TO BE 241 + 1
9
267
154
112
B
30
A
42
190 MOUNTING
4 NOS. MOUNTING
350 (MOUNTING)
HOLES SUITABLE CONTACT BLOCK
FOR M6 SCREWS
AUXILIARY
211 WITH ACCESSORIES
120 MOUNTING
D
4 NOS. MOUNTING
HOLES SUITABLE
FOR M8 SCREWS
213 (MOUNTING)
44 44 44 M4 SCREWS
FOR EARTHING
210
(2 NOS.)
PANEL DOOR
FUSE PHASE BARRIER PANEL DOOR
* FUSE LINK
* FUSE LINK
MAINTAIN DISTANCE INSIDE OF
NEUTRAL POLE
PHASE
NEUTRAL POLE
CUBICLE TO BE 276 + 1
BARRIER PHASE
BARRIER
302
302
255
245
255
225
E
170
170
112
112
A
30
42
30
A
42
AUXILIARY
208 WITH ACCESSORIES
120 MOUNTING
D
44 44 44 M4 SCREWS
44 44 44 M4 SCREWS
FOR EARTHING
210 FOR EARTHING
(2 NOS.) 210
(2 NOS.)
A B C D
CO3-250 29 4.5 182 156
CO3-315 35 5 198 164
97.4
7
PANEL DOOR
378.4
113
281
PHASE BARRIER
CUBICLE TO BE 276 + 1
11
301
390
193
138
B
39
A
235.4 MOUNTING 54
285
4 NOS. MOUNTING
350 (MOUNTING)
CONTACT BLOCK
HOLES SUITABLE
FOR M8 SCREWS
AUXILIARY
570
239 WITH ACCESSORIES
159 MOUNTING
4 NOS. MOUNTING
HOLES SUITABLE
FOR M8 SCREWS
110
M10 BOLT 88.5 213 (MOUNTING)
56 56 56 M4 SCREWS
FOR EARTHING
260
(2 NOS.)
NEUTRAL POLE
PHASE
NEUTRAL POLE
CUBICLE TO BE 324 + 1
BARRIER PHASE
BARRIER
351
351
293
292
292
282
277
207
207
138
138
A
39
54
39
A
54
AUXILIARY
239 WITH ACCESSORIES
159 MOUNTING
D
D
M10 BOLT
A
CO4-400 5
7
CO4-630 6 PANEL DOOR
107.4
130
CUBICLE TO BE 290 + 1
12
399.4
316
292
210
151
465
42
40 4 NOS. MOUNTING
58
HOLES SUITABLE
FOR M8 SCREWS
286 MOUNTING
4 NOS. MOUNTING
CONTACT BLOCK
HOLES SUITABLE
366
FOR M8 SCREWS
AUXILIARY
329 WITH ACCESSORIES
600 (MOUNTING)
200 MOUNTING
732
202
228
M12 BOLT
70 70 70 M4 SCREWS
66
FOR EARTHING
310
(2 NOS.) 346 (MOUNTING)
59.5
NEUTRAL POLE
PHASE
NEUTRAL POLE
CUBICLE TO BE 360 + 1
BARRIER PHASE
BARRIER
386
386
332
320
332
321
298
283
227
227
151
151
40
42
58
42
40
58
AUXILIARY
329 WITH ACCESSORIES
200 MOUNTING
202
228
202
228
M12 BOLT
A
CO5-630 6
CO5-800 8
107.9
CO5-1000 8
445
337.1
164
CUBICALE TO BE 330 + 1
359.8
510
247.7
182
A
45
66.7
402
50
380 TERMINAL SHROUD
17.5 345 MOUNTING
4 NOS. MOUNTING
600 MOUNTING
HOLES SUITABLE
FOR M8 SCREWS
804
351.6 WITH ACCESSORIES
AUXILIARY
MINIMUM HINGE 255
220 MOUNTING
CONTACT BLOCK
DISTANCE 255 mm
228
264
M5 SCREWS
102
15
FOR EARTHING
(2 nos.)
80 80 80 82 346 MOUNTING
M16 BOLT
FUSE FUSE
8
PHASE PHASE
BARRIER BARRIER
6
459.5
459.5
403.6
403.6
377
365
353
329.6
263.6
263.6
182
182
A
66.7
45
45
66.7
50 50
TERMINAL BLOCK
351.6 WITH ACCESSORIES
AUXILIARY
CONTACT BLOCK
220 MOUNTING
220 MOUNTING
* SUITABLE FOR
SUITABLE FOR L&T MAKE
* FUSE LINKS.
228
264
L&T MAKE
264
228
FUSE LINKS.
M5 SCREWS
15
15
M5 SCREWS
FOR EARTHING
SUITABLE FOR EARTHING
(2 NOS.)
SUITABLE (2 NOS.)
FOR 92 92 92 92
M16 BOLT FOR 380
380 M16 BOLT
All Dimensions are in mm. *Fused version not available for 1000A 14
Electrical Standard Products (ESP) Branch Offices:
REGISTERED OFFICE AND L&T House, Group MIG - 5 Plot No. 518
HEAD OFFICE Padmanabhpur 4th Main Road
L&T House, Ballard Estate Durg 491 001 K. K. Nagar
P. O. Box 278 Tel: 0788-2213833 / 14 / 28 / 29 Madurai 625 020
Mumbai 400 001 Fax: 0788-2213820 Tel: 0452-2537404, 2521068
Tel: 022-6752 5656 Fax: 0452-2537552
Fax: 022-6752 5858 A1/11, Astronauts Avenue e-mail: esp-mdu@LNTEBG.com
Website: www.Larsentoubro.com Bidhan Nagar
Durgapur 713 212 EBG North Wing Office - 2
Tel: 0343-2536891 / 8952 / 7844 Powai Campus
ELECTRICAL STANDARD PRODUCTS (ESP) Fax: 0343-2536493 Mumbai 400 072
501, Sakar Complex I e-mail: esp-dgp@LNTEBG.com Tel: 022-67052874 / 2737 / 1156
Opp. Gandhigram Rly. Station Fax: 022-67051112
Ashram Road Milanpur Road, Bamuni Maidan e-mail: esp-bom@LNTEBG.com
Ahmedabad 380 009 Guwahati 781 021
Tel: 079-66304007-11 Tel: 0361-2651297 #12, Shivaji Nagar
Fax: 079-26580491 / 66304025 Fax: 0361-2551308 North Ambazari Road
e-mail: esp-ahm@LNTEBG.com e-mail: esp-gau@LNTEBG.com Nagpur 440 010
Tel: 0712- 2260012 / 3
38, Cubbon Road, Post Box 5098 II Floor, Vasantha Chambers Fax: 0712- 2260020 / 30
Bangalore 560 001 5-10- 173, Fateh Maidan Road e-mail: esp-nag@LNTEBG.com
Tel: 080-25020100, 25593613 Hyderabad 500004
Fax: 080-25580525 Tel: 040-66720250 32, Shivaji Marg
e-mail: esp-blr@LNTEBG.com Fax: 040-23296468 P. O. Box 6223
e-mail: esp-hyd@LNTEBG.com New Delhi 110 015
Tel: 011-41419514 / 5 / 6
131/1, Zone II
Fax: 011-41419600
Maharana Pratap Nagar D-24, Prithvi Raj Road, C-Scheme
e-mail: esp-del@LNTEBG.com
Bhopal 462 011 Jaipur 302 001
Tel: 0755-4098706 / 7 / 8 / 9 Tel: 0141-2385916 / 8
L&T House
Fax: 0755-2769264 Fax: 0141-2373280 P. O. Box 119
e-mail: esp-bho@LNTEBG.com e-mail: esp-jai@LNTEBG.com 191/1, Dhole Patil Road
Pune 411 001
Plot No. 559, Annapurna Complex Akashdeep Plaza, 2nd Floor Tel: 020-26135048
Lewis Road P. O. Golmuri Fax: 020-26124910, 26135048
Bhubaneswar 751 014 Jamshedpur 831 003 e-mail: esp-pnq@LNTEBG.com
Tel: 0674-6451342, 2436696 Jharkhand
Fax: 0674-2537309 Tel: 0657-2340864 / 387 3rd Floor
e-mail: esp-bbi@LNTEBG.com Fax: 0657-2341250 Vishwakarma Chambers
e-mail: esp-jam@LNTEBG.com Majura Gate, Ring Road
SCO 32, Sector 26-D Surat 395 002
Madhya Marg, P. O. Box 14 Skybright Bldg. M. G. Road Tel: 0261-2473726
Chandigarh 160 026 Ravipuram Junction, Ernakulam Fax: 0261-2477078
Tel: 0172-4646841 to 7 Kochi 682 016 e-mail: esp-sur@LNTEBG.com
Fax: 0172-4646802 Tel: 0484-4409420 / 4 / 5 / 7
e-mail: esp-chd@LNTEBG.com Fax: 0484-4409426 Radhadaya Complex
e-mail: esp-cok@LNTEBG.com Old Padra Road
10, Club House Road Near Charotar Society
Chennai 600 002 3-B, Shakespeare Sarani Vadodara 390 015
Tel: 044-28462072 / 4 / 5 / 2109 Kolkata 700 071 Tel: 0265- 2311744 / 6613610 / 1 / 2
Fax: 044-28462102 / 3 Tel: 033-44002572 / 3 / 4 Fax: 0265-2336184
e-mail: esp-maa@LNTEBG.com Fax: 033-22822589 e-mail: esp-bar@LNTEBG.com
e-mail: esp-ccu@LNTEBG.com
67, Appuswamy Road 48-8-16, Dwarakanagar
Post Bag 7156 A28,Indira Nagar, Faizabad Road Visakhapatnam 530 016
Opp. Nirmala College Uttar Pradesh, Tel: 0891-6620411-2 / 3
Coimbatore 641 045 Lucknow 226 016 Fax: 0891-6620416
Tel: 0422-2588120 / 1 / 5 Tel: 0522-2312904 / 5 / 6 e-mail: esp-viz@LNTEBG.com
Fax: 0422-2588148 Fax: 0522-2311671
e-mail: esp-cbe@LNTEBG.com e-mail: esp-Lko@LNTEBG.com
Product improvement is a continuous process. For the latest information and special applications, please contact any of our offices listed here.
SP 50487 R2