Professional Documents
Culture Documents
PRODUCTS
API Plan 14
EagleBurgmann API piping plans - Overview
Process side
Between seals
Atmospheric side
Engineered
API Plan 14
2 To pump suction
5 Quench (Q)
6 Drain (D)
7 Seal chamber
https://www.eagleburgmann.com/en/products/api-682-4th-edition-piping-plans/process-side/api-plan-14 1/3
30/07/2021 API Plan 14 - EN
● Plan 14 is a combination of Plan 11 ● Generally used on vertical pumps. ● Orifice size should be at least 3 mm
and Plan 13. (1/8").
● Acts as a flushing as well as a self- ● The flow of the flush fluid across the
venting plan. seal chamber must be sufficient to
● Cool fluid enters from Plan 11 piping, remove the heat and increase the
and hot fluid as well as seal chamber pressure. Orifice size to be
pressure is relieved through Plan 13 calculated carefully to ensure
piping. desired flush flow-rate.
● The flush is directed onto the seal ● Not applicable if difference between
faces. seal chamber pressure and suction
● Allows creation of sufficient vapor pressure is very low. In this case
pressure margin independent of Plan 13 is recommended.
throat bushing design. ● A high-point vent must be provided
in the vertical pump seal chamber
(or seal gland) to ensure seal faces
never see vapors.
● Clean, non-polymerizing fluids with ● Process side 1CW-FL, 1CW-FX, 2CW-CW, 2CW-CS,
moderate temperature. ● Flushing and cooling 3CW-FB
● Light hydrocarbons.
3CW-BB*, 3CW-FF*
https://www.eagleburgmann.com/en/products/api-682-4th-edition-piping-plans/process-side/api-plan-14 2/3
30/07/2021 API Plan 14 - EN
Carbon floating ring seals Service programs Petrochemical industry Exhibitions and events
Packings & Gaskets DGS Centers of Competence Chemical industry Research and development
API 682 4th edition product range Power plant technology Group procurement
Mining industry
Shipbuilding
Aerospace industry
ABOUT US NEWSLETTER
© 2021 EagleBurgmann
Login
Portal
Terms-/conditions
Purchase conditions
Data privacy statement
Legal
Contact
Cookie settings
https://www.eagleburgmann.com/en/products/api-682-4th-edition-piping-plans/process-side/api-plan-14 3/3