Professional Documents
Culture Documents
vlan 99
name mgtVLAN
int g0/1
switchport mode access
switchport access vlan 99
hostname
banner motd
line console 0
line vty 0 4 - first configuration for TELNET or SSH
enable secret
service password-enryption
ena
config t
hostname BunzelSW
banner motd $Warning!!! Access to this device is strictly prohibited and is
punishable to the full extent of the Law!!!$
service password-encryption
line con 0
password cisco
login
line vty 0 4
password cisco
login
transport input telnet
exit
enable secret cisco
int fa0/1
switchport mode access
switchport port-security
switchport port-security maximum 1
switchport port-security mac-address 000D.BD9B.C08D
switchport port-security violation shut
Creating VLAN
1. Plan out your design
VLAN virtual LAN
2. Identify the ports to where you setup your VLAN
individual port
group ports
3. Plan your VLAN ID
VLAN 10
4. Plan your vLAN name
Name LB470, or name DCIS-Office
5. Transfer each port to the created VLAN
Tenetting
1. telnet should be activated in the initial configuration
via line vty 0 4
2. assign an IP Address to a switch via SVI
interface vlan 1
3. ping the IP Address first
4. telnet then the target ip address
telnet 192.168.10.2
Structured Cabling