Professional Documents
Culture Documents
Data sheet
LINAK.COM/MEDLINE-CARELINE
LA27
Features: Usage:
• 24V DC permanent magnet motor • Duty cycle: 2/18; 2 minutes continuous use followed by
• Thrust up to 8000N (in a push application) 18 minutes not in use
• Thrust up to 4000N (in a pull application) • Duty cycle: Max 5% or 1 min. continuous use followed by
• Elegant and compact design with small installation dimensions 19 minutes not in use - with 8000N version.
• Protection class: IPX4, IPX6 • Lifetime limited to only 3000 cycles according to
• Colour: Dark grey (RAL 7016) or light grey (RAL 7035) EN1970 - with 8000N version
• Built-in end stop switches (not adjustable) • Ambient temperature: +5o to +40oC
• Possible to mount on control box CB6 with a special (the actuator must also be at this temp.)
mounting clip (article no. 009271002 is delivered with CB6) • LA27 is approved according to the 3rd edition of IEC 60601-1,
• Scratch and wear resistent powder painted steel inner tube. ANSI/AAMI ES 60601-1 and CAN/CSA C-22.2 No. 60601-1
• Brake ensures the self-locking ability in either push or pull
directions.There will always be a reduction of the self-lock
characteristic when the actuator is run in the opposite
direction to the brake direction
• Thrust up to 3500N in push with Quick Release
• LA27 with Quick Release can have ratchet spline it can only
pull with max. 100N (anti-squeeze).
• LA27 with QR can be combined with std. spline function,
it can only push.
• Compatible with CB9C (only with the versions AC, AD, AE or
AH), CB6, CB6S OBL/OBF, CB6S OBMe, CB16 OBL/OBF, CB20)
• Noise level 50dB (A), actuator not loaded
LINAK.COM/MEDLINE-CARELINE
Technical specifications
Combi code Generel Max load Typical amp. Speed Selflocking Type selection
Short-circuit ON
Option position
Average speed,
Max current at
current at max
Piston rod eye
Stroke Length
Actuator type
Safety option
speed at max
MAX STROKE
MIN STROKE
Spindle type
Motor PCBA
Back fixture
Motor type
Minimum
IP Degree
max load
max load
Average
Colour
8000N
PITCH
Brake
PUSH
PULL
load
load
Std.
QR
27 X X X X Z X X BBB Z Z Z
27 1 F M 0B Z 4 1 BBB Z Z Z 3 200 50 8000 2000 5,7 4,9 2,7 3,8 8000 push, 4000 pull X
0 2000
1
0 2000 2000 X
2 -
3
27 2 S Z 0B Z 0 BBB Z Z Z 5 300 50 3.8 3.3 4,5 5,5
1
1 3500 -
2 3500* X
3
0 2 - 3500
0
CE
1
27 2 F M Z 1 BBB Z Z Z 5 250 50 3500 - 3.5 3.1 4,5 5,5 3500* X
CE 2
F 3
0 750
1
0 750
-
750 X
2
3
27 3 S Z 0B Z 0 BBB Z Z Z 9 405 50 3,5 2,7 10 11
1
1 1500 -
2 1500* X
3
0 2 - 1500
0 3000
1
0 3000
-
3000 X
2
3
250
0
6000 6000*
1
1 - X
2
27 4 S Z 0B Z BBB Z Z Z 4 50 5 4,6 3 3,4
3
0
251 4000 4000
1
1 - - X
2
300
3
0
2 250 - 4000 4000 X
1
0 1000
1
0 1000
-
1000 X
2
3
27 7 S Z 0B Z 0 BBB Z Z Z 6 300 50 3,5 2,9 5 6,8
1
1 2500 -
2 2500* X
3
0 2 - 2500
0
CE
1
27 7 F M Z 1 BBB Z Z Z 6 250 50 2500 - 3,5 2,9 5 6,8 2500* X
CE 2
F 3
S + 170 mm S + 170 mm
The maximum allowed Built-in Dimension may not exceed the standard BID by more than 100 mm. Contact LINAK A/S if more than
100 mm is wanted.
If mechanical spline and eye options 1, 3 or 4 are chosen, then the Built-in Dimension is increased by 10 mm.
2 7 0 40 100 0 0 03 B 4 - 2 1 2 0 1 027 0 1 D 0 0 0 0
Description
Interface: 01 = Analog *
02 = OpenBus
XX = Special
Positionering: 0 = None
H = Hall
X = Special
Safety : 0 = None
A = Safety nut
C = Mec.Spline
D = Mec.Spline+Safety nut.
J = Ratchet Spline
K = Ratchet Spline + Safety nut
X = Special
Stroke Length: XXX = mm.
Spindle Pitch: 030 = 3 mm
040 = 4 mm
050 = 5 mm
060 = 6 mm
090 = 9 mm
Actuator Type: 27 = LA27
It is possible to order LA27 with individual stroke lengths (in steps of 5 mm) and installation dimensions. This requires a minimum quantity of
200 pcs per order.
Dimensions LA27
Drawing no.:LA27001B
26
15
10.3
60.2
38.7
28
35.7
19.1
18 15
125.5
12.5
92.4
128.6
18.9
1.8
29.5
25
5.3
Detail A Detail A
Drawing no.:277131-k1500041
93.8
35.2
25
28
38
26
34.7
125.5
15
19.1
12.5
92.4
128.6
10.3 7.5
29
29.5
Cable
1.5
10.3±0.1
Drawing no. 0279020-10
Back fixtures:
SECTION A-A
Terms of use
The user is responsible for determining the suitability of LINAK products for specific application. LINAK takes great care in providing
accurate and up-to-date information on its products.
However, due to continuous development in order to improve its products, LINAK products are subject to frequent modifications and
changes without prior notice. Therefore, LINAK cannot guarantee the correct and actual status of said information on its products.
While LINAK uses its best efforts to fulfil orders, LINAK cannot, for the same reasons as mentioned above, guarantee the availability
of any particular product. Therefore, LINAK reserves the right to discontinue the sale of any product displayed on its website or listed
in its catalogues or other written material drawn up by LINAK.
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof, please contact LINAK.
FOR MOUNTING INSTRUCTIONS AND GUIDANCE IN USAGE, PLEASE SEE THE RELEVANT USER’S MANUALS