Introduction International Standards Cold Formed Steel construction is an advanced The following International Standards correspond and precise system using the latest technology. As in full or in part to the manufacturing and with all advanced technology the use of materials processing of material dimensions listed in this with the correct specifications is essential to document: ensure the total system will function efficiently and ISO 3575:2005 Continuous hot-dip zinc-coated as designed. carbon steel sheet of commercial and drawing Materials and components with proven quality qualities. levels will give the engineer, specifier and final ISO 4998:2005 Continuous hot-dip zinc-coated customer confidence in the long-term integrity of carbon steel sheet of structural quality their project. ISO 1460 Metallic coatings - Hot dip galvanized General Description coatings on ferrous materials - Gravimetric determination of the mass per unit area. SS 340 / SS 550 is a hot dipped galvanized Typical Dimensional Combinations structural grade steel developed specifically to maximize the efficiency of cold formed steel Thickness (BMT) Typical Slit Widths construction projects. 0.55mm 188mm 0.75mm 188mm It provides the highest yield strength to minimize the total steel requirement in each of your 0.95mm 188mm engineered structures. 1.15mm 188mm Typical slit coil weights range from 800 - 1300kg Most importantly it is supplied with full compliance Typical pack weights range from 3500 - 5000kg certificates to assure specifiers the materials are compliant to International Standards. Typical Mechanical Properties Requirement (Base Metal)-SS340 Mechanical Property Typical Result Application Yield Strength 350 MPa (min.) SS 340 / SS550 is the ideal steel specification for all Tensile Strength 490 MPa (min.) structural steel framing applications to provide 16% Elongation - % Lo - 50mm benefits in transportable & modular projects, high Ductility Ratio (Tensile : Yield) 1.30 volume social housing, bespoke architectural designs or even light commercial applications. 1800 Transverse Bend 3t (Coating Adherence) Thickness Tolerance: +/- 0.09mm It will allow compliance to all major Building Codes Coating Mass 275 g/m2 (G90) and Standards by ensuring your frames offer the highest capacities required. Coating Type Hot Dip Galvanised
Coating SS 340 / SS550 is hot-dip galvanized to a weight of 275gm/m2 (Z275) which is ideal for use in permanent structures and it is supplied with a regular spangle as standard.