Professional Documents
Culture Documents
2 015 P R O D U C T S C A T A L O G
Table of Contents
Gates Corporation
1551 Wewatta Street Copyright 2015
Denver, Colorado 80202-6173 Printed in U.S. of America
PAGE 1
Oilfield Applications
Drilling Mast 1
Mast Base 2
B.O.P. 3
Pipe Handler 4
Pipe Rack 5
Draw Works 6
Mud Pumps 7
Service Crane 10
Water Tank 11
Gates solutions can be
Power Unit 12 found on virtually every
Accumulators 13
part of a drilling rig.
Fuel Tank 14
Degasser 15
Choke Manifold 16 1
Top Drive 17
Drill Floor 18 17
16
Emergency Generator 19
5
18
6
4
10
12
15
3
11
2
9
8
7
13
19
14
PAGE 2
Well Completion Applications
FRAC FLEET
Hydraulic fracturing fleets can consist of a variety of oilfield service trucks that feature
applications in which Gates can be a solutions provider.
6
1
1 PUMP TRUCKS
2 MISSILE
3 BLENDER TRUCKS
5 HYDRATION UNIT
6 WELLHEAD
PAGE 3
Additions & Modifications
PRODUCT DESCRIPTION
Gates is excited to announce the revolutionary Efficiency
Engineered program with a new naming system for industrial
hose. All of the products in this catalog will start using the new
All Gates Industrial Hoses
descriptive and intuitive names. But don't worry, the previous
names will be included on all catalog pages and product labels
for reference during the transition.
Black Gold Xtreme Choke & Kill 10,000 New API 16C choke and kill hose.
lexible Choke and Kill hose used on a Blow Out Preventer (BOP)
F
Black Gold Choke & Kill 5000/10000 MegaShield system to control well pressure during the drilling process
Alternative to stainless steel armor.
Black Gold 5000 Megashield New API 16D fire resistant BOP hose.
Black Gold Oilfield Frac 400D New oilfield frac hose with abrasion resistant cover.
Black Gold Leg Jetting 1250 New leg jetting hose for jack-up rigs.
Black Gold PowerSpiral 5000 New extremely flexible API 7K hose for drilling applications.
PAGE 4
Engineering & Services
Gates E&S - North America Gates E&S - Middle East Gates E&S - Dalian
134 44th Street Jebel Ali Free Zone Jingang Industrial Park
Corpus Christi, Texas 78405 P. O. Box 61046 2#-A in Phase I,
gates.com/es Dubai, United Arab Emirates 99 Mid-Huaihe Road, Postal Code
Ph. 361.885.3551 gates.com/es 116600
F. 361.887.0812 Ph. 971 4 886 1414 Dalian Economic & Tech. Dev. Zone
Shawn Dugan F. 971 4 886 1413 Dalian, Liaoning Province, China
shawn.dugan@gates.com Joe MacGillicuddy, Bus. Dev. Manager Ph. +86 411 8740 7899
joe.macg@gates.com F. +86 411 8740 7866
Gates de Mexico, S.A. de C.V. James Xu
Lerma Hose Plant Gates InterAmerica james.xu@gates.com
Blvd. Aeropuerto Miguel Aleman No. 164 15751 S.W. 41st Street, Suite 100
52000 Lerma Davie, FL 33331 Gates E&S - Australia
Edo. De Mexico, Mexico gates.com 101 Sheffield Road
gates.com.mx Ph 954.306.4360 Welshpool, WA, 6106
Ph. 52 (55) 2000 2712 F. 954.385.9991 Australia
F. 52 (55) 8850 2801 Jorge Hernandez Ph: (61) 8 9258 8399
Victor Mendoza jhernandez@gates.com F: (61) 8 9258 8099
victor.mendoza@gates.com Mr Paul McKerlie, Branch Manager
Gates do Brasil Paul.Mckerlie@gates.com
Gates Engineering & Services Pte Ltd Rua Florida, 1703 – 11o Andar
40, Gul Circle São Paulo SP – 04530-001 Gates E&S - Mexico
Jurong Industrial Estate gatesbrasil.com.br Calle Circuito Tabasco Sur Mza. 2
Singapore 629575 Ph. 11-5105.8136 Lotes 4,5,6,
Ph. (65) 68617322 Sidney Aguilar Módulo 4 Parque Tabasco Business
F. (65) 68617631 sidney.aguilar@gates.com Center Carretera Reforma-Dos bocas
TC Ang, General Manager Km. 17+920 R/a Pechucalco 2ª. Sección,
tc0543@gates.com Cuanduacán, Tabasco. C.P 86690
Ph: +52. 914.104.10.35
Leonel Magaña
lm5052@gates.com
POTENTIAL CONSEQUENCES
OF HOSE FAILURES
Beyond disastrous results, failure
of a choke & kill hose causes:
Downtime Endangerment Environmental Equipment
and loss of of workers spills and replacement
production clean-up costs costs
PAGE 5
Safe Hydraulics
Preventive maintenance is especially important with hydraulic products. The high pressures
and temperatures associated with hydraulics make hose and fitting maintenance, as well
as selection, critical. If done correctly, the risk of injury and/or excessive, costly downtime
decreases significantly. In addition, there is a growing awareness regarding costs associated
with cleaning up a hydraulic spill (EPA). Combining top-quality Gates products with a regular
preventive maintenance program will keep your equipment operating at maximum efficiency.
BENEFITS
1. Safety hazards are minimized.
2. Efficient production because equipment is in good operating condition at all times.
3. Better use of in-shop maintenance personnel since there’s less emergency work and
more scheduled work.
4. Improved control of spare parts inventory, and reduced parts usage.
5. Reduction of equipment downtime through scheduled inspections.
6. Increased life expectancy of equipment.
7. Fewer capital outlays for purchasing new equipment prematurely.
8. Reduced repair costs due to fewer breakdowns.
9. Prevention of equipment deterioration from causes other than obsolescence.
PAGE 6
Safety Connections
PAGE 7
Certifications and Standards
PAGE 8
MTR Data Book
GMCO FITTINGS
GEORGE MYER COMPANY
UNION
WELDING
SPECIFICATION
XYZ Inspections
1234 Main Street
Houston, TX 77041
Couplings (Fittings)
Unions
Welding Specifications
NDE RESULTS
NON-DESTRUCTIVE EXAMINATION
TEST CHART
TEST
ULTRA SONIC TESTING or X-RAY
CERTIFICATE
IMAGES
PACKING LIST
NAFTA
Images
Packing List NAFTA Certificate of Origin
PAGE 9
Efficiency. Engineered
We’re also standardizing the way we describe our hoses: Standard, Plus and XTreme™. These three levels
represent increasing degrees of performance, such as resistance to oil, abrasion or chemicals.
PAGE 10
Black Gold Products
RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between
pump and standpipe for pumping mud at extra high pressure in oil drilling
and exploration work. Meets the severe demands of today’s drilling methods
including directional drilling, pressure pulses and elevated temperatures. The
3/16” thick tube is designed to handle abrasive, corrosive and oil based drilling
muds. The UltraBrasion cover is designed to handle external damage from
abrasion, corrosion, gouges, oil and weather.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +180°F (-20°C to +82°C) continuous service (2 ½” ID through 4” ID)
CONSTRUCTION: Tube: Type C3 (Modified Nitrile). Black.
Reinforcement: Multiple layers of textile fabric and steel cable.
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 7,500 Working Pressure, 15,000 Test Pressure, 18,750 Burst
Pressure
COUPLINGS: Swaged couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K, ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 11
Black Gold Products
Rotary Vibrator 7500 Grade E BLACK GOLDTM ROTARY VIBRATOR 7500 GRADE E LOW-TEMP 5” (127mm) 7500PSI API SPEC7K
Low Temp
RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between pump
and standpipe for pumping mud at extra high pressure in low temperature
oil drilling and exploration work. Meets the severe demands of today’s
drilling methods including directional drilling, pressure pulses and elevated
temperatures. The 3/16” thick tube is designed to handle abrasive, corrosive
and oil based drilling muds. The UltraBrasion cover is designed to handle
external damage from abrasion, corrosion, gouges, oil and weather.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -20°F to +180°F (-29°C to +82°C) continuous service (2 ½” ID through 4” ID)
CONSTRUCTION: Tube: Type C3 (Modified Nitrile). Black.
Reinforcement: Multiple layers of textile fabric and steel cable.
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 7,500 Working Pressure, 15,000 Test Pressure, 18,750 Burst
Pressure
COUPLINGS: Swaged couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K, ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 12
Black Gold Products
RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between
pump and standpipe for pumping mud at extra high pressure in oil drilling
and exploration work. Meets the severe demands of today’s drilling methods
including directional drilling, pressure pulses and elevated temperatures. The
tube is designed to handle abrasive, corrosive and oil based drilling muds.
The UltraBrasion cover is designed to handle external damage from abrasion,
corrosion, gouges, oil and weather.
CAUTION: Hoses are manufactured to handle up to 20% hydrogen sulfide (H2S) for 1 hour
at 200°F (93°C) at rated working pressure. Gates recommends factory welded
couplings. Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +200°F (-20°C to +93°C) continuous service.
CONSTRUCTION: Tube: Type V (Fluoroelastomer). Black.
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 7,500 Working Pressure, 15,000 Test Pressure, 18,750 Burst
Pressure
COUPLINGS: Swaged couplings. Meets NACE MR0175. Contact Gates E&S or a Gates Black
Gold® distributor for a full range of fitting options such as hammer unions,
flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance, 3rd party witness tests and NACE
certificates are available for an additional fee.
STANDARDS: NACE MR0175. Made in the U.S.A.
PAGE 13
Black Gold Products
RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between
pump and standpipe for pumping mud at extra high pressure in oil drilling
and exploration work. Meets the severe demands of today’s drilling methods
including directional drilling, pressure pulses and elevated temperatures. The
3/16” thick tube is designed to handle abrasive, corrosive and oil based drilling
muds. The UltraBrasion cover is designed to handle external damage from
abrasion, corrosion, gouges, oil and weather.
TEMPERATURE: -4°F to +180°F (-20°C to +82°C) continuous service. For 2 1/2” - 4” I.D.
-4°F to +212°F (-20°C to +100°C) continuous service. For 5” I.D.
PAGE 14
Black Gold Products
Rotary Vibrator 5000 Grade D BLACK GOLDTM ROTARY VIBRATOR 5000 GRADE D LOW-TEMP 5” (127mm) 5000PSI API SPEC7K
Low Temp
RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between
pump and standpipe for pumping mud at extra high pressure in low pressure
oil drilling and exploration work. Meets the severe demands of today’s
drilling methods including directional drilling, pressure pulses and elevated
temperatures. The 3/16” thick tube is designed to handle abrasive, corrosive
and oil based drilling muds. The UltraBrasion cover is designed to handle
external damage from abrasion, corrosion, gouges, oil and weather.
TEMPERATURE: -20°F to +180°F (-29°C to +82°C) continuous service.
CONSTRUCTION: Tube: Type C3 (Modified Nitrile). Black.
Reinforcement: Multiple layers of textile fabric and steel cable.
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 5,000 Working Pressure, 10,000 Test Pressure, 12,500 Burst
Pressure
COUPLINGS: Swaged couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K. ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 15
Black Gold Products
RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between
pump and standpipe for pumping mud at extra high pressure in oil drilling
and exploration work. Meets the severe demands of today’s drilling methods
including directional drilling, pressure pulses and elevated temperatures. The
tube is designed to handle abrasive, corrosive and oil based drilling muds.
The UltraBrasion cover is designed to handle external damage from abrasion,
corrosion, gouges, oil and weather.
CAUTION: Hoses are manufactured to handle up to 20% hydrogen sulfide (H2S) for 1 hour
at 200°F (93°C) at rated working pressure. Field welding of couplings is not
recommended.
TEMPERATURE: -4°F to +200°F (-20°C to +93°C) continuous service.
CONSTRUCTION: Tube:Type V (Fluoroelastomer). Black.
Reinforcement: Multiple layers of textile fabric and steel cable
Cover:Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 5,000 Working Pressure, 10,000 Test Pressure, 12,500 Burst
Pressure
COUPLINGS: Swaged couplings. Meets NACE MR0175. Contact Gates E&S or a Gates Black
Gold® distributor for a full range of fitting options such as hammer unions,
flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance, 3rd party witness tests and NACE
certificates are available for an additional fee.
STANDARDS: NACE MR0175. Made in the U.S.A.
PAGE 16
Black Gold Products
Rotary Vibrator 5000 PowerSpiral™ BLACK GOLD ROTARY VIBRATOR 5000 POWERSPIRAL
TM
4” (102mm) 5000PSI
RECOMMENDED FOR: Flexible connection between standpipe and top drive/swivel or between
pump and standpipe for pumping mud at extra high pressure in oil drilling
and exploration work. Meets the severe demands of today’s drilling methods
including directional drilling, pressure pulses and elevated temperatures.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +250°F (-20°C to +121°C) continuous service.
CONSTRUCTION: Tube: Type C2 (Modified Nitrile). Black.
Reinforcement: High tensile steel wire.
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 2.5:1
COUPLINGS: Crimped GSM. Contact Gates E&S or a Gates Black Gold® distributor for a full
range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K. ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 17
Black Gold Products
Slim Hole Rotary BLACK GOLDTM SLIM HOLE ROTARY 1500 4” (102mm) 1500PSI (103Bar) C A
RECOMMENDED FOR: Rotary applications on workover rigs and slim hole or seismograph rigs
designed to operate at a maximum of 1,500 to 5,000 PSI rated working
pressure depending on size. Applications on small or medium-size drilling
rigs used for water well operations, water well core drill, blast or shot hole
operations. Hoses are flexible connectors in pressure lines used in conveying
mud or air. For normal air or mud applications and where increased resistance
to external abuse or pump pulsations is required.
TEMPERATURE: -40°F to +180°F (-40°C to +82°C) continuous service.
CONSTRUCTION: Tube: Type C (Nitile). Black.
Reinforcement: High tensile steel wire.
Cover: Type A (Chloroprene). Black. All sizes are perforated.
Design Factor: 2.5:1
COUPLINGS: 1 1/4” I.D. 5,000 psi. Gates 20GS-20MPAPI (7347-7695)
1” I.D. 5,000 psi. Gates 16GS-16MPLH (7347-7654)
2 1/2”, 3” and 4” - Swaged-On Permanent Couplings - API threads on
connecting end of stem for easy flange attachment. Strong collar to anchor
ferrule to stem. Electroplated steel. Also available in stainless steel and other
special metals. Wildman Type Q reusable couplings.
4” - Use George Myer Stem and Ferrule
71 Permanent (Mulconroy - API threads only) or reusable male couplings
(Wildman - API threads only). 77 GSM with Integral 2” Fig. 1502 Hammer Unions
or 80 Gates GSP (1 1/2” or 2” only). Reference the Hose Coupling Section.
For GS couplings reference Gates Hydraulic Hose catalog #35093.
Sources: Dixon Valve and Coupling Co., George Myer Co, Inc.
STANDARDS: ARPM (Class A) High Oil Resistant Tube and MSHA 2G-IC-11C Flame Resistant
Cover. Made in the U.S.A.
PAGE 18
Black Gold Products
Cementing 15000
BLACK GOLDTM CEMENTING 15000 3” (76.2mm) 15000 PSI
RECOMMENDED FOR: Used as a flexible connection between the cementing pump manifold and
cementing head for conveyance of cement slurries at high pressure. The tube is
designed to handle abrasive and corrosive cements. The UltraBrasion cover is
designed to handle external damage from abrasion, corrosion, gouges, oil and
weather.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +212°F (-20°C to +100°C) continuous service.
Tube: Type V (Fluoroelastomer). Black.
CONSTRUCTION:
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 15,000 Working Pressure, 22,500 Test Pressure, 30,000 Burst
Pressure
COUPLINGS: Built-in couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
PAGE 19
Black Gold Products
RECOMMENDED FOR: Used as a flexible connection between the cementing pump manifold and
cementing head for conveyance of cement slurries at high pressure. The tube is
designed to handle abrasive and corrosive cements. The UltraBrasion cover is
designed to handle external damage from abrasion, corrosion, gouges, oil and
weather.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +212 (-20°C to +100°C) continuous service.
Tube: Type C3 (Modified Nitrile). Black.
CONSTRUCTION:
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 15,000 Working Pressure, 22,500 Test Pressure, 33,750 Burst
Pressure
COUPLINGS: Swaged couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K. ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 20
Black Gold Products
Cementing 10000
BLACK GOLD CEMENTING 10000 4” (102mm) 10000PSI
RECOMMENDED FOR: Used as a flexible connection between the cementing pump manifold and
cementing head for conveyance of cement slurries at high pressure. The
3/16” thick tube is designed to handle abrasive and corrosive cements. The
UltraBrasion cover is designed to handle external damage from abrasion,
corrosion, gouges, oil and weather.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +180°F (-20°C to +82°C) continuous service.
CONSTRUCTION: Tube: Type C3 (Modified Nitrile). Black.
Reinforcement: Multiple layers of textile fabric and steel cable.
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 10,000 Working Pressure, 15,000 Test Pressure, 22,500 Burst
Pressure
COUPLINGS: Swaged couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K. ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 21
Black Gold Products
RECOMMENDED FOR: Used as a flexible connection between the cementing pump manifold and
cementing head for conveyance of cement slurries at high pressure. The tube
is designed to handle abrasive and corrosive cements. The MegaTuff® cover is
designed to handle severe external damage from abrasion, corrosion, gouges,
oil and weather.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +250°F (-20°C to +121°C) continuous service.
Tube: Type C (Nitrile). Black.
CONSTRUCTION:
Reinforcement: Multiple layers of spiraled high tensile steel wire.
Cover: Type L (MegaTuff®). Black.
Design Factor: 10,000 Working Pressure, 15,000 Test Pressure, 22,500 Burst
Pressure
COUPLINGS: Crimped couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty corrugated box.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K. ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 22
Black Gold Products
Cementing 5000
RECOMMENDED FOR: Used as a flexible connection between the cementing pump manifold and
cementing head for conveyance of cement slurries at high pressure. The
3/16” thick tube is designed to handle abrasive and corrosive cements. The
UltraBrasion cover is designed to handle external damage from abrasion,
corrosion, gouges, oil and weather.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +180°F (-20°C to +82°C) continuous service.
Tube: Type C3 (Modified Nitrile). Black.
CONSTRUCTION:
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 5,000 Working Pressure, 10,000 Test Pressure, 12,500 Burst
Pressure
COUPLINGS: Swaged couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K. ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 23
Black Gold Products
RECOMMENDED FOR: Used as a flexible connection between the cementing pump manifold and
cementing head for conveyance of cement slurries at high pressure. The tube
is designed to handle abrasive and corrosive cements. The cover is designed to
handle external damage from abrasion, corrosion, gouges, oil and weather.
CAUTION: Field welding of couplings is not recommended.
TEMPERATURE: -4°F to +250°F (-20°C to +121°C) continuous service.
Tube: Type C (Nitrile). Black.
CONSTRUCTION:
Reinforcement: Multiple layers of spiraled high tensile steel wire.
Cover: Type A (Chloroprene). Black
Design Factor: 5,000 Working Pressure, 10,000 Test Pressure, 12,500 Burst
Pressure
COUPLINGS: Crimped couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty corrugated box
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance and 3rd party witness tests are
available for an additional fee.
STANDARDS: API (American Petroleum Institute) Spec 7K. ISO 14693. ABS and DNV type
approvals. Made in the U.S.A.
PAGE 24
Black Gold Products
RECOMMENDED FOR: Flexible hose between the riser and manifold or around the ball joint of offshore
drilling rigs. Specially designed to withstand flexing and high pressures
encountered in offshore applications.
CAUTION: Hoses are manufactured to handle up to 20% hydrogen sulfide (H2S) for 1 hour
at 200°F (93°C) at rated working pressure. Field welding of couplings is not
recommended.
TEMPERATURE: -4°F to +200°F (-20°C to +93°C) continuous service.
Tube: Type V (Fluoroelastomer). Black.
CONSTRUCTION:
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 15,000 Working Pressure, 22,500 Test Pressure, 33,750 Burst
Pressure
COUPLINGS: Built-in couplings. Meets NACE MR0175. Contact Gates E&S or a Gates Black
Gold® distributor for a full range of fitting options such as hammer unions,
flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance, 3rd party witness tests and NACE
certificates are available for an additional fee.
STANDARDS: NACE MR0175. Made in the U.S.A.
PAGE 25
Black Gold Products
RECOMMENDED FOR: Flexible Choke and Kill lines that require API 16C certification. The tube is
specially compounded to resist abrasion, corrosion, oil, drilling muds, methane
and H2S. The UltraBrasionTM cover is compounded to protect against abrasion,
corrosion, cutting, gouging, oil and weather.
CAUTION: Survival temperature is 350°F (177°C) for 1 hour per API 16C 10.5.2. Field
welding of couplings is not recommended.
TEMPERATURE: -4°F to +212°F (-20°C to +100°C) continuous service.
Tube: Synthetic Polymer. Black.
CONSTRUCTION:
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 10,000 Working Pressure, 15,000 Test Pressure, 22,500 Burst
Pressure
COUPLINGS: Crimped couplings. Meets NACE MR0175/ISO 15156. Contact Gates E&S or a
Gates Black Gold® distributor for a full range of fitting options such as flanges
and hubs.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance, 3rd party witness tests and NACE
certificates are available for an additional fee.
STANDARDS: API 16C FSL 3 and NACE MR0175/ISO 15156. ABS and DNV type approvals .
Made in the U.S.A.
PAGE 26
Black Gold Products
RECOMMENDED FOR: Flexible Choke and Kill lines used on a Blow Out Preventer (BOP) system to
control well pressure during the drilling process. Hoses are manufactured to
handle up to 20% hydrogen sulfide (H2S) for 1 hour at 200oF (93oC) at rated
working pressure. Field welding of couplings is not recommended. Alternative
to stainless steel armor.
TEMPERATURE: -20°F to +200°F (-30°C to +93°C) continuous service
Tube:
CONSTRUCTION: Type V (Flouroelastomer) Black
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Red with black stripe
Design Factor: 10,000 Working Pressure, 15,000 Test Pressure, 22,500 Burst
Pressure
COUPLINGS: Swaged couplings. Meets NACE MR0175/ISO 15156. Contact Gates E&S or a
Gates Black Gold® distributor for a full range of fitting options such as flanges
and hubs.
PACKAGING: Finished assemblies packaged in a heavy-duty corrugated box or wooden crate.
STANDARDS: Meets Lloyds Fire Test 1000/499 (22 mins).
PAGE 27
Black Gold Products
RECOMMENDED FOR: Flexible hose between the riser and manifold or around the ball joint of offshore
drilling rigs. Specially designed to withstand flexing and high pressures
encountered in offshore applications.
CAUTION: Hoses are manufactured to handle up to 20% hydrogen sulfide (H2S) for 1 hour
at 200°F (93°C) at rated working pressure. Field welding of couplings is not
recommended.
TEMPERATURE: -4°F to +200°F (-20°C to +93°C) continuous service.
CONSTRUCTION: Tube: Type V (Fluoroelastomer). Black.
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 10,000 Working Pressure, 15,000 Test Pressure, 22,500 Burst
Pressure
COUPLINGS: Swaged couplings. Meets NACE MR0175. Contact Gates E&S or a Gates Black
Gold® distributor for a full range of fitting options such as hammer unions,
flanges, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance, 3rd party witness tests and NACE
certificates are available for an additional fee.
STANDARDS: NACE MR0175. Lloyds Fire Test 0D/1000/499. Made in the U.S.A.
PAGE 28
Black Gold Products
RECOMMENDED FOR: Flexible Choke and Kill lines that require API 16C certification. The tube is
specially compounded to resist abrasion, corrosion, oil, drilling muds, methane
and H2S. The UltraBrasionTM cover is compounded to protect against abrasion,
corrosion, cutting, gouging, oil and weather.
CAUTION: Survival temperature is 350°F (177°C) for 1 hour per API 16C 10.5.2. Field
welding of couplings is not recommended.
TEMPERATURE: -4°F to +212°F (-20°C to +100°C) continuous service.
Tube: Synthetic Polymer. Black.
CONSTRUCTION:
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 5,000 Working Pressure, 7,500 Test Pressure, 15,000 Burst
Pressure
COUPLINGS: Crimped couplings. Meets NACE MR0175/ISO 15156. Contact Gates E&S or a
Gates Black Gold® distributor for a full range of fitting options such as flanges
and hubs.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance, 3rd party witness tests and NACE
certificates are available for an additional fee.
STANDARDS: API 16C FSL 3 and NACE MR0175/ISO 15156. ABS and DNV type approvals.
Made in the U.S.A.
PAGE 29
Black Gold Products
RECOMMENDED FOR: Flexible Choke and Kill lines used on a Blow Out Preventer (BOP) system to
control well pressure during the drilling process. Hoses are manufactured to
handle up to 20% hydrogen sulfide (H2S) for 1 hour at 200oF (93oC) at rated
working pressure. Field welding of couplings is not recommended. Alternative
to stainless steel armor.
TEMPERATURE: -20°F to +200°F (-30°C to +93°C) continuous service
Tube:
CONSTRUCTION: Type V (Flouroelastomer) Black
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Red with black stripe
Design Factor: 10,000 Working Pressure, 15,000 Test Pressure, 22,500 Burst
Pressure
COUPLINGS: Swaged couplings. Meets NACE MR0175/ISO 15156. Contact Gates E&S or a
Gates Black Gold® distributor for a full range of fitting options such as flanges
and hubs.
PACKAGING: Finished assemblies packaged in a heavy-duty corrugated box or wooden crate.
STANDARDS: Meets Lloyds Fire Test 1000/499 (30 mins).
PAGE 30
Black Gold Products
RECOMMENDED FOR: Flexible hose between the riser and manifold or around the ball joint of offshore
drilling rigs. Specially designed to withstand flexing and high pressures
encountered in offshore applications.
CAUTION: Hoses are manufactured to handle up to 20% hydrogen sulfide (H2S) for 1 hour
at 200°F (93°C) at rated working pressure. Field welding of couplings is not
recommended.
TEMPERATURE: -4°F to +200°F (-20°C to +93°C) continuous service.
Tube: Type V (Fluoroelastomer). Black.
CONSTRUCTION:
Reinforcement: Multiple layers of textile fabric and steel cable
Cover: Type C4 (Modified Nitrile). Black with gold stripe.
Design Factor: 5,000 Working Pressure, 10,000 Test Pressure, 15,000 Burst
Pressure
COUPLINGS: Swaged couplings. Meets NACE MR0175. Contact Gates E&S or a Gates Black
Gold® distributor for a full range of fitting options such as hammer unions,
flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
OPTIONS: Accessories such as safety clamps, hose lift eyes and stainless steel armor are
available upon request. Test certificates are shipped with every order. Coupling
material traceability, letters of conformance, 3rd party witness tests and NACE
certificates are available for an additional fee.
STANDARDS: NACE MR0175. Made in the U.S.A.
PAGE 31
Black Gold Products
RECOMMENDED FOR: Blow-out preventer (BOP) systems requiring high pressure, high temperature
and flame resistant control lines certified to API 16D and Lloyds 1000/499 fire
test for five minutes at 1300°F (700°C.)
CAUTION: All BOP assemblies must be manufactured according to Gates GTS specification
GTS-04-029 to meet API 16D and Lloyds 1000/499 fire test requirements by
Gates E&S or a qualified Gates Black Gold® distributor.
TEMPERATURE: -40°F to +212°F (-40°C to +100°C) continuous service.
Tube: Type C (Nitrile). Black.
CONSTRUCTION:
Reinforcement: Multiple layers of high tensile steel wire.
Cover: Type A3 (Modified Chloroprene). Red with black stripe.
Design Factor: 4:1
COUPLINGS: Crimped couplings with over-ferrule fire protection. Contact Gates E&S or
a Gates Black Gold® distributor for a full range of coupling and over-ferrule
options.
PACKAGING: Finished assemblies packaged in a heavy-duty corrugated box or wooden crate.
OPTIONS: Test certificates are shipped with every order. Lloyds certificates are available
upon request. Accessories such as API 16D quick disconnects and exterior
armor to protect hoses against extreme environmental damage are available
upon request.
STANDARDS: API (American Petroleum Institute) 16D and Lloyds 1000/499 fire test.
Hydrostatic pressure tests per EUB (Alberta Energy and Utilities Board).
PAGE 32
Hydraulic Products
PowerSpiral™ 5000
RECOMMENDED FOR: Flexible hydraulic connections between the Hydraulic Power Unit (HPU) and
critical drilling equipment such as top drives, iron roughnecks and pipe handlers
that demand extreme performance and durability.
DESIGN FACTOR: 4:1
TEMPERATURE: 40°F to +212°F (-40°C to +100°C)
COUPLINGS: (See gates.com/ecrimp or Crimp Data Manual 35019)
MegaCrimp® Couplings (Section G)
STANDARDS: Meets or exceeds pressure performance requirements of SAE 100R13,
flame resistance acceptance designation “MSHA 2G” and ABS. DNV pending
approval.
PAGE 33
Hydraulic Products
PowerSpiral™ 3000
RECOMMENDED FOR: Flexible hydraulic connections between the Hydraulic Power Unit (HPU) and
critical drilling equipment such as top drives, iron roughnecks and pipe handlers
that demand extreme performance and durability.
DESIGN FACTOR: 4:1
TEMPERATURE: 40°F to +212°F (-40°C to +100°C)
COUPLINGS: (See gates.com/ecrimp or Crimp Data Manual 35019)
MegaCrimp® Couplings (Section G)
STANDARDS: Meets or exceeds pressure performance requirements of SAE 100R12,
flame resistance acceptance designation “MSHA 2G” and ABS. DNV pending
approval.
PAGE 34
Leg Jetting 1250
BLACK GOLD LEG JETTING 1250 4” (102mm) 1,250 PSI (86 BAR) C A
RECOMMENDED FOR: High pressure water systems used to break the suction between the jack-up
feet (spud cans) and ocean floor prior to lifting the legs.
TEMPERATURE: -4°F to +180°F (-20°C to +82°C)
Tube: Nitrile. Black.
CONSTRUCTION:
Reinforcement: High tensile steel wire.
Cover: Neoprene. Black with gold stripe.
Design Factor: 4:1
COUPLINGS: Swaged couplings. Contact Gates E&S or a Gates Black Gold® distributor for a
full range of fitting options such as hammer unions, flanges, hubs, etc.
PACKAGING: Each length packaged in a heavy-duty wooden crate.
PAGE 35
Hydraulic Products
PowerBraid™ (2 Wire)
RECOMMENDED FOR: Flexible hydraulic connections between the Hydraulic Power Unit (HPU) and
critical drilling equipment such as top drives, iron roughnecks and pipe handlers
that demand extreme performance and durability.
DESIGN FACTOR: 4:1
TEMPERATURE: 40°F to +212°F (-40°C to +100°C)
COUPLINGS: (See gates.com/ecrimp or Crimp Data Manual 35019)
MegaCrimp® Couplings (Section G)
STANDARDS: Meets or exceeds pressure performance requirements of 100R2, flame
resistance acceptance designation “MSHA 2G” and ABS. DNV pending
approval.
PAGE 36
Hydraulic Products
PowerBraid™ (1 Wire)
RECOMMENDED FOR: Flexible hydraulic connections between the Hydraulic Power Unit (HPU) and
critical drilling equipment such as top drives, iron roughnecks and pipe handlers
that demand extreme performance and durability.
DESIGN FACTOR: 4:1
TEMPERATURE: 40°F to +212°F (-40°C to +100°C)
COUPLINGS: (See gates.com/ecrimp or Crimp Data Manual 35019)
MegaCrimp® Couplings (Section G)
STANDARDS: Meets or exceeds pressure performance requirements of 100R1, flame
resistance acceptance designation “MSHA 2G” and ABS. DNV pending
approval.
PAGE 37
Hydraulic Products
Nom Nom Working Min. Min. Bend Standard Wt. Per Description Product
I.D. O.D. Pressure Suction Burst Radius Pack Ft. (hose) No.
(ln.) (ln.) (psi) (in Hg) (psi) (ln.) (Lbs.)
1/4 .59 3000 30 12000 2.0 400 .25 4MEGATECH 3000XREEL 4657-2373
1/4 .59 3000 30 12000 2.0 1 12.40 4MEGATECH3000 X50FT 4657-4116
3/8 .74 3000 30 12000 2.5 350 .31 6MEGATECH 3000XREEL 4657-2374
3/8 .74 3000 30 12000 2.5 1 16.40 6MEGATECH3000 X50FT 4657-4117
1/2 .86 3000 30 12000 3.5 350 .37 8MEGATECH 3000XREEL 4657-2319
1/2 .86 3000 30 12000 3.5 1 20.00 8MEGATECH3000 X50FT 4657-4118
RECOMMENDED FOR: For pressurized hot oil return lines and rotary oil lines. Meets the requirements
of SAE J1405 performance specifications for high-temperature transmission
and lubricating oil systems using petroleum base oils.
TEMPERATURE: Petroleum-base fluids: -40°F to +300°F (-40°C to +149°C). Phosphate esters
fluids as recommended by the fluid manufacturer, but within a range of -40°F to
+212°F (-40°C to +100°C). For water emulsions see Temperature Limits Table.
CONSTRUCTION: Tube: True-bore GTS (Gates Technical Spec.) black tube specifically
compounded for temperature and chemical resistance (CPE -
Type J).
Reinforcement: Two braids of high-tensile steel wire.
Cover: Oil and mildew resistant, textile braid, impregnated with
synthetic rubber.
COUPLINGS: (See gates.com/ecrimp or Crimp Data Manual 35019)
MegaCrimp® Couplings (Section G)
PAGE 38
Hydraulic Products
Nom Nom Working Min. Min. Bend Standard Wt. Per Description Product
I.D. O.D. Pressure Suction Burst Radius Pack Ft. (hose) No.
(ln.) (ln.) (psi) (in Hg) (psi) (ln.) (Lbs.)
¼ .52 1000 30 4000 2.0 350 .11 4MEGATECH 1000XREEL 4657-2332
1/4 .52 1000 30 4000 2.0 1 5.99 4MEGATECH1000 X50FT 4657-2503
3/8 .66 1000 30 4000 2.5 350 .20 6MEGATECH 1000XREEL 4657-2297
3/8 .66 1000 30 4000 2.5 1 9.75 6MEGATECH1000 X50FT 4657-2504
1/2 .80 1000 30 4000 3.5 350 .24 8MEGATECH 1000XREEL 4657-2334
1/2 .80 1000 30 4000 3.5 1 11.81 8MEGATECH1000 X50FT 4657-2505
5/8 .93 1000 30 4000 4.0 300 .33 10MEGATECH 1000XREEL 4657-2335
5/8 .93 1000 30 4000 4.0 1 15.06 10MEGATECH1000 X50FT 4657-2506
3/4 1.15 1000 30 4000 4.7 200 .40 12MEGATECH 1000XREEL 4657-2336
¾ 1.15 1000 30 4000 4.7 1 21.00 12MEGATECH1000 X50FT 4657-4040
1 1.37 1000 30 4000 6.0 150 .58 16MEGATECH 1000XREEL 4657-2337
1 1.37 1000 30 4000 6.0 1 25.80 16MEGATECH1000 X50FT 4657-4041
1 1/4 1.64 1000 30 4000 8.5 100 .83 20MEGATECH 1000XCTN 4657-2338
1 1/4 1.64 1000 30 4000 8.5 1 45.67 20MEGATECH1000 X50FT 4657-4042
Note: Federal law requires registration with the Department of Transportation for anyone producing air
brake hose assemblies with swaged or crimped fittings. See Engineering and Technical Data Section
for compliance.
RECOMMENDED FOR: Air brake, pressurized hot oil return lines and rotary oil/air compressor lines.
Meets the requirements of DOT FMVSS 106-74, SAE J1402, for Air Brake Hose
(-4, 6, 8, 10), and SAE J1405 performance specifications for high-temperature
transmission and lubricating oil systems using petroleum base oils. Not
recommended for gasoline or diesel fuel applications.
TEMPERATURE: Petroleum-base fluids: -40°F to +300°F (-40°C to +149°C). Phosphate esters
fluids as recommended by the fluid manufacturer, but within a range of -40°F to
+212°F (-40°C to +100°C). For water emulsions see Temperature Limits Table.
CONSTRUCTION: Tube: GTS (Gates Technical Spec.) black tube specifically
compounded for temperature and chemical resistance (CPE -
Type J). See Hose Stock Characteristics.
Reinforcement: One braid of high-tensile steel wire.
Cover: Oil and mildew resistant, textile braid, impregnated with
synthetic rubber.
COUPLINGS: (See gates.com/ecrimp or Crimp Data Manual 35019)
MegaCrimp® Couplings (Section G)
PAGE 39
Hydraulic Products
Nom Nom Working Min. Min. Bend Standard Wt. Per Description Product
I.D. O.D. Pressure Suction Burst Radius Pack Ft. (hose) No.
(ln.) (ln.) (psi) (in Hg) (psi) (ln.) (Lbs.)
3/4 1.22 350 25 1400 2.5 1 11.22 12GMV X25FT 4504-0961
3/4 1.22 350 25 1400 2.5 100 .45 12GMVXCTN 4504-0123
1 1.45 300 25 1200 3.0 1 13.52 16GMV X25FT 4504-0962
1 1.45 300 25 1200 3.0 100 .54 16GMVXCTN 4504-0003
1 1/4 1.76 250 25 1000 4.0 1 19.17 20GMV X25FT 4504-0963
1 1/4 1.76 250 25 1000 4.0 100 .77 20GMVXCTN 4504-0004
1 1/2 1.95 160 25 640 5.0 1 25.30 24GMV X25FT 3105-0030
1 1/2 1.95 160 25 640 5.0 100 .91 24GMV X100FT 3105-0004
2 2.47 115 25 460 6.0 1 34.00 32GMV X25FT 3105-0031
2 2.47 115 25 460 6.0 100 1.16 32GMV X100FT 3105-0006
2 1/4 2.76 90 25 360 7.0 100 1.26 36GMVXCTN* 3105-0008
2 1/2 3.02 70 25 280 7.0 100 1.39 40GMV X100FT 3105-0010
3 3.51 60 25 240 9.0 100 1.63 48GMV X100FT 3105-0014
3 1/2 4.01 55 25 220 10.0 100 1.80 56GMV X100FT 3105-0015
4 4.51 55 25 220 12.0 100 2.05 64GMV X100FT 3105-0018
PAGE 40
Industrial Hose Products
RECOMMENDED FOR: Used to transfer chemcials and fill tanks on blender trucks, such as “Chem
Add” applications. Special chemical resistant tube. Gates added a second layer
of wire braid to make the hose extra durable. The perforated cover provides
multi-purpose use including the transfer of nitrogen gas. The Hypalon® cover
provides additional resistance to oil and environmental conditions.
CAUTION: 1000 psi maximum working pressure for liquids.
300 psi maximum working pressure for gases.
TEMPERATURE: -40°F to +300°F (-40°C to +150°C)
Tube: Type J (CPE). Black.
CONSTRUCTION:
Reinforcement: Braided, high tensile steel wire.
Cover: Type M (Hypalon®). Blue. Perforated.
Design Factor: 4:1
COUPLINGS: Megacrimp® (G), GlobalSpiral™ (GS) and Stainless Steel couplings (B-SS)
PACKAGING: Reel. Minimum length of 10 ft. BB = max of 4 lengths. GG = max of 3 lengths
BRANDING: White letters. Example: “Gates® Black Gold® Oilfield Service 3/8” [9.5mm]
<1000 PSI [70Bar] Max Liquid Working Pressure. 300 PSI [21 Bar] Max Gas
Working Pressure> MSHA 2G-11C
OPTIONS: None.
STANDARDS: ARPM (Class A) High Oil Resistant Tube and MSHA 2G-IC-11C Flame Resistant
Cover. Made in the U.S.A.
PAGE 41
Industrial Hose Products
RECOMMENDED FOR: Transfer of non-potable water or liquids not containing oils or chemicals from a
supply ship to an offshore drilling rig or platform. Various water-based transfer
applications for offshore or onshore work sites. The heavy duty reinforcement
is designed to survive extreme oilfield application requirements. The specially
compounded cover material is designed to withstand the harshest environment
including abrasion and weathering.
Design Factor: 3:1
Standards: ABS type approval. (200D with 5:1 design factor)
RECOMMENDED FOR: Transfer of non-potable water or liquids not containing oils or chemicals from a
supply ship to an offshore drilling rig or platform. Various water-based transfer
applications for offshore or onshore work sites. The heavy duty reinforcement
is designed to survive extreme oilfield application requirements. The specially
compounded cover material is designed to withstand the harshest environment
including abrasion and weathering.
Design Factor: 3:1
Standards: ABS type approval. (200D with 5:1 design factor)
PAGE 42
Industrial Hose Products
PAGE 43
Industrial Hose Products
RECOMMENDED FOR: Transfer of abrasive, water based and petroleum based drilling fluids from a
supply ship to an offshore drilling rig or platform; and for transfer applications
on offshore or onshore drilling rigs or platforms. The nitrile tube material is
designed to provide chemical resistance to petroleum based fluids. It uses
the same tube compound as Gates Black Gold® Grade D & E Rotary & Vibrator
hoses. The heavy duty reinforcement is designed to survive extreme oilfield
application requirements. The neoprene cover material is designed to withstand
the harshest offshore environment including abrasion, weathering (cracks) and
extra chemical resistance for any petroleum products that may come in contact
with the cover.
Design Factor: 4:1
Standards: ABS approval pending
RECOMMENDED FOR: Transfer of abrasive, water based and petroleum based drilling fluids from a
supply ship to an offshore drilling rig or platform; and for transfer applications
on offshore or onshore drilling rigs or platforms. The nitrile tube material is
designed to provide chemical resistance to petroleum based fluids. It uses
the same tube compound as Gates Black Gold® Grade D & E Rotary & Vibrator
hoses. The heavy duty reinforcement is designed to survive extreme oilfield
application requirements. The neoprene cover material is designed to withstand
the harshest offshore environment including abrasion, weathering (cracks) and
extra chemical resistance for any petroleum products that may come in contact
with the cover.
Design Factor: 4:1
Standards: ABS approval pending
PAGE 44
Industrial Hose Products
RECOMMENDED FOR: Transfer of abrasive materials such as barite and cement from a supply ship
to an offshore drilling rig or platform; and for transfer applications on offshore
or onshore drilling rigs or platforms. The natural rubber tube is specially
compounded to conduct electricity and made with extra thickness to resist
abrasion. The heavy duty reinforcement is designed to survive extreme oilfield
application requirements. The specially compounded cover material is designed
to withstand the harshest environment including abrasion and weathering.
Design Factor: 4:1
Standards: ABS type approval. (200D with 5:1 design factor)
RECOMMENDED FOR: Transfer of abrasive materials such as barite and cement from a supply ship
to an offshore drilling rig or platform; and for transfer applications on offshore
or onshore drilling rigs or platforms. The natural rubber tube is specially
compounded to conduct electricity and made with extra thickness to resist
abrasion. The heavy duty reinforcement is designed to survive extreme oilfield
application requirements. The specially compounded cover material is designed
to withstand the harshest environment including abrasion and weathering.
Design Factor: 4:1
Standards: ABS type approval. (200D with 5:1 design factor)
PAGE 45
Industrial Hose Products
Chem Master® PLUS XPLE 250 SD CHEM MASTERTM PLUS XLPE 250SD 250PSI (13.8Bar)
Transfer of chemical products from a
RECOMMENDED FOR:
supply ship to an offshore drilling rig or
platform; and for transfer applications on offshore or onshore drilling rigs or platforms.
Design Factor: 5:1
Wt Per Ft
Hose ID Hose OD Max. W.P. Vac MBR (hose) Length MOQ
Pkg Gates Item
(in) (in) (psi) (in Hg) (in) (lbs) (kg) (ft) Std Pack Code (ft) No
1 1.50 250 30 5.0 0.56 200 ft Pall CW Stock 4695-0933
2 2.58 250 30 10.0 1.19 200 ft Pall CW Stock 4695-0934
3 3.71 250 30 18.0 2.37 200 ft Pall CW Stock 4695-0935
4 4.70 250 30.1 24.0 3.05 200 ft Pall CW Stock 4695-0936
PAGE 46
Industrial Hose Products
The Gates lineup of new well completion products are designed to stand up to the
harshest applications and are built specifically to keep your operations running at
maximum production.
UltraBrasion covers have improved abrasion resistance that resists cutting and gouging during horizontal Fracing applications
where the hose rests on a conglomerate drilling pad. A yellow wear indicator layer provides visual notification.
MegaTuff covers have improved abrasion resistance and are appropriate for Fracing applications where the hose will rest on
metal surfaces like truck bumpers or high pressure lines.
PAGE 47
Industrial Hose Products
PAGE 48
Industrial Hose Products
Gates hoses in the acid-chemical product family provide suction and discharge transfer
of virtually all basic acids and chemicals.
Chem Master® Modified XLPE (125-200) SD
Gates Gatron™ modified cross-linked polyethylene tube
construction makes this hose the preferred choice for
conveying more than 950 basic acids and chemicals.
Design Factor 4:1
Nom ID Nom OD Working Min Bend Wt Per Ft Standard
(in) (in) Pressure (psi) Radius Cover Type (lbs) Pack Product No.
3/4* 1.25 200 4.0 Black 0.45 100 ft 4695-0002
1* 1.50 200 5.0 Black** 0.56 100 ft 4695-0003
1-1/4 1.75 200 6.0 Black 0.70 100 ft 4695-0004
1-1/2* 2.04 200 8.0 Black** 0.87 100 ft 4695-0005
2* 2.54 200 9.0 Black** 1.08 100 ft 4695-0001
2-1/2 3.05 150 12.0 Black 1.41 100 ft 4695-0006
3 3.58 150 18.0 Black** 1.81 100 ft 4695-0007
4 4.69 150 24.0 Black 2.72 100 ft 4695-0008
*Crush Resistant construction also available.
**Green cover also available.
PAGE 49
Industrial Hose Products
2 2.45 150 30.0 2.0 0.97 100 ft* 4688-2011
3 3.44 150 30.0 3.0 1.46 100 ft* 4688-2015
4 4.48 150 30.0 4.0 2.22 100 ft* 4688-2018
PAGE 50
Industrial Hose Products
PAGE 51
Industrial Hose Products
The workhorse in the oil and gas industry, we have expanded our vacuum hose product
line to provide solutions for every application need.
Black Gold® Super-Vac® (60-150) SD MegaFlex®
When tight bends are a challenge, call on Super-Vac®
MegaFlex® hoses. Same heavy duty 4:1 design as
Super-Vac with maximum (1:1) bend radius for oilfield suction and pressure applications including a
200# working pressure in 4”. Design Factor 4:1
Nom ID Nom OD Working Suction Min Bend Wt Per Ft Standard Product No.*
(in) (in) Pressure (in. Hg) Radius (lbs) Pack
(psi)
Nom ID Nom OD Working Suction Min Bend Cover Wt Per Ft Standard Product No.
(in) (in) Pressure (in. Hg) Radius Type (lbs) Pack
(psi)
PAGE 52
Industrial Hose Products
WATER HOSE
Gates line of water transfer hoses are resistant to abrasion, UV, ozone, and weathering –
yet lightweight and flexible.
PAGE 53
Power Transmission Products
PAGE 54
GATES CORPORATION For more information on Gates oilfield products,
Gates.com visit www.gates.com/oilfield
For in-depth technical support, contact ©2015 Gates Corporation
Gates Product Application at 303.744.5800 33498-000 7/2015