Professional Documents
Culture Documents
This is to certify:
That
Ellwood Crankshaft and Machine Co.
1161 N Sharpsville Ave, Sharon, PA 16146,
USA
is an approved manufacturer of
Steel Forgings
in accordance with
DNV GL rules for classification – Ships
Manufacturer(s) approved by this certificate is/are accepted to deliver according to DNV GL, DNV and GL
rules. Materials to be applied to DNV GL classed object shall fulfill the material requirements in the
applicable DNV GL class rules.
LEGAL DISCLAIMER: Unless otherwise stated in the applicable contract with the holder of this document, or following from mandatory law, the
liability of DNV GL AS, its parent companies and subsidiaries as well as their officers, directors and employees (“DNV GL”) arising from or in
connection with the services rendered for the purpose of the issuance of this document or reliance thereon, whether in contract or in tort
(including negligence), shall be limited to direct losses and under any circumstance be limited to 300,000 USD.
Form code: AM 311 Revision: 2020-01 www.dnvgl.com Page 1 of 2
© DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
Job Id: 263.11-008550-3
Certificate No: AMMM000021S
Revision No: 1
Max. diameter
Steel Forging Max. weight Heat treatment
Grade 3) 4) 5) /section
type method 1) [kg] condition 2)
[mm]
C and 1045
CGF (CD) 50 000 670 QT
C-Mn acc. to ASTM A576
34CrNiMo6
Alloy CGF (CD) 50 000 670 QT
acc. to EN10083
Remarks:
1) CD: Closed die forging; CGF: Continuous Grain Flow forging
2) QT: Quenched and tempered
3) Certification of any material applied to classed object shall fulfill the applicable material
requirements in the DNV GL class rules
4) Steel grades acc. to customer spec. and DNV GL approved drawings
5) Including equivalent grades to other standards