Professional Documents
Culture Documents
Mastercam 2022 Basics Tutorial - Part29
Mastercam 2022 Basics Tutorial - Part29
5. On the View tab, select Show Gnomons. The WCS gnomon displays. The text indicates that the WCS is set to the
Top plane, and the Cplane and Tplane are also set to Top.
85
Mastercam Basics Tutorial—5: Viewing Your Part
7. You can also use the right-click menu to change the view. Practice switching to other views using this menu.
9. Click Show Gnomons to turn off the display of gnomons in the graphics window.
10. On the View tab, select Unzoom 80% to reduce the size of the part on the screen.
11. On the View tab, select Fit. You can also press [Alt+F1].
86
Mastercam Basics Tutorial—5: Viewing Your Part
NOTE
Fit and several other Zoom commands are also available in the right-click menu.
1. Place your cursor in the upper left quadrant of the graphics window.
2. If your mouse has a middle mouse wheel, spin it back and forth to dynamically zoom in and out. You can also
press the [Page Up] and [Page Down] keys on your keyboard to zoom in and out.
87