Professional Documents
Culture Documents
5
YEARS • Universal input voltage 100-277 VAC
▶ Full load: 100W at 220V and 70W at 110V Rated supply voltage 100-277 VAC
▶ Active Power Factor Correction over 0.95 at full load Input voltage 90-305 VAC
to allow power distribution at its maximum efficiency
Frequency range 47 - 63Hz
▶ Efficiency over 85%
Power factor PF ≥0.95 at 277 VAC (at full load)
▶ Protection against short-circuit, over temperature, Input
Efficiency
and overload ≥85% at 277 VAC (at full load)
▶ Metal casing fully encapsulated Inrush current Cold star: 60A Max./240VAC
▶ Complies with Class C in the full range load according Leakage current ≤0.7mA at 240VAC
38mm/1,5" Output
Start up time 0-1S / 100VAC, 0-0.5S / 277VAC
Surge
L-N,6KVAC, L(N)-FG,6KVAC
34mm 51mm 63mm impulse test
/1,3" /2" /2,5"
R5mm/0,2" Working Temperature -40°C / +50°C (at full load)
Environment
Storage Temperature -40°C/+80°C, 10-95% RH
LABEL
100-277V~ = 80ć
Max 0.82A lout
.8.33A /100W (180-277V~)
.5.83A / 70W (100-180V~)
-40~+50℃/full load
www.ledit-yaki.com M M
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C ambient temperature.
2. The LED driver is considered as a component that will be operated in combination with final equipment, since EMC performance will be affected by the complete
installation, the final equipment manufacturers must re-qualify EMC directive on the complete installation again.
▶ Full load: 200W at 230V, and 150W at 110V Rated supply voltage 100-277 VAC
▶ Active Power Factor Correction over 0.95 at full load Input voltage 90-305 VAC
to allow power distribution at its maximum efficiency
Frequency range 47 - 63Hz
▶ Efficiency over 88%
Power factor PF ≥0.95 at 277 VAC (at full load)
▶ Protection against short-circuit, over temperature,
Efficiency ≥88% at 277 VAC (at full load)
and overload Input
▶ Natural convection cooling Rated current
≤1,1A at 230 VAC 50Hz (at full load 200W)
≤1,9A at 100 VAC 50Hz (at full load 150W)
▶ Metal casing fully encapsulated
▶ Complies with Class C in the full range load according Inrush current
Peak 68A
90% peak 0,302μs
to EN 61000-3-2
Leakage current <0.5mA at 293.6 VAC
42,2 mm
1.66’’ Output Output ripple voltage 50mVp-p (at full load)
LABEL
www.ledit-yaki.com
1. All parameters NOT specially mentioned are measured at 220VAC input, rated load and 25°C ambient temperature.
2. The LED driver is considered as a component that will be operated in combination with final equipment, since EMC performance will be affected by the complete
installation, the final equipment manufacturers must re-qualify EMC directive on the complete installation again.
CABLE
70mm / 12,75’’
Output :
70mm / 12,75’’
Output :
MCB LOAD
Type C10 C16 C20 B10 B16 B20
Installation Ø 1,5mm 2
1,5mm 2
2,5mm 2
1,5mm2 1,5mm 2
2,5mm2
OCV Classic 200W 12V 4,6 2,8 2,4 1,8 1,1 0,8
*The values for harmonic distorsion are important and measurable starting at a minimum of 25W. The measurements are done at 230V/50Hz and fully loaded.
PACKAGING
L
CARTON OCV Classic 200W 26x25,5x23,7 0,85x0,8x0,77 10,8 23,8 8 W
L
W
CARTON PALLET
(When the min and max values are not indicated, the tolerance range for optical and electrical data is ±15 %.)