Professional Documents
Culture Documents
Revision: 11/04/2020
Current Date: 8/27/2021
HEATBRAKE 508-G
Revision: 11/04/2020 CHARACTERISTICS
Fast Curing Fast Setting
Medium Weight Silica
DESCRIPTION
Thermbond Refractories use the patented Unifrax Binder System™ for easy and
accurate mixing, controlled setting, fast dry-out and heat up, thermal shock
resistance and other unique properties. Thermbond chemically bonds to existing
fired refractories.
PACKAGING
Bag Weight: 14.97 kg Unit Weight: 20.41 kg Liquid Component: Heatbrake Series Activator
Yield / Unit: 0.012 m3 Units / Ton: 48.98 metric Bags Per Pallet: 72
Drums Per Dry Pallet: 2 (plus predampen 1 jug to Jug Weight: 3.63 kg Drum Weight: 181.44 kg
3 bags)*
SPECIFICATIONS
Maximum Recommended Service Temp Bulk Density
Hot Face 1537.78 C As Placed 1634 kg/m3
After 1500F (816C) 1313 kg/m3
**Test data shown are based on averages subject to normal variation on individual tests, and therefore should not be assumed to be maximum or minimum specifications.
***Application by alternative method may produce somewhat different results.
Measures are approximate and may vary. For mixing partial units, contact your Thermbond Rep for specific wet-to-dry ratios. See Installation Guide for more detailed
information.
To assure you are getting the latest data, see our online data sheets at https://www.thermbond.com/technical-data/
Due to the unique nature of the Thermbond binder system, test procedures vary slightly from ASTM.
Documentation of these variations is available upon request.
Thermbond is a registered trademark of Unifrax. All rights reserved.