Professional Documents
Culture Documents
Panel
1 2 1 Top Steel-plate
Thickness: Various
Material: Cold rolled steel (SPCC)
2 Bottom Shell
Material: Cold rolled steel (ST14)
Construction: Classic 64-dome design
Stiffening Rib: Cross beams + 4-ribbed
beams
3 Cement Injection
Material: Light weight cement filled
3
Seal: Plastic plug, pink color
Description
RhinoRoc® bare finish panels are manufactured from cold rolled steel
resistance welded, light weight cement-filled steel panels are specifically
designed to accommodate dynamic loads and to withstand some of the
highest ultimate loads in the industry. The design incorporates a classic 64
domes bottom shell with cross-beams and 4-ribbed beams strengthen
center and perimeter of the panel, total 140 resistance welds dramatically
improved edge load capacities, and overall panel durability.
Features
●
Accommodates maximum dynamic loads
to 20.01kN 600/610 mm
●
Interchangeable with other Roc panels
34 mm
●
Quiet, with a solid feel underfoot
●
Powder-coated, protective epoxy finish
CL 600 600mm square Light weight cement-filled Cold rolled steel resistance welded 33.00 mm 37 kg/m²
CL 700 600mm square Light weight cement-filled Cold rolled steel resistance welded 33.50 mm 38 kg/m²
CL 800 600mm square Light weight cement-filled Cold rolled steel resistance welded 33.50 mm 39 kg/m²
ROC 100 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 33.50 mm 42 kg/m²
ROC 200 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 33.50 mm 45 kg/m²
ROC 300 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 34.00 mm 48 kg/m²
ROC 400 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 34.00 mm 51 kg/m²
ROC 500 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 34.00 mm 54 kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 01
Product Ranges
RhinoROC® Bare Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made base
assembly with aluminum die-casted
head pedestal is suitable for raised
floors with a finished floor height
from100mm to 300mm.
Material: Head: Aluminum alloy
Base: Steel, yellow galvanized.
2 Cross Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with a cross ribs for the
1 positioning of panels.
2 Thickness: 2.0mm
4 Adjusting Range
2 +/- 25mm
Performance
●
This cornerlocked understructure system is tested in accordance with USA CISCA
specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Panel
1 2 1 Top Layer
Thickness: Various
Material: Anti-static HPL
Conductive Vinyl (PVC)
2 Bottom Shell
Material: Cold rolled steel (ST14)
Construction: Classic 64-dome design
Stiffening Rib: Cross beams + 4-ribbed
beams
3 Cement Injection
3
Material: Light weight cement filled
Seal: Plastic plug, pink color
Description
RhinoRoc® HPL or PVC finish panel has the same welded structural steel
technology found in the Roc bare finish panel making the two interchange-
able, high-strength but with various finishes are the premier choice for
computer room and data centers.
Features
●
Accommodates maximum dynamic loads
to 20.01kN 600/610mm
●
Interchangeable with other Roc panels
35 mm
●
Quiet, with a solid feel underfoot
●
Powder-coated, protective epoxy finish
●
Wide range of covering options
ROC 100C 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 35.00 mm 45 kg/m²
ROC 200C 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 35.00 mm 48 kg/m²
ROC 300C 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 36.00 mm 51 kg/m²
ROC 400C 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 36.00 mm 53 kg/m²
ROC 500C 600/610mm square Light weight cement-filled Cold rolled steel resistance welded 36.00 mm 55 kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 03
Product Ranges
RhinoROC® Covered C-trim Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from 200mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3 3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 568mm(L) × 21mm(W) ×
Head plate: 75mm × 75mm × 3.0mm
Threaded rod: M19 32mm(H)
1 Thickness: 0.8/1.0/1.2mm
2 Base Assembly
4 Base tube: □22mm × 2.5mm
Base plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This bolted stringer system is tested in accordance with USA CISCA specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
ROC 200C Bolted Stringer Heavy Duty 1,000 lbs 3,000 lbs 350 lbs/ft² 800 lbs 600 lbs 150 lbs
4.45 kN 13.34 kN 17 kN/m² 3.56 kN 2.67 kN 0.67 kN
ROC 300C Bolted Stringer Extra Heavy Duty 1,250 lbs 3,750 lbs 400 lbs/ft² 1,000 lbs 800 lbs 150 lbs
5.56 kN 16.68 kN 19 kN/m² 4.45 kN 3.56 kN 0.67 kN
ROC 400C Bolted Stringer Industrial Duty 1,500 lbs 4,500 lbs 450 lbs/ft² 1,250 lbs 1,000 lbs 150 lbs
6.67 kN 20.02 kN 22 kN/m² 5.56 kN 4.45 kN 0.67 kN
ROC 500C Bolted Stringer Super Heavy Duty 2,000 lbs 6,000 lbs 550 lbs/ft² 1,500 lbs 1,250 lbs 150 lbs
8.90 kN 26.70 kN 26 kN/m² 6.67 kN 5.56 kN 0.67 kN
Panel
1 2 3 1 Top Layer
Thickness: Various
Material: Anti-static HPL
Conductive Vinyl (PVC)
2 Edge Trim
Material: Vinyl plastic
Construction: F - Mini trim
3 Bottom Shell
Material: Cold rolled steel (ST14)
Construction: Classic 64-dome design
4 Stiffening Rib: Cross beams + 4-ribbed
beams
4 Cement Injection
Material: Light weight cement filled
Seal: Plastic plug
Description
RhinoRoc® HPL or PVC finish panel with F-mini trim has the same welded
structural steel technology found in the Roc bare finish panel making the two
interchangeable. The tiny straight trim with excellent squareness is the
premier choice for an office building when client has a special requirement for
HPL or Vinyl floor covering with various colors option.
Features
●
Interchangeable with other Roc panels
●
Quiet, with a solid feel underfoot
600 mm
●
Powder-coated, protective epoxy finish
35 mm
●
Wide range of covering options
ROC 100F 600mm square Light weight cement-filled Cold rolled steel resistance welded 35.00 mm 45 kg/m²
ROC 200F 600mm square Light weight cement-filled Cold rolled steel resistance welded 35.00 mm 48 kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 05
Product Ranges
RhinoROC® Covered F-mini trim Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from 200mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3 3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 568mm(L) × 21mm(W) ×
Head plate: 75mm × 75mm × 3.0mm
Threaded rod: M19 32mm(H)
1 Thickness: 0.8/1.0/1.2mm
2 Base Assembly
4 Base tube: □22mm × 2.5mm
Base plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This bolted stringer system is tested in accordance with USA CISCA specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
ROC 200F Heavy Duty 1,000 lbs 3,000 lbs 350 lbs/ft² 800 lbs 600 lbs 150 lbs
4.45 kN 13.34 kN 17 kN/m² 3.56 kN 2.67 kN 0.67 kN
Panel
1 Airflow Rates
1 4 Rates: 20%, 25%, 30%, 35% and 45%
2 Bottom Structure
Thickness: 2.0 mm
Material: Steel rectangular tube welded
3 Top Steel-plate
Thickness: 2.0 mm
Material: Cold rolled steel sheet
4 Finish
Thickness: Various
Material: Bare, Anti-static HPL,
Conductive Vinyl
2 3
Description
Features
●
All-steel structural design
●
90% recyclable
600 mm
●
Light weight easy install and removal
35 mm
●
Powder-coated, protective epoxy finish
●
Fully interchangeable with other Roc panels
Perf 800 600mm square 2.00 mm Cold rollded steel welded 35.00 mm 28 kg/m²
Perf 1000 600mm square 2.00 mm Cold rollded steel welded 35.00 mm 34 kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 07
Product Ranges
RhinoROC® Airflow Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from 200mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3 3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 568mm(L) × 21mm(W) ×
Head plate: 75mm × 75mm × 3.0mm
Threaded rod: M19 32mm(H)
1 Thickness: 0.8/1.0/1.2mm
2 Base Assembly
4 Base tube: □22mm × 2.5mm
Base plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This bolted stringer system is tested in accordance with USA CISCA specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Perf 1000 Bolted Stringer Heavy Duty 1,000 lbs 3,000 lbs 250 lbs/ft² Not Recommended 550 800
4.45 kN 13.34 kN 12 kN/m²
Panel
2 Edge Band
Thickness: 0.5mm
Material: Conductive PVC/ABS
3 Under Layer
Thickness: 0.3/0.4/0.5mm
Material: Galvanized steel sheet
4 Top Layer
2 3 Thickness: 0.3/0.4/0.5mm
Material: Galvanized steel sheet
Description
RhinoEU® Bare finish panels are manufactured from a high density of calcium
sulphate (approx. 1,650 kg/m³) non-toxic and non-combustible material. The
top and base surfaces of the core are laminated with galvanized steel sheet.
The panel edges are then laminated with an ABS/PVC edge band which
provides protection to the calcium sulphate core.
Features
●
Non-toxic
●
Non-combustible 600 mm
●
Impressive acoustic performance
30 mm
●
Superb underfoot comfort
●
High load capacity
●
Low air leakage rate
EU 1250 600mm square Calcium Sulphate Galvanized steel sheet top 32.00 mm 61.68 Kg/m2
& bottom with edge band
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 09
Product Ranges
RhinoEU® Bare Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3 3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 537mm x 30mm x 20mm
Head plate: Ø90mm × 3.0mm
Head tube: Ø32mm × 2.0mm Thickness: 0.8/1.0/1.2mm
1
2 Base Assembly
4 Base tube: Ø25mm × 2.5mm
Base Plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Panel
2 Edge Band
Thickness: 0.5mm
Material: Conductive PVC/ABS
3 Under Layer
Thickness: 0.3/0.4/0.5mm
Material: Galvanized steel sheet
4 Top Layer
2 3 Thickness: Various
Material: HPL/PVC
Description
Features
●
Non-toxic
●
Non-combustible 600 mm
●
Impressive acoustic performance
30 mm
●
Superb underfoot comfort
●
Low air leakage rate
●
Wide range of covering options
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 11
Product Ranges
RhinoEU® Covered Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3
3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 537mm x 30mm x 20mm
Head plate: Ø90mm × 3.0mm
Head tube: Ø32mm × 2.0mm Thickness: 0.8/1.0/1.2mm
1
2 Base Assembly
4 Base tube: Ø25mm × 2.5mm
Base Plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Panel
1 Top Layer
1 2 Thickness: 0.3 / 0.4 / 0.5 mm
Material: Galvanized steel sheet
2 Edge
Construction: Unique wrapped
around construction
3 3 Under Layer
Thickness: 0.3 / 0.4 / 0.5 mm
Material: Galvanized steel sheet
Description
Features
●
Non-toxic
●
Non-combustible 600 mm
●
Impressive acoustic performance
30 mm
●
Superb underfoot comfort
●
High load capacity
●
Low air leakage rate
EU 800F 600 mm square Calcium Sulphate Galvanized steel full-encapsulated 29.00 mm 56.12 Kg/m2
EU 1000F 600 mm square Calcium Sulphate Galvanized steel full-encapsulated 30.00 mm 58.90 Kg/m2
EU 1250F 600 mm square Calcium Sulphate Galvanized steel full-encapsulated 31.00 mm 61.68 Kg/m2
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 13
Product Ranges
RhinoEU® Encapsulated Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3
3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 537mm x 30mm x 20mm
Head plate: Ø90mm × 3.0mm
Head tube: Ø32mm × 2.0mm Thickness: 0.8/1.0/1.2mm
1
2 Base Assembly
4 Base tube: Ø25mm × 2.5mm
Base Plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Panel
1 Airflow Rates
1 4 Rates: 20%; 25%; 30%; 36%; 45%
2 Bottom Structure
Thickness: 2.0mm
Material: Steel rectangular tube welded
3 Top Layer
Thickness: 2.0mm
Material: Cold rolled steel sheet
4 Finish
Thickness: Various
Material: Bare, Anti-static HPL,
Conductive Vinyl
2 3
Description
Features
●
All-steel structural design
●
90% recyclable 600 mm
●
Light weight easy install and removal
30 mm
●
Powder-coated, protective epoxy finish
●
Fully interchangeable with other EU panels
RSP 800EU 600 mm square 2.00 mm Cold rollded steel welded 32.00 mm 31.07 kg/m2
RSP 1000EU 600 mm square 2.00 mm Cold rollded steel welded 32.00 mm 33.85 kg/m2
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 15
Product Ranges
RhinoEU® Airflow Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm.
Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3
3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
Pedestal 1 Head Assembly
acoustic performance.
Head plate: Ø90mm × 3.0mm
Head tube: Ø32mm × 2.0mm Dimension: 537mm x 30mm x 20mm
1 Thickness: 0.8/1.0/1.2mm
2 Base Assembly
4 Base tube: Ø25mm × 2.5mm
Base Plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Panel
4 1 Fibre Core
Thickness: 30/38mm
1 Material: Chipboard (approx. 680kg/m3)
2 Edge Band
Thickness: 0.5mm
Material: Conductive PVC/ABS
3 Under Layer
Thickness: 0.3/0.4/0.5mm
Material: Galvanized steel sheet
4 Top Layer
Thickness: 0.3/0.4/0.5mm
2 3 Material: Galvanized steel sheet
Description
Features
●
Light weight
●
Good acoustic performance 600 mm
30/38 mm
●
Solid underfoot
●
Low air leakage rate
●
Safe and easy access
●
Excellent lateral stability
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 17
Product Ranges
RhinoFibrecore® Bare Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3
3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 537mm x 30mm x 20mm
Head plate: Ø90mm × 3.0mm
Head tube: Ø32mm × 2.0mm Thickness: 0.8/1.0/1.2mm
1
2 Base Assembly
4 Base tube: Ø25mm × 2.5mm
Base Plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Panel
4 1 Fibre Core
Thickness: 30/38mm
1 Material: Chipboard (approx. 680kg/m³)
2 Edge Band
Thickness: 0.5mm
Material: Conductive PVC/ABS
3 Under Layer
Thickness: 0.3/0.4/0.5mm
Material: Galvanized steel sheet
4 Top Layer
Thickness: Various
2 3 Material: HPL/PVC
Description
Features
●
Wide range of covering options
●
Good acoustic performance 600 mm
Solid underfoot
30/38 mm
●
Low air leakage rate
●
Safe and easy access
●
Excellent lateral stability
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 19
Product Ranges
RhinoFibrecore® Covered Strive for perfection!
System
1 Standard Pedestal
Electro-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3 3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 537mm x 30mm x 20mm
Head plate: Ø90mm × 3.0mm
Head tube: Ø32mm × 2.0mm Thickness: 0.8/1.0/1.2mm
1
2 Base Assembly
4 Base tube: Ø25mm × 2.5mm
Base Plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Panel
2 Top layer
Thickness: Various
Material: HPL/ESD vinyl (PVC)
Description
RhinoAlutec® aluminum solid panels are specifically designed for the areas
inside clean rooms where extremely heavy equipments are installed. The
unique lattice structure of Rhino’s solid panel allows for excellent weight
dispersion. Non-ferrous, precision-machined and lightweight, these panels
offer ease-of-handling and a tight, precise fit.
Features
●
Anti-corrosion and anti-magnetic
●
Impressive acoustic performance
●
Superb underfoot comfort
●
Light weight and high loading capacity
●
Low air leakage rate
●
Wide range of covering options
ALS 1000 600mm square Aluminum Alloy Precision-machined top with various finish 50/55 mm 33.85 Kg/m²
ALS 1250 600mm square Aluminum Alloy Precision-machined top with various finish 50/55 mm 36.63 Kg/m²
ALS 1500 600mm square Aluminum Alloy Precision-machined top with various finish 50/55 mm 39.41 Kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 21
Product Ranges
RhinoAlutec® Solid Strive for perfection!
System
1 Standard Pedestal
Hot-dip galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm.
Material: Steel, Hot-dip galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 3.5 mm
3 Stringer
Steel tube performed stringer provide
1 2 3
best supports to the structural system
with limited air leakage and outstanding
acoustic performance.
Dimension: 543mm x 25mm x 25mm
Thickness: 0.8/1.0/1.2mm
Pedestal 1 Head Assembly
Head plate: 90mm × 90mm × 3.0mm
Threaded rod: M18
1 2 Base Assembly
Base tube: Ø25mm × 2.5mm
4 Base Plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2
+/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
ALS 1250 Extra Heavy Duty 5.56 kN N/A 14.83 kN/m² 16.68 kN
Panel
1 Airflow Rates
1 3 Rates: 17% - 25%
3 Top Layer
Thickness: Various
Material: HPL/ESD vinyl (PVC)
Description
Features
●
Anti-corrosion and anti-magnetic
●
Impressive acoustic performance
●
Superb underfoot comfort
●
Light weight and high load capacity
●
Wide range of covering options
●
17% - 25% airflow rates
ALP 1000 600mm square Aluminum Alloy Precision-machined with perforated 50/55 mm 31.07 Kg/m²
and various finish on top
Precision-machined with perforated
ALP 1250 600mm square Aluminum Alloy and various finish on top 50/55 mm 33.85 Kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 23
Product Ranges
RhinoAlutec® Perforated Strive for perfection!
System
1 Standard Pedestal
Hot-dip galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm.
Material: Steel, Hot-dip galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 3.5 mm
3 Stringer
1 2 3 Steel tube performed stringer provide
best supports to the structural system
with limited air leakage and outstanding
acoustic performance.
Dimension: 543mm x 25mm x 25mm
Thickness: 0.8/1.0/1.2mm
Pedestal 1 Head Assembly
Head plate: 90mm × 90mm × 3.0mm
Threaded rod: M18
1 2 Base Assembly
Base tube: Ø25mm × 2.5mm
4 Base Plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2
+/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
ALP 1250 Extra Heavy Duty 5.56 kN N/A 14.83 kN/m² 16.68 kN
Panel
1 Airflow Rates
1 Rates: 50%
Description
Features
●
Non-toxic and non-combustible
●
Anti-corrosion and anti-magnetic
●
Superb underfoot comfort
●
Light weight and high load capacity
●
55% airflow rates
●
Adaptable for both EU and Roc system
ALG 1000 600mm square Aluminum Alloy Aluminum Die-casted 50/55 mm 33.85 Kg/m²
ALG 1250 600mm square Aluminum Alloy Aluminum Die-casted 50/55 mm 36.63 Kg/m²
ALG 1500 600mm square Aluminum Alloy Aluminum Die-casted 50/55 mm 39.41 Kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 25
Product Ranges
RhinoAlutec® Grating Strive for perfection!
System
1 Standard Pedestal
Hot-dip galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from100mm to
600mm.
Material: Steel, Hot-dip galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 3.5 mm
3 Stringer
1 2 3 Steel tube performed stringer provide
best supports to the structural system
with limited air leakage and outstanding
acoustic performance.
Dimension: 543mm × 25mm × 25mm
Thickness: 0.8/1.0/1.2mm
4 Adjusting Range
2
+/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
ALG 1250 Extra Heavy Duty 5.56 kN N/A 14.83 kN/m² 16.68 kN
Panel
1 Airflow Rates
1 Rates: 55%
Description
Features
●
Non-toxic and non-combustible
●
Anti-corrosion and anti-magnetic
●
Superb underfoot comfort
●
Light weight and high load capacity
●
55% airflow rates
●
Adaptable for both EU and Roc system
ALC 1000 600mm square Aluminum Alloy Aluminum Die-casted 50/55 mm 31.07 Kg/m²
ALC 1250 600mm square Aluminum Alloy Aluminum Die-casted 50/55 mm 33.85 Kg/m²
ALC 1500 600mm square Aluminum Alloy Aluminum Die-casted 50/55 mm 36.63 Kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 27
Product Ranges
RhinoAlutec® Circular Strive for perfection!
System
1 Standard Pedestal
Electra-galvanized steel made pedestal
is suitable for raised floors with a
finished floor height from 200mm to
600mm. Zinc whisker free is available
for special order.
Material: Steel, Yellow Galvanized.
2 Head Gasket
Plastic conductive material with sound
proofing and sealing functions,
equipped with tabs for the positioning
of panels.
Thickness: 2.0mm
1 2 3
3 Stringer
Steel tube performed stringer with
plastic gasket on top provide best
supports to the structural system with
limited air leakage and outstanding
acoustic performance.
Pedestal 1 Head Assembly
Dimension: 568mm(L) × 21mm(W) ×
Head plate: 75mm × 75mm × 3.0mm
Threaded rod: M18 32mm(H)
1 Thickness: 0.8/1.0/1.2mm
2 Base Assembly
4 Base tube: □22mm × 2.5mm
Base plate: 100mm × 100mm × 2.5mm
4 Adjusting Range
2 +/- 30mm
Performance
●
This rigid grid system is tested in accordance with PSA MOB PS/SPU specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
ALC 1250 Extra Heavy Duty 5.56 kN N/A 14.83 kN/m² 16.68 kN
Panel
1 1 All-steel Plate
A triangle design high quality galvanized
steel made floor tiles interlock
with supports without screws or adhesives.
Material: High quality galvanized steel
Thickness: 1.5/2.0mm
Description
Features
●
Easy to assemble and remove
●
Quiet, with a solid feel underfoot
●
Galvanized steel for 100% rust corrosion protection
●
100% recyclable and eco-friendly
CS 501 21x21mm 11.00 mm Galvanized steel converted triangle 1.50 mm 18.60 kg/m²
CS 502 21x21mm 11.00 mm Galvanized steel converted triangle 2.00 mm 23.88 kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 29
Product Ranges
RhinoCross® Triangle Strive for perfection!
System
1 1 Supports
A column designed plastic supports
equipped with grooves overhead interlock
with tiles for a tight fit.
Material: Vinyl plastic
Height: 40mm to 60mm
Performance
●
This low-profile access floor system is tested in accordance with PSA MOB PS/SPU
specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 2 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Panel
1 2 3 1 Top Steel-plate
Thickness: Various
Material: Cold rolled steel (SPCC)
2 Bottom Shell
Material: Cold rolled steel (ST14)
Construction: Classic 36-dome design
3 Cement Injection
Material: Light weight cement filled
Seal: Plastic
4 Pedestal Support
Design: Pre-insert
Material: Plastic
Description
Features
●
Low-profile height adjustable 35-100mm
●
Quick connect channel system 500 mm
●
Organized channels for high volume cable
25 mm
management
●
Save time and expense for facility
re-configurations
●
Eliminate electrified furnishings, save costs
on moves or changes, improved esthetics
CL 501 500mm square Light weight cement-filled Cold rolled steel resistance welded 25.00 mm 35.19 kg/m²
CL 502 500mm square Light weight cement-filled Cold rolled steel resistance welded 26.00 mm 36.58 kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 31
Product Ranges
RhinoCross® Channel Strive for perfection!
System
1 Pedestal
Electra-galvanized steel made bolt
pedestal is suitable for raised floors with a
7 3 2 5 finished floor height from 35mm to
100mm.
2 Channel Plate
2.0mm thick high quality steel made and
powder coat epoxy finish with 5 ribs
providing outstanding load bearing
capacity.
3 Corner Plate
2.0mm thick high quality steel made and
powder coat epoxy finish with 4 ribs
around and a cross ribs at the center
providing outstanding load bearing
6 4 1 capacity.
4 Soleplate
0.5mm thick high quality galvanized steel
made with 4 round holes at the corner for
pedestal location.
5 Cable Tray
Pedestal 1 Fixing Nut 0.5mm thick high quality galvanized steel
H = 20mm made groove design for cable
management.
1
2 Adjusting Nut Connector
6
M12 0.3mm thick high quality galvanized steel
4
made right-angle design protected
3 Bolt Stud pedestals during cable management.
3 H = 35mm to 100mm
7 Perimeter Cover Plate
2.0mm thick high quality steel made and
4 Adjusting Range powder coat epoxy finish.
2
+/- 10mm
Performance
●
This low-profile channel system is tested in accordance with PSA MOB PS/SPU
specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Panel
2 1 Top Steel-plate
1 4
Thickness: Various
Material: Cold rolled steel (SPCC)
2 Bottom Shell
Material: Cold rolled steel (ST14)
Construction: Classic 36-dome design
Stiffening Rib: Cross beams
3 Unifix
Construction: Press-formed for Unifix®
screw
4 Cement Injection
3 Material: Light weight cement filled
Seal: Plastic
Description
RhinoCross® Unifix bare finish panel was manufactured from cold rolled steel
resistance weld, light weight cement infill panels are specifically designed to
accommodate 500mm x 500mm carpet tiles for general office’s application.
Pre-formed outlet holes saved a lot of time on cutting panels for cable outlet
at site. The Unifix design maximized system’s stability and widely used in
Japan market where earthquakes are frequent.
Features
●
Unique Unifix® design
●
500mm small span better load bearing
capacity 500 mm
●
Quiet, with a solid feel underfoot
28 mm
●
Powder-coated, protective epoxy finish
UX 501 500mm square Light weight cement-filled Cold rolled steel resistance welded 28.00 mm 41.05 kg/m²
UX 502 500mm square Light weight cement-filled Cold rolled steel resistance welded 29.00 mm 45.05 kg/m²
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 33
Product Ranges
RhinoCross® Unifix Strive for perfection!
System
1 Floor Panel
Steel cement infill panel with powder coat
4 3 2 epoxy finish.
5
3 Corner-locking Screws
M6 fastener
4 Pedestal
Electra-galvanized steel made bolt
pedestal is suitable for raised floors with a
1 finished floor height from 65mm to
150mm.
5 Unifix® Screw
M6 fastener with rubber around
Performance
●
This corner-locked system is tested in accordance with PSA MOB PS/SPU
specification.
●
Panel deflection at centre edge must not exceed 2.5mm
●
Performance to a safety factor of 3 x static load
●
Structural performance based upon a full Rhino access floors system i.e. panels
& pedestals.
Concentrated Load
Panel Type Panel Grade Point Load Load Over Uniformly Distribution Load Ultmiate Load
25mm × 25mm square 300mm × 300mm square
Description
RhinoDalton® is a leading manufacturer of high quality, durable business carpets and carpet
tiles for commercial applications such as offices, banks, retail units, public buildings, schools,
universities and health care centers. Rhino’s Dalton modular carpet tiles are designed to stay on
the raised access floors with no up-curl, tapping or ripping. Our square tiles are easier to
handle, install and maintain.
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 35
Product Ranges
RhinoDalton® Nylon Carpet Strive for perfection!
Specifications
Chicago I Colorline
Specifications
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 37
Product Ranges
RhinoDalton® Nylon Carpet Strive for perfection!
Chicago II Colorline
Specifications
Dream Colorline
Specifications
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 39
Product Ranges
RhinoDalton® Nylon Carpet Strive for perfection!
Specifications
Tide Colorline
307N-345 307N-346
Specifications
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 41
Product Ranges
RhinoUC® PP Carpet Strive for perfection!
Description
RhinoUC® modular carpet tiles are designed to stay on the floor with no upcurl, tapping or
rippling. Our square tiles are easier to handle, install and maintain. They install with just 3-4%
waste and as little as 2% compared to an average 15% for traditional roll carpet. It has been
widely used for commercial applications such as offices, banks, retail units, public buildings,
schools and health care centers. Rhino is committed to delivering superior carpet tiles in terms
of quality, durability and designs through our continuous innovation.
UC-AA Colorline
Specifications
UC-AB Colorline
Specifications
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 43
Product Ranges
RhinoUC® PP Carpet Strive for perfection!
UC-AC Colorline
Specifications
UC-AD Colorline
Specifications
UC-AE Colorline
Specifications
UC-AF Colorline
Specifications
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 45
Product Ranges
RhinoUC® PP Carpet Strive for perfection!
UC-AG Colorline
Specifications
UC-AH Colorline
Specifications
UC-AI Colorline
Specifications
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 47
Product Ranges
RhinoMeiah® HPL Strive for perfection!
Description
Performance
●
Special anti-static properties
●
Excellent resistance to wear and tear
●
Excellent resistance to scratching
●
Excellent resistance to impact
●
Excellent resistance to damp and static load resistance
●
Excellent resistance to high temperatures, including those of cigarette burns
●
Excellent reaction to fire with low fume-generation
●
Particular resistance to chemical products and cleaning agents, including organic solvents
●
Easy to clean and maintenance
●
Good dimensional stability
Rhino Meiah®
Specification Test Standard
Anti-static High Pressure Laminate
No of Color 12
Dimensional Stability EN 434 /FED STD NO. 501a, M 6211 < 0.25%
ASTM F 540: Square Tolerance (<0.51mm / 305mm) < 0.51mm / 305mm
Static Load Limit ASTM F 970 3,000 lbs/square inch; Long term
ELECTRICAL Electrical Resistance DIN 51953 / EN 1081 Anti-static 109 < R < 1012
FEATURES ASTM F 150 / ESD F 7.1 / UL 779 Anti-static 1.0×109 ~ 1.0×1012
Critical Radiant Flux ASTM E 648 / NFPA 253 Class 1 (1.08 w/cm²)
Flame Spread ASTM E 162 / ASTM E 84 / NFPA 225 NFPA Class B / UBC Class II (<75)
CHEMICAL Chemical Resistance EN 423 / DIN 51958 Excellent; Test Report available on request
RESISTANCE ASTM D 543 / ASTM F 925 Excellent; Test Report available on request
Recyclable Yes
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 49
Product Ranges
RhinoBluetec® PVC Strive for perfection!
Description
Performance
●
Excellent electrical resistance
●
Excellent fire resistance
●
Excellent chemical resistance
●
Excellent resistance to wear and tear
●
Excellent resistance to scratching
●
Excellent resistance to impact
●
Excellent resistance to damp and static load resistance
●
Easy to clean and maintenance
●
Good dimensional stability
Rhino Bluetec®
Specification Test Standard
Homogeneous ESD Vinyl
FIRE Critical Radiant Flux ASTM E 648 / NFPA 253 Class 1 (1.08w/cm²)
RESISTANCE Flame Spread ASTM E 162 / ASTM E 84 / NFPA 225 NFPA Class B / UBC Class II (<75)
Smoke Density ASTM E 662 / NFPA 258 Passed (<450Dme)
Thermal Conductivity DIN 52612 / NFX 10021 0.309 w/m.k
Underfloor Heating DIN 52612 Suitable - Max 30℃
ASTM F 1514 (△E < 8 ave, max) < △E = 8.0
CHEMICAL Chemical Resistance EN 423 / DIN 51958 Excellent; Test Report available on request
RESISTANCE ASTM D 543 / ASTM F 925 Excellent; Test Report available on request
Slip Resistance Wet DIN 51130 / BGR181 (ZH1 / 571) R9
SLIP ADA Requirements > 0.6
RESISTANCE prEN 13893 0.89μ
Slip Resistance Dry EN 13893 > 0.3
Color Fastness EN 20105-B 02 >6
LIGHT
ISO 105 B 02, Met. 3 - DIN53389 7
RESISTANCE
Resistance to Light ASTM F 1515 (△E<8 ave, max) < △E = 8.0
Impact Sound Reduction ISO 717 / 2 4 dB
Sound Absorption ISO 140-8 / ISO 717 3 dB
OTHER Water Absorption ASTM D 570 0.03% water weight gain
PROPERTIES Ease of Decontamination DIN 25415-1 / ISO 8690 Excellent
Recyclable Yes
Formulation No Carbon contamination
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 51
Product Ranges
Floor Box Strive for perfection!
Description
Rhino stainless steel floor box is a cable management system designed
specifically for the distribution of power, voice and data service to meet the
requirements of raised access flooring environments. The system is
economical, relocatable, easily installed and highly flexible thus providing
good solution to meet every requirement demand by building owners,
architects and consultants involving in providing a highly efficient and easily
managed system for both new buildings and buildings under refurbishing.
Features
The Rhino access floor boxes, incorporating the advantages of the latest in access floor box design, are manufactured
within a BS. 5750 quality environment to meet the PSA specification for raised access floors MOB-08-801.
●
Stainless steel lid, shine and beautiful, anti-corrosion and rust free.
●
Straight edges to butt join with flooring.
●
Stainless steel hinged cover (4mm thick) with 10mm deep rebate for floor covering infill.
●
2 x cord outlet flaps fold down when in use to allow cords to exit with main cover closed.
●
Steel box body has knockouts in each side accept both 20mm and 25mm diameter flexible conduits.
●
Unique design of access floor locking device.
●
75mm overall depth of box from top of access floor allows installation in most situations.
RFB-130
The RFB-130 features a stainless steel cover. This model has
Cover size: beveled edges to allow the cover to conceal the cut edge of
130mm × 130mm the carpet or flooring below. The solid stainless steel cover is
Body size: useful for installations where the flooring material is not suitable
112mm × 112mm for use in rebated cover. One cord outlet port folds into the box
Access floor open size: to allow cables to exit when in use.
117mm × 117mm
RFB-230
The RFB-230 features a stainless steel cover. This model has
Cover size: beveled edges to allow the cover to conceal the cut edge of
230mm × 130mm the carpet or flooring below. The solid stainless steel cover is
Body size: useful for installations where the flooring material is not suitable
210mm × 110mm for use in rebated cover. Two cord outlet ports fold into the box
Access floor open size: to allow cables to exit when in use.
215mm × 115mm
RFB-250
The RFB-250 Floor Box features a solid, 4mm thick stainless
Cover size: steel lid. This box has straight edges to allow the stainless
250mm × 220mm steel lid to butt join the flooring. Suitable for use with polished
Body size: timber flooring, carpet tiles, stone and vinyl floor coverings.
The 10mm deep rebate allows floor covering to be inserted
230mm × 200mm
into the lid. Two wide cable exit ports fold down when in use to
Access floor open size:
allow cables to exit the floor box. When not in sue the cable
235mm × 205mm exit ports finish flush with the level of the cover.
RFG-137
The RFG-137 floor access grommet made of durable ABS
Cover size: plastic, designed specifically for grommets to enable floor
Ø137mm access for runs from below. Available in two distinguished
hues of black and white, the grommet is smooth and will
Body size:
incorporate easily with any flooring Installation will be quick
Ø125mm
with the small hole-cut size Grommet remains low profile,
Access floor open size: regardless of its placement Rotating lid prevents heels or items
Ø127mm from snagging or falling through the hole itself.
Description
AirSeal® Round
RAG-140
Together the brushes and rubber gasket work in tandem to
Cover size: hold cables in the center of the cutout while limiting the
Ø145mm passage of contaminants under the floor. The dual stage
Body size: sealing system provides a superior seal to prevent airflow
Ø100mm bypass, reduce energy consumption, and aid in the implemen-
Access floor open size: tation of hot/cold aisle containment or floor configurations.
Ø105mm
AirSeal® Square
RAG-175
The RAG-175 is a square design of heavy duty air seal
Cover size: grommet for raised floor cutouts prior to installation of
175mm × 175mm communications or power cabling. ABS polycarbonate
Body size: material made provides a finished look on all raised floor
134mm × 134mm panels. Solid construction and the textured surface compli-
Access floor open size: ment all floor coverings.
135mm × 135mm
AirSeal® Retangular
RAG-280
The RAG-280 rectangular designed to accommodate either
Cover size: single cables or large bundles of cables through the same
280mm × 210mm opening, providing flexibility for future wiring needs. ABS
Body size: polycarbonate material made provides a finished look on all
235mm × 165mm raised floor panels. Solid construction and the textured surface
Access floor open size: compliment all floor coverings.
237mm × 167mm
AirSeal® Ultra
RAG-320
The RAG-320 Ultra designed to accommodate large bundles
Cover size: of cables through the same opening, providing flexibility for
320mm × 270mm future wiring needs. ABS polycarbonate material made
Body size: provides a finished look on all raised floor panels. Solid
265mm × 227mm construction and the textured surface compliment all floor
Access floor open size: coverings.
270mm × 230mm
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 53
Product Ranges
Panel Lifter Strive for perfection!
Description
Single Cup
PL-101
This model features a sleek, strong steel
Details: handle. Simply squeeze the lever handles
together to create a strong continuous hold,
●
125mm diameter vacuum suction cup and separate them to break the seal. This is
●
100mm height a nifty, compact design that offers a
●
Recommended lifting capacity is 15kgs surprising strong hold. This model is different
from the double cup model in that it is only
for lifting a floor tile momentarily and not for
carrying a floor tile.
Dual Cup
PL-102
This model features a sleek, strong
Details: aluminum handle. The vacuum created by
double cups allows easy lifting of heavy
●
110mm diameter vacuum suction cup weights. Simply place your lifter onto the
●
250mm length floor tile and press down, forcing out the air
●
140mm height underneath the vacuum cups, and you will
●
Recommended lifting capacity is 30kgs create a powerful vacuum hold. The suction
is broken when the fingertip-operated bar is
lifted.
Triple Cup
PL-103
This model features a sleek, strong
Details: aluminum handle with a contoured underside
for a sure grip. Simply press the levers down
●
110mm diameter vacuum suction cup to create a strong continuous hold. Lift up
●
100mm height on the levers to break the suction. You will
●
Recommended lifting capacity is 50kgs be astonished with its holding power.
Pedestal
1 Support head
1 The head, with diameter of 150 mm and
surface area of 177 cm² can be fitted with
various accessories to cater for different
2 applications
3 2 Adjusting ring
The adjustment ring allows for easy
fine-tuning of the height of the pedestal
even with a load placed on top and also it
locks the pedestal at required height.
4 3 Couplers
The Rhino coupler is used to extend the
height over 150mm. Two integrated tabs
on either side allow for mechanical fixation
(cross-wire bracing) where needed.
4 Base
Base diameter 200mm, surface area
Pedestal with spacer tabs Pedestal with terrace joist 314cm² The base can be simply positioned
or fixed to any substrate where needed.
The head, coupler and the base are
equipped with a safety inter-locking system.
Description
●
Pavers: natural stone, concrete tiles, ceramic tiles etc… ●
Terraces
●
Timber decking: natural wood, wooden decking, WPC composite decking etc… ●
Balconies
●
Glass or polycarbonate ●
Pool decks
●
Gratings: metal, aluminum, FRP ●
Water features
PMD-MINI PMD00 PMD01 PMD02 PMD03 PHD00 PHD01 PHD02 PHD03 PHD04-09
46-70MM 105-135MM 220-355MM 295-460MM 370-560MM 100-190MM 190-330MM 290-470MM 380-600MM 470-1360MM
We reserve the right to change specification or design and supply products which may differ from those
described and illustrated without notice and without liability. © 2018 Rhino Access Floors, Ltd. 2 55
Product Ranges
Rhino iPed® Strive for perfection!
System
PMD00 Medium Duty 105-135mm 2930 kg 2630 kg 2310 kg 3530 kg 3280 kg 2990 kg
PMD01 Medium Duty 220-355mm 1900 kg 1790 kg 1600 kg 2500 kg 2520 kg 2220 kg
PMD02 Medium Duty 295-460mm 1690 kg 1450 kg 1290 kg 2310 kg 2190 kg 1840 kg
PMD03 Medium Duty 370-560mm 1580 kg 1340 kg 1210 kg 2130 kg 1970 kg 1640 kg
PHD01 Heavy Duty 190-330mm 3070 kg 1910 kg 1580 kg 3990 kg 2460 kg 2100 kg
PHD02 Heavy Duty 290-470mm 2960 kg 2030 kg 1530 kg 3890 kg 2410 kg 2040 kg
PHD03 Heavy Duty 380-600mm 2920 kg 1970 kg 1500 kg 3820 kg 2370 kg 1980 kg
PHD04-09 Heavy Duty 470-1360mm 2890 kg 1900 kg 1470 kg 3780 kg 2320 kg 1940 kg