Professional Documents
Culture Documents
This specification covers low carbon, flat rolled, steel for use in pole line hardware and screw
anchors. The purpose of this specification is to provide maximum material availability while
insuring minimum product performance requirements can be met. The steel shall conform to the
specifications in ASTM A568 except as noted.
**Silicon content is a critical feature for all raw material intended to be galvanized in the U.S. These
requirements may be considered reference only if the material in question is sourced complete (already
galvanized) and meets all galvanizing requirements specified on the applicable drawing.
This material may be cold formed, welded, hot forged, and hot dip galvanized.
The supplier shall supply certification of the heat analysis for the specified elements listed above.
CONFIDENTIAL: THIS DRAWING AND ITS CONTENTS ARE CONFIDENTIAL AND THE EXCLUSIVE PROPERTY OF HUBBELL /
A.B. CHANCE COMPANY. NO PUBLICATION, DISTRIBUTION, OR COPIES MAY BE MADE WITHOUT WRITTEN CONSENT BY
HUBBELL / A.B. CHANCE COMPANY. ©HUBBELL / A.B. CHANCE. UNPUBLISHED - ALL RIGHTS RESERVED UNDER THE
COPYRIGHT LAWS.