Professional Documents
Culture Documents
REVISION TRANSMITTAL
TO: Cessna Distributors, Single Engine Authorized Service Facilities, and CPC's
SUBJECT: Single Engine Service Letter SEL-05-01 Revision 1: Times Limits/Maintenance Checks -
Continuing Airworthiness Program Structural Inspections Supersedure
REASON
To change the DISCUSSION Section to make it clear that not all of the CAP Inspections have been superseded
by SID Inspections.
Please replace any copy of SEL-05-01 with the attached copy of SEL-05-01 Revision 1, which is printed in
its entirety.
NOTE: Compliance with SEL-05-01 Revision 1 is not required.
LOG OF REVISIONS
Page No. Date Page No. Date
1 November 14, 2012 4 November 14, 2012
2 November 14, 2012 5 November 14, 2012
3 November 14, 2012 6 November 14, 2012
TO:
Cessna Distributors, Single Engine Authorized Service Facilities, and affected Owners of Record
EFFECTIVITY
All Cessna Model 120, 140/140A, 150/A150/F150/FA150, 152/A152/F152/FA152, 170/170A/170B,
172/F172/FA172, 175, 177/177RG, 180, 182/A182/R182, 185/A185, 188/T188/A188, 190, 195, 205,
206/U206/P206, 207, and 210/T210/P210 airplanes
DISCUSSION
Reference Model 100 Series Piston Engine Continued Airworthiness Program Manual part number
D5133-13.
Reference Model 200 Series Piston Engine Continued Airworthiness Program Manual part number
D5121-1-13.
The purpose of this service newsletter is to provide notification that some of the existing Continued
Airworthiness Program (CAP) Manual inspections have been superseded and replaced by Supplemental
Structural Inspection Program (SID) inspections.
The SID inspections have been incorporated into the affected Maintenance/Service Manuals.
To access the SID inspections online, go to CessnaSupport.com, Customer Access. Then select either
the 100 Series or the 200 Series aircraft from the "My Models" section. On the appropriate model page
there is a link on the right hand side under "Additional Information" for "SID Information". This will take
you to all of the 100 and 200 SID documents and brochure information.
Refer to TABLE 1, TABLE 2, and TABLE 3 for the CAP inspections that have been superseded and
replaced by a SID inspection. Accomplishment of the superseded CAP inspection is no longer required.
The superseding SID inspection shall be accomplished.
NOTE: It is important to also continue to do the CAP inspections that are not listed in TABLE 1, TABLE 2,
and TABLE 3.
COMPLIANCE
Informational: This service letter is for informational purposes only.
TABLE 1: 120 thru 175 Series Airplanes Superseded CAP Inspections
CAP Number Title 120 140/ 150/ 152/ 170/ 172/ 175
140A A150/ A152/ 170A/ F172/
F150/ F152/ 170B FA172
FA150 FA152
27-20-00 Rudder Cable X
Inspection
32-10-00 Main Landing X
Gear Pivot
Inspection
SEL-05-01
Page 2 Revision 1 - November 14, 2012
Single
Engine SERVICE LETTER
SEL-05-01
TABLE 1: 120 thru 175 Series Airplanes Superseded CAP Inspections
CAP Number Title 120 140/ 150/ 152/ 170/ 172/ 175
140A A150/ A152/ 170A/ F172/
F150/ F152/ 170B FA172
FA150 FA152
57-50-00 Flap Inspection X X
57-50-01 Flap Support X X X X X X X
Bracket, Flap
Track and Roller
Inspection
57-60-00 Aileron X X X
Inspection
71-20-00 Engine Mount X X X X X X X
Welded Joint
Inspection
SEL-05-01
Revision 1 - November 14, 2012 Page 3
Single
Engine SERVICE LETTER
SEL-05-01
TABLE 2: 177 thru 195 Series Airplanes Superseded CAP Inspections
CAP Number Title 177/ 180 182/ 185/ 188/ 190 195
177RG A182/ A185 T188/
R182 A188
53-40-02 Inspect Carry X
Thru Spar
Corrosion
55-10-02 Horizontal X
Stabilizer
Attachment
Brackets
Inspection
55-20-00 Elevator Trim Tab X
Horn Inspection
55-20-01 Stabilizer Balance X
Weight Bracket
Inspection
55-30-01 Vertical Fin Rear X X X
Spar Inspection
55-30-03 Vertical Stabilizer X
Attachment
Inspection
55-40-00 Rudder Stop Clip X
Inspection
57-10-01 Wing Spar Spray X
Boom Hole
Inspection
57-10-02 Wing Strut and X X X
End Fitting
57-10-03 Wing Fuselage X X X
Attach Fittings
Inspection
57-10-05 Wing Fuselage X X X
Attach Fitting
Rear Spar Center
Lug Inspection
57-20-00 Wing Spar X
Inspection
57-50-00 Flap Inspection X X
57-50-01 Flap Support X X X
Bracket Flap
Track and Roller
Inspection
57-60-00 Aileron Inspection X X
SEL-05-01
Page 4 Revision 1 - November 14, 2012
Single
Engine SERVICE LETTER
SEL-05-01
TABLE 2: 177 thru 195 Series Airplanes Superseded CAP Inspections
CAP Number Title 177/ 180 182/ 185/ 188/ 190 195
177RG A182/ A185 T188/
R182 A188
71-20-00 Engine Mount X X X X X X X
Welded Joint
Inspection
71-20-01 Inspect Engine X X
Mount for
Corrosion
SEL-05-01
Revision 1 - November 14, 2012 Page 5
Single
Engine SERVICE LETTER
SEL-05-01
TABLE 3: 205 thru P210 Series Airplanes Superseded CAP Inspections
CAP Number Title 205 206/ 207 210/
U206/ T210/
P206 P210
57-10-04 1. 1222005-7 Stiffener - Front Spar Splice LH - Aft X X
2. 0721402-5 Stiffener - Front Spar Splice LH - Aft
3. 1222005-3 Web - Front Spar Splice LH - Aft
4. 1222005-5 Web - Front Spar Splice LH - Fwd
5. Strut Attach Hole
57-10-05 Rear Wing Spar Web - Inboard X X X
57-10-06 Wing Fuselage Attach Fittings X X X X
57-10-07 Wing Strut X X X
57-10-08 Wing and Carry-Thru Spar Inspection X
57-10-09 Forward Wing Fuselage Attachment X
57-10-10 Wing Spar Web Inspection X
57-10-11 Wing Strut Tube X X X X
57-50-01 Aileron Hinges and Aileron Corrosion X X
57-50-02 Aileron Hinge Bracket X X
SEL-05-01
Page 6 Revision 1 - November 14, 2012
Single
Engine OWNER ADVISORY
SEL-05-01
TITLE
TIME LIMITS/MAINTENANCE CHECKS - CONTINUING AIRWORTHINESS PROGRAM STRUCTURAL
INSPECTIONS SUPERSEDURE
TO:
Cessna Model 120, 140/140A, 150/A150/F150/FA150, 152/A152/F152/FA152, 170/170A/170B,
172/F172/FA172, 175, 177/177RG, 180, 182/A182/R182, 185/A185, 188/T188/A188, 190, 195, 205,
206/U206/P206, 207, and 210/T210/P210 Owners
DISCUSSION
This owner advisory is to inform you that SEL-05-01 Revision 1 has been issued.
Reference Model 100 Series Piston Engine Continued Airworthiness Program Manual part number
D5133-13.
Reference Model 200 Series Piston Engine Continued Airworthiness Program Manual part number
D5121-1-13.
The purpose of SEL-05-01 was to provide notification that some of the existing Continued Airworthiness
Program (CAP) Manual inspections have been superseded and replaced by Supplemental Structural
Inspection Program (SID) inspections.
The SID inspections have been incorporated into the affected Maintenance/Service Manuals.
The purpose of SEL-05-01 Revision 1 is to make it clear that not all of the CAP Inspections have been
superseded by SID Inspections.
To access the SID inspections online, go to CessnaSupport.com, Customer Access. Then select either
the 100 Series or the 200 Series aircraft from the "My Models" section. On the appropriate model page
there is a link on the right hand side under "Additional Information" for "SID Information". This will take
you to all of the 100 and 200 SID documents and brochure information.
Refer to TABLE 1, TABLE 2, and TABLE 3 for the CAP inspections that have been superseded and
replaced by a SID inspection. Accomplishment of the superseded CAP inspection is no longer required.
The superseding SID inspection shall be accomplished.
It is important to also continue to do the CAP inspections that are not listed in TABLE 1, TABLE 2, and
TABLE 3.
COMPLIANCE
INFORMATIONAL. This service letter is for informational purposes only.
NOTE: As a convenience, service documents are now available online to all our customers through a
simple, free-of-charge registration process. If you would like to sign up, please visit the "Customer
Access" link at www.cessnasupport.com to register.