Professional Documents
Culture Documents
MI-J00
Military DC-DC Converters 10 to 50W
Features
Inputs: Up to 90% efficiency
28Vdc per MIL-STD-704D/E Remote sense
155Vdc per MIL-STD-1399A Current limit
270Vdc per MIL-STD-704D/E
ZVS/ZCS power architecture
Single output: 2 – 48Vdc
Low noise FM control
Up to 23W/in3
Size: 2.28" x 2.4" x 0.5"
MIL-STD-810 environments (57,9 x 61,0 x 12,7mm)
Product Highlights
The MI-J00 family of miniaturized
DC-DC converters is designed for
military applications utilizing Converter Specifications
distributed power architectures. (At TBP = 25°C, nominal line and 75% load, unless otherwise specified)
Based on Vicor’s 1st Generation
PARAMETER MIN TYP MAX UNITS TEST CONDITIONS
family of zero-current/zero-voltage
switching, component-level, Input Characteristics
Input voltage range See input voltage chart
DC-DC converters, the MI-J00 No load power dissipation 1.35 2.0 Watts
family offers state-of-the-art
Output Characteristics
performance in terms of power Set point accuracy 0.5 1.0 % Vnom
density, efficiency, noise, ease of Load/line regulation 0.05 0.2 % Vnom LL to HL, 10% to FL
use, and reliability. 0.2 0.5 % Vnom LL to HL, NL to 10%
Output temperature drift 0.01 0.02 %/°C
The MI-J00 family is designed to Output noise - pp 1.0 1.5 % Vnom Whichever is greater
exceed all steady-state, transient 100 150 mV } 20MHz BW
Output voltage trimming(1) 50 110 % Vnom
and under/overvoltage Remote sense compensation 0.5 Vdc
requirements of MIL-STD-704D/E OVP set point N/A
for both 28Vdc input (MI-J20) and Current limit 105 125 % Inom Auto restart
Short circuit current 105 130 % Inom
270Vdc input (MI-J60), and the
worst case envelope of DOD-STD- Control Pin Characteristics
Gate-in high threshold 6 Vdc
1399A for 155Vdc input. Gate-in low threshold 0.65 Vdc
Gate-in low current 6 mA
The output voltage can be externally
trimmed or programmed from Isolation Characteristics
Isolation (input to output) 3,000 Vrms
50% to 110% of nominal output. Isolation (output to baseplate) 500 Vrms
Current limiting, remote sense, Isolation (input to baseplate) 1,500 Vrms
and an inhibit pin all combine to Input/output capacitance 50 75 pF
offer a high degree of protection, Environmental (MIL-STD-810)
versatility, and reliability for Altitude - method 500.2 70,000 feet Procedure II
Humidity - method 507.2 86/240 % /hours Procedure 1, cycle 1
military power systems.
Acceleration - method 513.3 9 g's Procedure 2
All units are manufactured Vibration - method 514.3 20 g's Procedure 1, category 6
Shock - method 516.3 40 g's Procedure 1
in ISO 9001-registered facilities.
Reliability (MIL-HDBK-217F)
Full epoxy encapsulation in
25°C Ground Benign: G.B. 2,871,050 hours
Vicor’s industry standard 50°C Naval Sheltered: N.S. 667,568 hours
package enables the MI-J00 65°C Airborne Inhabited Cargo: A.I.C. 559,855 hours
family units to meet MIL-STD-810 Thermal Characteristics
environmental testing Efficiency 80-90 %
requirements for humidity, Baseplate to sink 0.14 °C/W With thermal pads
Thermal shutdown N/A
fungus, salt fog, explosive Baseplate operating temperature +100 °C See product grade
atmosphere, acceleration, Storage temperature +125 °C See product grade
vibration, and shock. (See page 32.) Mechanical Specifications
Weight 3.0 (85) ounces (grams)
(1) 10V, 12V, and 15V outputs, standard trim range ±10%. Consult factory for wider trim range.
MI-J00 10/02 1 of 2
Configuration Chart
Mechanical Drawing
2.28
(57,9)
0.49 1.30
(12,4) (33,0) 0.080 Dia (2) places
0.65 Solder plate
(16,5) over copper alloy
0.30±0.015
(7,6)±(0,38)
Pin # Function
1 +In
4 9 2 Gate In
3 8 3 Gate Out
2.10 1.40 4 –In
(53,4) MI-J00 7
1.00 (35,6)
0.70 (25,4) 5 +Out
2 6
0.40 (17,8) 6 +Sense
(10,2)
1 5 7 Trim
0.35± 0.015
(8,9)±(0,38) 8 –Sense
9 –Out
0.15 FULL R
(3,8) 0.040 (1,0) Dia (7) places
0.15 Solder plate
(3,8) over copper alloy
Product ID 2.40
this surface (61,0)
1.90 0.30
1.75
(48,3) 0.22 (7,6) Min. (44,4) Max.
(5,6) Min.
.01
0.12
(3,0) Aluminum Base
MI-J00 10/02 1 of 2
This datasheet has been downloaded from:
www.DatasheetCatalog.com