Professional Documents
Culture Documents
Powder Clutch/Brake
Specifications
Tension Controller
L3 L2 L4
Lead wire length 200
L7 L8
45゚
Tension Meter/Tension Amplifier
4-φS
L5 T
L6
φD2
φd
φD1
φD3
φD4
Tension Detector
φd
A-22
Characteristics
●●Standard torque characteristics (typical example)
Powder Clutch/Brake
3 8
6
2
Hysteresis Clutch/Brake
Torque (N·m)
Torque (N·m)
ZKG-20YN
ZKG-50YN
4
ZKG-10YN
1
2
ZKG-5YN
Tension Controller
0 0.1 0.2 0.3 0.4 0.5 0 0.1 0.2 0.3 0.4 0.5 0.6
Exciting current (A) Exciting current (A)
●●Allowable continuous heat dissipation characteristics ●●Allowable continuous slip torque characteristics
(heat dissipation area of the mounting plate is 350 cm2 or more)
Allowable continuous heat dissipation (W)
10
Clutch Amplifier
ZKG-50YN
ZKG-50YN (40 W) 5
ZKG-20YN
ZKG-20YN (30 W)
Torque (N·m)
ZKG-10YN
1
ZKG-10YN (20 W)
ZKG-5YN
0.1
10 100 1000 2000
Input rotation speed (r/min) Input rotation speed (r/min)
Mounting example
Tension Detector
(1) Fasten the fitting part of the mounting flange to the mounting plate and fix it.
Mounting flange
(2) Always use an elastic coupling to connect the brake shaft and load shaft, and set the
concentricity, perpendicularity, etc. of the shafts at this time within the allowable value
of the elastic coupling to be used.
Elastic coupling (3) When mounting a pulley or the like, ensure it is within the range of allowable shaft load
(see page A-53).
(4) The heat dissipation area of the mounting plate should be at least 350 cm2.
Common Item
Mounting
plate
A-23