Professional Documents
Culture Documents
you can only put angle and not give any fixed value of measurement.
to repeat the option various times we can select multiple times and then repeat
process many times.
5. therer are snap settings then where we can select mid point , quadrant ,
extension, perpendicular etc. (f3)
6. snap (f11)
9. enter line command and then press and hold shift and then right click a menu
will apppear and then select different lines like tangent etc. you want.
eg - to make a tangent to two circles press line command and then select tangent
and move that line towards the circle two repeat the process to get a line that is
tangent to both the circles.
10. if you want to deselect a line that press and hold shift and the n select the
line .
11. we can join two curves with the option of blend curves presnet under the fillet
option and after blending the curves the line will be spline and we need to convert
th espline to polyline if we need to use array.
12. if we want to touch the arc with the circle we can go to the parametric and
then we can select tangent exponential and touch both the arc and the circle
tangentially.
13. we can press and hold th eshift key to convert the extend key to trim key.
14. if you make certain object or deisgn using different lines and tools and then
you can select it and press join to form them into a single line/ tool object.
15.