For tilting of burners, turnbuckles have been provided in all
comers in place of power cylinders/chain blocks.
To tilt burner nozzles up turnbuckle nut assembly has to be rotated
in clockwise direction and to tilt nozzles down turnbuckle has to be rotated in anticlockwise direction.
Directions of rotation are specified as viewing from top.
Nozzles of each corner may be tilted independently by rotating the
nut assembly not more than a turn at a time. Nozzles of all corners to be tilted equally within 2o position. i.e. all four turnbuckles to be rotated one by one equally and not exceeding one full turn at a time.
For tilting nozzles by 7o, each turnbuckle has to be rotated by
approximately 3.5 rotations.
After completion of tilting to the required position, tilting lever to