Professional Documents
Culture Documents
Geometry:
Supports:
Spring supports:
----- position ---- ------------ rigidity ---------
Package layer x y z Cx Cy Cz
mm mm mm N/mm N/mm N/mm
1 1 0.00 0.00 0.00 1.00000e+000 1.00000e+000 0.00000e+000
1 1 1500.00 0.00 0.00 0.00000e+000 1.00000e+000 0.00000e+000
Point fixings:
Position of point fixings:
------ position -------- -- spring rigidities at base point of the point fixing ---
reference x y z Cx Cy Cz C(phi) C(theta)
mm mm mm N/mm N/mm N/mm Nmm/rad Nmm/rad
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: GLASS-JAIN JAINS SAFILGUDA - 6 SIDED SUPPORT 07-07-2021 Page: 2
Contact settings:
without contact approaches between bush-glass
without contact approaches between shim-glass
Layers:
Mechanical properties:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: GLASS-JAIN JAINS SAFILGUDA - 6 SIDED SUPPORT 07-07-2021 Page: 3
Loads:
Face loads:
(constant distributed):
Package pressure
N/mm²
1 1.36000e-003
Dead weight:
Direction vector of gravity acceleration [9.81 m/s²]:
Vx Vy Vz
0.00000 -1.00000 0.00000
Calculation approaches:
Calculation results:
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: GLASS-JAIN JAINS SAFILGUDA - 6 SIDED SUPPORT 07-07-2021 Page: 4
Spring forces and deformations at base point of point fixing: (order as defined above)
u v w phi theta Fx Fy Fz M_phi M_theta
mm mm mm rad rad N N N Nmm Nmm
(x: 1400.00 y: 1637.00)
-0.05 -0.26 1.86 1.192e-002 -2.117e-004 -50.76 -258.85 1862.56 0.00 0.00
(x: 100.00 y: 1637.00)
0.05 -0.26 1.86 -1.192e-002 -2.116e-004 50.74 -258.84 1862.57 0.00 0.00
(x: 1400.00 y: 3174.00)
-0.03 -0.31 0.74 9.015e-003 9.982e-003 -33.76 -306.29 737.47 0.00 0.00
(x: 100.00 y: 3174.00)
0.03 -0.31 0.74 -9.015e-003 9.982e-003 33.76 -306.28 737.47 0.00 0.00
(x: 1400.00 y: 100.00)
-0.03 -0.21 0.73 9.015e-003 -1.055e-002 -33.38 -209.79 734.39 0.00 0.00
(x: 100.00 y: 100.00)
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.
Project: GLASS-JAIN JAINS SAFILGUDA - 6 SIDED SUPPORT 07-07-2021 Page: 5
0.03 -0.21 0.73 -9.015e-003 -1.055e-002 33.34 -209.78 734.39 0.00 0.00
This protocol was created using SJ MEPLA. Copyright 2000-2005 by SJ Software GmbH Aachen, Germany.