Professional Documents
Culture Documents
Lcode Intro
Lcode Intro
VCDS use:
When LCode is started within VCDS, the Long Coding is automatically inserted from
VCDS.
The right information text is also loaded from a LBL or XPL file.
Use [Arrow Down/Up] to search for the item(s) you want to change or check.
Add or remove a marker with left mouse to change the current Coding.
After the first change is made, there is a menu [Back to standard] available,
If you want to go back to original Coding.
After there is made a change in Coding, the current Coding is in Windows buffer.
So when you close LCode, the new Coding is copied in the second line of VCDS.
----------------------------------------------------------------------------------
----------------------------------------------------------------------------------
http://de.openobd.org/audi/a6_4f.htm#46
----------------------------------------------------------------------------------
Some tips:
If Multibyte Pull-down is pressed just to observe the possible options,
choose the active option again, then the focus is back on the actual byte.
You can force "Short Code" by adding a "+" at the start or end, e.g.: +3993 or
0393969+
You can change a decimal number to hex by addaing a "h" at the end, e.g.: 00065493h
You can change a hex number to decimal by addaing a "d" at the end, e.g.: 0000FFD5d
Then press key "Arrow down" on the keyboard.
Press "Insert" to copy binary data from current long coding to windows buffer.
----------------------------------------------------------------------------------
In exchange for this freeware program, please send your 00 Auto-Scan values to me:
Fill in form at:
http://www.netech.dk/index.php/send-ecu-data
----------------------------------------------------------------------------------
18 Apr. 2011