Professional Documents
Culture Documents
Decuments
API 650 ,11TH.ED
M09
1 EVALUATION OF MATERIAL API650 -5.6.2 Tabel5-2a
2 EVALUATION OF SHELL THK. API650 -Clause 5.6.3.2
3 EVALUATION OFBOTTOM PLATE API650 -Clause 5.5
4 EVALUATION OFBOTTOM SKETCAPI650 - Clause 5.4
5 EVALUATION OF ROOF THICKNEAPI650- Clause5.10.4 & 5.10.5
6 STABILITY CHECK AGAINST WIN API650 - Clause 5.9.7.1
7 SHELL TRANSFORMER API650- Clause 5.9.7.2
8 WIND GIRDER STIFFENING API650- Clause5.9.5
9 OVERTURNING MOMENT AGAINSAPI650-Clause 5.11.1
WIND LOAD
10 UNANCHORED TANKS STABILITYAPI 650 -5.11.2
11 STABILITY CHECK SEISMIC API650-APPENDIX E
12 VENT SIZE CALC. API650-Clause -API2000
13 REINF. AROUND OPENING API650-Clause5.7
11 HEATING COIL Reff. Pressure Vessel Manual,procedure 6-8 & ASME
1.0
Stem in
Condensate
Steam Coil Data
1.1 Operating Pressure 4 ata
1.2 Pressure at inlet of Coil heater 4 ata
1.3 Steam temp.at design pressure of coil 168 0
C
d b
twdt
a e
h hg tm
g ta
AISI 'Steel Plate Engr Data' Dec. 92, Vol. 2, Part VII
stresses at the Top Plate including axial stress due to chair height as per AISI
Top Plate stress =P*e/ tm 2 *K
where K= 1.32 * Z / [(1.43*a*h2 / R*tm ) +(4*a*h2)0.333] + 0.031/(R*tm)0.5
Z = 1/ [ 0.1777*a*ta / (R*tm )0.5 + (ta /tm )2 +1]
Z = #REF!
K = #REF!
Top Plate stress σ th = #REF! kpa ###