Professional Documents
Culture Documents
SA Series RoHS Pb e3
Description
Bi-directional
The SA Series is designed specifically to protect sensitive
electronic equipment from voltage transients induced by
lightning and other transient voltage events.
Features
Uni-directional
• 500W peak pulse • EFT protection of data
capability at 10/1000μs lines in accordance with
waveform, repetition rate IEC 61000-4-4
(duty cycles):0.01% • Low incremental surge
• VBR @ TJ= VBR@25°C resistance
Agency Approvals x (1+αT x (TJ - 25)) • Typical IR less than 1μA
(αT:Temperature when VBR max>13V
Agency Agency File Number Coefficient, typical value • High temperature
E230531 is 0.1%) to reflow soldering
• Glass passivated chip guaranteed: 260°C/40sec
junction in DO-15 Package / 0.375”,(9.5mm) lead
Maximum Ratings and Thermal Characteristics • Fast response time: length, 5 lbs., (2.3kg)
(TA=25OC unless otherwise noted) typically less than 1.0ps tension
from 0 Volts to BV min • Plastic package is
Parameter Symbol Value Unit • Excellent clamping flammability rated V-0 per
Peak Pulse Power Dissipation by 10/1000μs Test capability Underwriters Laboratories
PPPM 500 W
Waveform (Fig.2)(Note 1)
• Typical failure mode is • Matte tin lead–free plated
Steady State Power Dissipation on Infinite Heat short from over-specified
Sink at TL=75ºC
PD 3.0 W • Halogen free and RoHS
voltage or current compliant
Peak Forward Surge Current, 8.3ms Single Half
IFSM 70 A • Whisker test is conducted
Sine Wave Unidirectional Only (Note 2) • Pb-free E3 means 2nd
Maximum Instantaneous Forward Voltage at 35A based on JEDEC level interconnect is Pb-
VF 3.5 V
for Unidirectional Only JESD201A per its table 4a free and the terminal finish
Operating Junction and Storage Temperature -65 to and 4c material is tin(Sn) (IPC/
TJ , TSTG °C
Range 175
• IEC-61000-4-2 ESD JEDEC J-STD-609A.01)
Typical Thermal Resistance Junction to Lead RθJL 20 °C/W 30kV(Air), 30kV (Contact)
Typical Thermal Resistance Junction to Ambient RθJA 75 °C/W • ESD protection of data
Notes: lines in accordance with
1. Non-repetitive current pulse , per Fig. 4 and derated above TJ (initial) =25OC per Fig. 3.
2. Measured on 8.3ms single half sine wave or equivalent square wave, duty cycle=4 per minute maximum.
IEC 61000-4-2
Applications
Cathode Anode
Uni-directional
Uni-directional
Bi-directional
Ipp
Vc VBR VR IT
V Vc VBR VR IR
IR VF V
IT IR VR VBR Vc
IT
Ipp Ipp
Figure 1 - TVS Transients Clamping Waveform Figure 2 - Peak Pulse Power Rating
0.1
0.001 0.01 0.1 1 10
Td - Pulse Width(ms)
Time
150
100 tr=10µsec TJ=25°C
Peak Pulse Power (PPP) or Current (IPP)
75 IPPM
100
Half Value
50
( )
IPPM IPPM
2
50 10/1000µsec. Waveform
25 as defined by R.E.A
0 td
0 25 50 75 100 125 150 175 200 0
0 1.0 2.0 3.0 4.0
TJ - Initial Junction Temperature (ºC) t-Time (ms)
100
10000
Transient Thermal Impedance ( °C/W)
Bi-directional V=0V
Uni-directional @ VR
Cj (pF)
100
Bi-directional @ VR 1
10
Tj=25C
f=1.0MHz
Vsig=50mVp-p
1 0.1
1.0 10.0 100.0 1000.0 0.01 0.1 1 10 100 1000
VBR - Reverse Breakdown Voltage (V) TP - Pulse Duration (s)
Figure 7 - Maximum Non-Repetitive Forward Surge Figure 8 - Peak Forward Voltage Drop vs Peak Forward
Current Uni-Directional Only Current (Typical Values)
100.0
120
IFSM - Peak Forward Surve Current(A)
100
I F - Peak Forward Current(A)
10.0
80
60
40 1.0
20
0
1 10 100 0.1
Number of Cycles at 60 Hz 0.0 1.0 2.0 3.0 4.0 5.0
VF - Peak Forward Voltage(V)
Soldering Parameters
Temperature (T)
Average ramp up rate (Liquidus Temp (TA) to peak 3°C/second max Ts(max)
Dimensions
Inches Millimeters
Dimensions
Cathode Band Min Max Min Max
D (for uni-directional products only)
A 1.000 - 25.40 -
B 0.230 0.300 5.80 7.60
C C 0.028 0.034 0.71 0.86
D 0.104 0.140 2.60 3.60
A B A
DO-204AC (DO-15)
SA xxx XX X
Cathode Band
Option Code: (for uni-directional
Blank Reel Tape products only)
F
-B Bulk Packaging YYWW
Littelfuse Logo Trace Code Marking
Type Code: YY:Year Code
A Uni-Directional (5% VBR Voltage Tolerance) WW: Week Code
CA Bi-Directional (5% VBR Voltage Tolerance)
Series Code:
Packaging
Component Packaging
Part Number Quantity Packaging Specification
Package Option
SAxxxXX DO-204AC 4000 Tape & Reel EIA STD RS-296
SAxxxXX-B DO-204AC 1000 Bulk Littelfuse Spec.
Off Center
2.56 2.063+0.079/-0.039
either side
(65.0) (53.0+2.0/-1.0)
0.028(0.7)
0.047 0.236
(1.2) (6.0)
0.197+/-0.020
(5.0+/- 0.5)
Dimensions are in
13.0 inches/mm
(330.2)
3.0
(76.2)
0.68
(17.27)
2.75
(69.85)
Direction of Feed
Recess Depth Max. 0.75 (19.05)
Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are
not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at www.littelfuse.com/disclaimer-electronics.
© 2020 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: BA.08/31/20