Professional Documents
Culture Documents
SAPFOAM 323D-M
Polyurethane Spray System
INTRODUCTION
SAPFOAM 323D-M is a CFC free Polyurethane system developed for the manufacturing of rigid
polyurethane foam Mixed with SAPISO. It has been specially designed for sandwich panel application by
discontinuous method. The foam has excellent mechanical property. This product is classified as B3
according to DIN 4102.
Application.
SAPFOAM 323D-M is mainly used for the production of Discontinuous sandwich panel. It’s also
recommended to be used in cavity, molding and pour in place.
Typical Specification.
Appearance Liquid
Viscosity @25°C 300±70 cps
Specific gravity @25°C 1.151±0.1
Process parameter.
The chemical should be adjusted at to correct temperature before using it to ensure both reactivity and
viscosity is suitable for process.
Reactivity is as follow.
Cream time 04±2 sec
Gel time 16±5 sec
F.R.D 28±1.5 kg/m3
F.R.D and reaction profile can be adjusted according to customer requirement.
Typical Physical Properties
Machine Type.
Utilized for most of the foaming machine type.
Packing.
SAPFOAM 323D-M : 220 Kg net
Storage Recommendation.
The SAPFOAM 323D-M drum should be stored in cold area below 20°C.
SHELF LIFE.
Under mentioned storage condition SAPFOAM 323D-M has a shelf life of 6 months from the date of
Production.
Health and Safety.
The appropriate health and safety advice can be found in the provisionalmaterialsafety data sheet(MSDS)
Disclaimer.
The information provided here is for reference only. The specification will be
provided in the quality certificate or in the contract. We have no control over whatanotherparty does with
the material and we will not take any responsibility for anotherparty’s actions. Nor we have any
responsibility for any indirect damages while usingour products.
For more information, pleaserefer to our MSDS or contact our customer SERVICE CENTER