Professional Documents
Culture Documents
Document Checking and Disinfection Area – this will be located beside the main road
that serves as the entry point of the travelers to the swab testing facility. It will have
three rooms for the personnel that will have to do checking the documents and
assessing them for the procedures of the testing. Each room for the document
checking and temperature checking will have at least 2 meters in width and 3 meters
in length enough for the personnel who will do the checking and the materials needed
for the process. The personnel/s assign in this area will also orient the travelers on
the procedure they need to follow in the entire testing process. The disinfection area
will be placed on the right side of the building having a width of at least 4.5 meters
that can cater 3 (three) persons at a time. The facility was designed in this manner
following the health protocols and standards given by the IATF/DOH in controlling
2. Confirmatory Area – It will be the building where the testing will be conducted. It
will consist of a waiting area, laboratory technician room, processing area, and a
storage room. It will have a dimension of at least 10.5 x 6.5 metes for the entire
building. The waiting was placed near the entrance of the building where the travelers
can easily proceed to the processing room where the sample will be collected. The
processing room was designed beside the laboratory technician for an easy transfer of
specimen to the laboratory. The laboratoy has a storage room for where test kits to
keep it
organize and safe. The building will also have a comfort room for the travellers in
case they needed it and enough windows to keep the building ventilated. The
travellers will pick-up the results in the pick-up area where further instructions will be
3. Holding area – this will serves as a temporary holding area for travellers that will test
positive of COVID-19 until their respective LGU’s retrieve them. It can cater up to
seven (7) travellers. The building will have a floor area of at least 10.5 x 6.5 meters. It
was designed with at least eleven( 11) meters away from both the road and the
confirmatory facility enough to keep them isolated from others and keep their
privacy. Each room will have a dimension at least 2 x 2.8 meters as shown in the
design template with a bed which enable them to rest before their retrieval.
Attendant’s desk will placed near the entrance of the building to assist the travellers if
they have concerns. It will also have at least one (1) common toilet for the travellers.
Tents will also be placed in the road that serves as the entry point of the vehicles and where the
vehicle disinfection is done. It was designed with two chambers for four (4) wheeled vehicles
and for single motor vehicles. It will have disinfectant tank equipped with a water pump and
remote control atomizing nozzle for disinfection. A parking area was also designed where the
travellers can park their vehicles after disinfection and while the test is conducted.s