Professional Documents
Culture Documents
(800) 547-6758
sales@portlandbolt.com
F436
Washers provide a smooth bearing surface and are used under the head of a bolt and/or a nut. The chemical,
mechanical, and dimensional requirements for hardened washers are covered under the ASTM specification F436.
These washers are through hardened or carburized to add strength, but are physically smaller than a standard F844
flat washer. They are the recommended washer for any fastener other than a low carbon steel bolt.
Manufacturing
Portland Bolt has the ability to manufacture or provide nonstandard square, rectangular, or round washers meeting
the requirements of ASTM A36, A572 Grade 50, or F436.
Stock
Diameters: 1/2″ – 2-3/4″
Origin: Domestic
Finish: Plain and hot-dip galvanized
Dimensions
B A C Part Numbers
Bolt Size Thickness Weight (lbs.) Per 1000 Pieces Domestic
Outside Diameter Inside Diameter
Min Max Plain Galvanized
1⁄
2 11⁄16 17⁄
32 0.097 0.177 18 16440 16441
5⁄ 15⁄16 11⁄ 0.122 0.177 33 16442 16443
8 16
3
⁄4 115⁄32 13
⁄16 0.122 0.177 41 16444 16445
7⁄ 13⁄4 15⁄ 0.136 0.177 64 16446 16447
8 16