Professional Documents
Culture Documents
Engineer’s Tools
Prices exclude VAT and carriage Prices/specification subject to change without prior notice. E&OE all sales are subject to our terms and conditions (available on request)
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 1
GLOST ER TOOLIN G
How to Order
Shipping
Payment
UK
Cheque payable to “Gloster Tooling Supplies Limited”
Or PayPal to
Worldwide
PayPal to
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 2
Horizontal Milling Attachment
Tooling Trolley
Universal
Semi-Universal Dividing Head
Dividing Head
Tooling Trolley
R8 ER collet chucks
R8-ER11 collet chuck without wrench £45.00
R8-ER16 collet chuck without wrench £33.95
R8-ER20 collet chuck without wrench £38.95
R8-ER25 collet chuck without wrench £33.95
R8-ER32 collet chuck without wrench £38.95
R8-ER40 collet chuck without wrench £40.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 4
R8 Sidelock End Mill Holders
R8 x 6mm Sidelock end mill holder £12.75 R8 x 1/4” Sidelock end mill holder £12.75
R8 x 8mm Sidelock end mill holder £12.75
R8 x 10mm Sidelock end mill holder £15.25 R8 x 3/8” Sidelock end mill holder £15.25
R8 x 12mm Sidelock end mill holder £15.25 R8 x 1/2” Sidelock end mill holder £15.25
R8 x 16mm Sidelock end mill holder £16.95 R8 x 5/8” Sidelock end mill holder £16.95
R8 x 20mm Sidelock end mill holder £16.95 R8 x 3/4” Sidelock end mill holder £16.95
R8 x 25mm Sidelock end mill holder £28.00 R8 x 1” Sidelock end mill holder £28.00
R8 x 32mm Sidelock end mill holder £28.00 R8 x 1.1/4” Sidelock end mill holder £28.00
All R8 tooling is 7/16x20UNF draw thread if you require M12 draw thread please call
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 5
Vertex R8 Automatic Universal Boring and Facing Head
R8 Universal Boring and Facing Head POA
5-250mm, fine feed graduation 0.01, +/- 15mm offset, accepts 18mm tools,
adjustable automatic radial feed and overload protection
All R8 tooling is 7/16x20UNF draw thread if you require M12 draw thread please call
One head with various shanks will allow use of same head on
different machine spindles
Insert
Set Bars D1 F L L1 Insert Key
screw
B10 C06 12mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
12mm-4 B12 T11 12mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
B16 T11 12mm 8mm 105mm 35mm TCMT110204 M2.5x6 T8
R100 C06 12mm 13mm 72mm 50mm CCMT060204 M2.5x6 T8
F10 C06 18mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
F12 T11 18mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
18mm-5 F16 T11 18mm 8mm 105mm 35mm TCMT110204 M2.5x7 T8
F20 T11 18mm 10mm 135mm 35mm TCMT110204 M2.5x8 T8
R120 C09 18mm 19mm 123mm 88mm CCMT09T304 M4x10 T15
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 6
Fly Cutter with R8 Shank
R8 2.1/2” fly cutter £25.00
Pack (3) 5/16” square x4” M42 HSSCO8 toolbits to suit £10.50
All R8 tooling is 7/16x20UNF draw thread if you require M12 draw thread please call
R8 Collet Stand
R8 Collet Stand Metal 48 hole approximately 40x31x21cm £17.95
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 7
Gloster Easy Change Tooling
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 8
INT (ISO) ER collet chucks
30INT-ER16 collet chuck without wrench £42.50 50INT-ER32 collet chuck without wrench £59.75
30INT-ER32 collet chuck without wrench £42.50 50INT-ER40 collet chuck without wrench £65.50
30INT-ER40 collet chuck without wrench £52.50
40INT-ER16 collet chuck without wrench £49.80
40INT-ER25 collet chuck without wrench £49.80
40INT-ER32 collet chuck without wrench £49.80
40INT-ER40 collet chuck without wrench £52.50
For collets and wrenches see collet and wrench section
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 9
INT (ISO) Boring Head Shanks
30INT 1.1/2”x 18 Boring Head Shank £22.00
40INT 1.1/2”x 18 Boring Head Shank £23.00
50INT 1.1/2”x 18 Boring Head Shank £31.00
One head with various shanks will allow use of same head on
different machine spindles
Insert
Set Bars D1 F L L1 Insert Key
screw
B10 C06 12mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
12mm-4 B12 T11 12mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
B16 T11 12mm 8mm 105mm 35mm TCMT110204 M2.5x6 T8
R100 C06 12mm 13mm 72mm 50mm CCMT060204 M2.5x6 T8
F10 C06 18mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
F12 T11 18mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
18mm-5 F16 T11 18mm 8mm 105mm 35mm TCMT110204 M2.5x7 T8
F20 T11 18mm 10mm 135mm 35mm TCMT110204 M2.5x8 T8
R120 C09 18mm 19mm 123mm 88mm CCMT09T304 M4x10 T15
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 10
Vertex INT (ISO) Automatic Universal Boring and Facing Head
30INT Universal Boring and Facing Head POA
40INT Universal Boring and Facing Head POA
50INT Universal Boring and Facing Head POA
5-250mm, fine feed graduation 0.01, +/- 15mm offset, accepts 18mm tools,
adjustable automatic radial feed and overload protection
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 11
INT (ISO) Sidelock End Mill Holders
30INT-6,8,10,12,16,20mm POA
30INT-25mm £32.00 30INT-1” £32.00
30INT-32mm £32.00 30INT-1.1/4” £32.00
40INT-6,8,10,12,16,20mm POA
40INT-25mm £30.00 40INT-1” £35.00
40INT-32mm £30.00 40INT-1.1/4” £35.00
50INT-16,20mm £43.00
50INT-25mm £45.00 50INT-1” £45.00
50INT-32mm £48.00 50INT-1.1/4” £48.00
See our Weldon Shank Q/C tap chucks and adapters
INT (ISO) Autolock Type Collet Chucks for screwed shank cut-
ters
30INT Autolock type collet chuck with 6,10,12&16mm collets £140.00
40INT Autolock type collet chuck with 6,10,12&16mm collets £145.00
6,10,12&16mm collets £17.95
1/4,3/8,1/2&5/8” collets £17.95
Spindle Wipers
Helps keep damaging grit and dirt out of expensive machine spindle sockets
to prolong machine and tool life.
30INT £11.80
40INT £12.90
50INT £15.50
Full range of quick change tooling available with QC30 and QC40 shank...please call
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 12
40INT Long Milling Arbor Style B
40INT x1”x14” shoulder to nut with bearing bush and spacers £111.95
40INT x1”x20” shoulder to nut with bearing bush and spacers £125.95
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 13
All DIN2080 tooling is M16 draw bar thread and fitted with plastic bumper ring
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 14
All DIN2080 tooling is M16 draw bar thread and fitted with plastic bumper ring
Spindle Wipers
Helps keep damaging grit and dirt out of expensive machine spindle sockets
to prolong machine and tool life.
SK40 £12.90
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 15
All DIN2080 tooling is M16 draw bar thread and fitted with plastic bumper ring
One head with various shanks will allow use of same head on
different machine spindles
Insert
Set Bars D1 F L L1 Insert Key
screw
B10 C06 12mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
12mm-4 B12 T11 12mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
B16 T11 12mm 8mm 105mm 35mm TCMT110204 M2.5x6 T8
R100 C06 12mm 13mm 72mm 50mm CCMT060204 M2.5x6 T8
F10 C06 18mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
F12 T11 18mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
18mm-5 F16 T11 18mm 8mm 105mm 35mm TCMT110204 M2.5x7 T8
F20 T11 18mm 10mm 135mm 35mm TCMT110204 M2.5x8 T8
R120 C09 18mm 19mm 123mm 88mm CCMT09T304 M4x10 T15
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 16
QC ER collet chucks
QC30-ER16 collet chuck without wrench QC30-ER16-040M £48.50
QC30-ER20 collet chuck without wrench QC30-ER20-040M £52.50
QC30-ER25 collet chuck without wrench QC30-ER25-040M £52.50
QC30-ER32 collet chuck without wrench QC30-ER32-060M £48.50
QC30-ER40 collet chuck without wrench QC30-ER40-100M £58.50
Spindle Wipers
Helps keep damaging grit and dirt out of expensive machine spindle sockets
to prolong machine and tool life.
QC30 £11.80
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 17
QC Boring Head Shanks
QC30 1.1/2”x 18 Boring Head Shank QC30-CBI1500-025M £58.00
QC40 1.1/2”x 18 Boring Head Shank POA
One head with various shanks will allow use of same head on
different machine spindles
Insert
Set Bars D1 F L L1 Insert Key
screw
B10 C06 12mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
12mm-4 B12 T11 12mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
B16 T11 12mm 8mm 105mm 35mm TCMT110204 M2.5x6 T8
R100 C06 12mm 13mm 72mm 50mm CCMT060204 M2.5x6 T8
F10 C06 18mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
F12 T11 18mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
18mm-5 F16 T11 18mm 8mm 105mm 35mm TCMT110204 M2.5x7 T8
F20 T11 18mm 10mm 135mm 35mm TCMT110204 M2.5x8 T8
R120 C09 18mm 19mm 123mm 88mm CCMT09T304 M4x10 T15
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 18
QC30 Lock nut hook wrench
QC30 68-72mm hook wrench £9.95
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 19
SK40 tooling with Deckel S20x2 thread ...Prices on application
Spindle Wipers
Helps keep damaging grit and dirt out of expensive machine spindle sockets
to prolong machine and tool life.
SK 40 Deckel £12.90
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 20
Runout < 0.005mm Premium Balanced G2.5 25,000 RPM
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 22
BT ER collet chucks Maximum 6,000 RPM
BT40-ER16 collet chuck without wrench £18.00
BT40-ER25 collet chuck without wrench £18.00
BT40-ER32 collet chuck without wrench £18.00
BT40-ER40 collet chuck without wrench £18.00
BT ER collet chucks
BT30-ER16 collet chuck without wrench £24.00*
BT30-ER32 collet chuck without wrench £24.00*
BT40-ER32 collet chuck without wrench £19.80*
BT40-ER40 collet chuck without wrench £19.80*
BT50-ER32 collet chuck without wrench £50.00*
BT50-ER40 collet chuck without wrench £50.00*
BT40-B16-32 £29.00*
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 23
BT40 Q/C tap chucks with tension and compression
BT40 size 1 (19mm) £104.00
BT40 size 2 (31mm) £142.00
Pull Studs
BT30-MAS403 45° £5.00
BT40-MAS403 45° £2.75
with coolant hole, can be used in machines with or without through coolant.
Full range of pull studs available including BT ISO DIN JIS HAAS MAZAK CINCINNATI
Spindle Wipers
Helps keep damaging grit and dirt out of expensive machine spindle sockets
to prolong machine and tool life.
BT30 £11.80
BT40 £12.90
BT50 £15.50
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 24
BT Boring Head Shank
BT30 1.1/2”x 18 Boring Head Shank £37.00
BT40 1.1/2”x 18 Boring Head Shank £39.00
BT50 1.1/2”x 18 Boring Head Shank £54.00
One head with various shanks will allow use of same head on
different machine spindles
Insert
Set Bars D1 F L L1 Insert Key
screw
B10 C06 12mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
12mm-4 B12 T11 12mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
B16 T11 12mm 8mm 105mm 35mm TCMT110204 M2.5x6 T8
R100 C06 12mm 13mm 72mm 50mm CCMT060204 M2.5x6 T8
F10 C06 18mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
F12 T11 18mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
18mm-5 F16 T11 18mm 8mm 105mm 35mm TCMT110204 M2.5x7 T8
F20 T11 18mm 10mm 135mm 35mm TCMT110204 M2.5x8 T8
R120 C09 18mm 19mm 123mm 88mm CCMT09T304 M4x10 T15
5-250mm, fine feed graduation 0.01, +/- 15mm offset, accepts 18mm tools,
adjustable automatic radial feed and overload protection
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 25
OTT Drawbar Adapter
Facilitates using BT40 toolholders in machines with SK40 spindle
40-M16 £9.30
40-5/8”x11 £9.30
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 26
*Balanced G6,3 12,000RPM
DIN 69871
One head with various shanks will allow use of same head on
different machine spindles
Insert
Set Bars D1 F L L1 Insert Key
screw
B10 C06 12mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
12mm-4 B12 T11 12mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
B16 T11 12mm 8mm 105mm 35mm TCMT110204 M2.5x6 T8
R100 C06 12mm 13mm 72mm 50mm CCMT060204 M2.5x6 T8
F10 C06 18mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
F12 T11 18mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
18mm-5 F16 T11 18mm 8mm 105mm 35mm TCMT110204 M2.5x7 T8
F20 T11 18mm 10mm 135mm 35mm TCMT110204 M2.5x8 T8
R120 C09 18mm 19mm 123mm 88mm CCMT09T304 M4x10 T15
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 27
*Balanced G6,3 12,000RPM
Spindle Wipers
Helps keep damaging grit and dirt out of expensive machine spindle sockets
to prolong machine and tool life.
DV30 £11.80
DV40 £12.90
DV50 £15.50
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 28
Full range of German manufactured DV40 shank spindle tooling
available ...price on application
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 29
HSK A63 and A100 DIN 69893 Shank tooling ...price on application
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 30
Morse Taper ER collet chucks
1MT-ER11 collet chuck without wrench £32.95 3MT-ER11 collet chuck without wrench £38.75
1MT-ER16 collet chuck without wrench £34.95 3MT-ER16 collet chuck without wrench £34.75
1MT-ER20 collet chuck without wrench £32.95 3MT-ER20 collet chuck without wrench £38.75
1MT-ER25 collet chuck without wrench £34.95 3MT-ER25 collet chuck without wrench £34.75
2MT-ER11 collet chuck without wrench £36.00 3MT-ER32 collet chuck without wrench £38.25
2MT-ER16 collet chuck without wrench £36.00 3MT-ER40 collet chuck without wrench £38.25
2MT-ER20 collet chuck without wrench £36.00 4MT-ER32 collet chuck without wrench £45.50
2MT-ER25 collet chuck without wrench £44.00 4MT-ER40 collet chuck without wrench £45.50
2MT-ER32 collet chuck without wrench £38.25
For collets and wrenches see collet and wrench section
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 31
Morse Taper Boring Head Shanks
2 M/T 1.1/2”x 18 Boring Head Shank £14.50
3 M/T 1.1/2”x 18 Boring Head Shank £19.50
4 M/T 1.1/2”x 18 Boring Head Shank £23.00
One head with various shanks will allow use of same head on
different machine spindles
Insert
Set Bars D1 F L L1 Insert Key
screw
B10 C06 12mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
12mm-4 B12 T11 12mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
B16 T11 12mm 8mm 105mm 35mm TCMT110204 M2.5x6 T8
R100 C06 12mm 13mm 72mm 50mm CCMT060204 M2.5x6 T8
F10 C06 18mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
F12 T11 18mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
18mm-5 F16 T11 18mm 8mm 105mm 35mm TCMT110204 M2.5x7 T8
F20 T11 18mm 10mm 135mm 35mm TCMT110204 M2.5x8 T8
R120 C09 18mm 19mm 123mm 88mm CCMT09T304 M4x10 T15
5-250mm, fine feed graduation 0.01, +/- 15mm offset, accepts 18mm tools,
adjustable automatic radial feed and overload protection
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 32
Morse Taper Shell Mill Arbors
2 M/T x 13mm shell mill arbor £22.95
2 M/T x 16mm shell mill arbor £20.95
2 M/T x 22mm shell mill arbor £21.95
3 M/T x 16mm shell mill arbor £22.95
3 M/T x 22mm shell mill arbor £23.95 3 M/T x 3/4” shell mill arbor £21.95
3 M/T x 27mm shell mill arbor £24.95
3 M/T x 32mm shell mill arbor £26.95
3 M/T x 40mm shell mill arbor £27.95
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 33
Morse Taper Autolock Type Collet Chucks
for screwed shank cutters
2 M/T Autolock type collet chuck with 6,10,12&16mm collets £135.00
3 M/T Autolock type collet chuck with 6,10,12&16mm collets £135.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 34
Morse Taper Solid Lathe Centres Carbide Tipped
1 M/T Full £5.95 1 M/T Half £5.45
2 M/T Full £7.45 2 M/T Half £6.95
3 M/T Full £9.95 3 M/T Half £9.45
4 M/T Full £14.00 4 M/T Half £13.50
5 M/T Full £25.00 5 M/T Half £24.50
Spindle Wipers
Helps keep damaging grit and dirt out of expensive machine spindle sockets
to prolong machine and tool life.
1 M/T £8.50
2M/T £8.80
3M/T £10.70
4M/T £12.90
5M/T £15.90
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 35
Straight Shank ER collet chucks
ER16 or ER25 5/8Ø x2.1/2” £37.95
ER32 40mmØ x100mm £49.00
ER40 60mmØ x89mm £56.00
Straight Shank mini ER extension collet chucks Fitted with mini nut
ER11 12mmØ x160 £29.00
ER16 16mmØ x160 £29.00
ER16 20mmØ x160 £29.00
ER20 20mmØ x160 £29.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 36
Straight Shank Boring Head Shanks
20mm 1.1/2”x 18 Boring Head Shank £ 23.00
25mm 1.1/2”x 18 Boring Head Shank £ 25.00
One head with various shanks will allow use of same head on
different machine spindles
Insert
Set Bars D1 F L L1 Insert Key
screw
B10 C06 12mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
12mm-4 B12 T11 12mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
B16 T11 12mm 8mm 105mm 35mm TCMT110204 M2.5x6 T8
R100 C06 12mm 13mm 72mm 50mm CCMT060204 M2.5x6 T8
F10 C06 18mm 5mm 85mm 35mm CCMT060204 M2.5x5 T8
F12 T11 18mm 6mm 95mm 35mm TCMT110204 M2.5x6 T8
18mm-5 F16 T11 18mm 8mm 105mm 35mm TCMT110204 M2.5x7 T8
F20 T11 18mm 10mm 135mm 35mm TCMT110204 M2.5x8 T8
R120 C09 18mm 19mm 123mm 88mm CCMT09T304 M4x10 T15
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 37
Straight Shank Turret (Capstan Lathe) Sockets
3/4” x 1 Morse Taper £8.50 1” x 1 Morse Taper £8.00
1” x 2 Morse Taper £8.50 1.1/4” x 1 Morse Taper £8.75
1.1/4” x 2 Morse Taper £9.75 1.1/4” x 3 Morse Taper £10.75
1.1/2” x 1 Morse Taper £10.75 1.1/2” x 2 Morse Taper £11.75
1.1/2” x 3 Morse Taper £12.75 1.1/2” x 4 Morse Taper £13.75
1.3/4” x 2 Morse Taper £14.75 1.3/4” x 3 Morse Taper £15.75
1.3/4” x 4 Morse Taper £16.75 2” x 2 Morse Taper £18.00
2” x 3 Morse Taper £20.00 2” x 4 Morse Taper £22.00
2.1/8” x 2 Morse Taper £22.50 2.1/8” x 3 Morse Taper £24.50
2.1/8” x 4 Morse Taper £26.50
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 38
Insert collet into nut, rotate slightly to engage in the eccentric
extractor ring, only then mount collet and nut in chuck.
Size D mm L mm Range mm Price each Set Range mm Pieces in Set Set Price
Aluminium
Case
ER11 11.5 18 0.5-7 £5.50 0.5-7 13 £56.00
Description Price
ER16 Wiper £12.50
ER25 Wiper £9.50
ER32 Wiper £10.50
ER40 Wiper £10.50
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 40
DIN6388A 401E Collets
Description Price
EOC8A 3,3.5(1/8”),4,5,6,6.5(1/4”) & 8mm £8.00
EOC8A 1,1.5,2,2.5(3/32”) & 10mm £10.00
D=14.5mm, L=26mm
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 41
HDC 3 Jaw Self Centering Cast Iron Lathe Chuck Plain Recess
Mount with 1 set of each hard inside and outside jaws
80mm 3 jaw chuck 2100-CI-080 £54.41
100mm 3 jaw chuck 2100-CI-100 £67.65
125mm 3 jaw chuck 2100-CI-125 £75.88
160mm 3 jaw chuck 2100-CI-160 £95.64
200mm 3 jaw chuck 2100-CI-200 £141.76
250mm 3 jaw chuck 2100-CI-250 £201.17
We also supply the full range of Bison chucks formerly supplied by Toolmex Polmach
DIN6350
HDC 3 Jaw Self Centering Cast Iron Lathe Chuck With Integral
HDC Jaws and Spares are interchangeable with Bison Lathe Chucks
Camlock Mount with 1 set of each hard inside and outside jaws
125mm D1-4 camlock 3 jaw chuck 2300-CI-125-D1-4 £141.51
160mm D1-4 camlock 3 jaw chuck 2300-CI-160-D1-4 £175.47
200mm D1-4 camlock 3 jaw chuck 2300-CI-200-D1-4 £250.27
200mm D1-6 camlock 3 jaw chuck 2300-CI-200-D1-6 £250.27
250mm D1-8 camlock 3 jaw chuck 2300-CI-250-D1-8 £375.76
DIN55029
DIN55029
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 42
Set of 3 Scroll Soft Jaws for 2100,2200,2300 Lathe Chuck
80mm 3 jaw chuck £21.55
100mm 3 jaw chuck £22.96
125mm 3 jaw chuck £27.34
160mm 3 jaw chuck £31.96
200mm 3 jaw chuck £37.75
250mm 3 jaw chuck £48.16
315mm 3 jaw chuck £67.91
HDC Jaws and Spares are interchangeable with Bison Lathe Chucks
80mm 3 jaw chuck £31.96
100mm 3 jaw chuck £36.67
125mm 3 jaw chuck £44.01
160mm 3 jaw chuck £46.72
200mm 3 jaw chuck £62.48
250mm 3 jaw chuck £79.22
315mm 3 jaw chuck £100.68
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 43
Gloster 4 Jaw independent Lathe Chuck Plain Recess Mount
with 1 set of each hard reversible jaws
80mm 4 jaw chuck £51.00
100mm 4 jaw chuck £56.00
125mm 4 jaw chuck £71.00
160mm 4 jaw chuck £85.00
200mm 4 jaw chuck £125.00
We also supply the full range of Bison chucks formerly supplied by Toolmex Polmach
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 44
Plain Cast Backplates Require machining to suit both lathe and chuck
125mm £38.50
160mm £46.00
200mm £79.00
We also supply the full range of Pratt Burnerd and other leading chucks and jaws
set of Scroll Soft Jaws for Chinese 3 Jaw Self Centering Lathe Chuck
80mm 3 jaw chuck £27.69
100mm 3 jaw chuck POA
125mm 3 jaw chuck £32.79
160mm 3 jaw chuck POA
200mm 3 jaw chuck £46.40
250mm 3 jaw chuck £61.39
set of Soft Top Jaws for Chinese 3 Jaw Self Centering Lathe Chuck
300mm 3 jaw chuck POA
Please check that these jaws fit your chuck before ordering
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 45
Keyless Drill Chuck
Keyless chuck 1/32-1/2 J6 £20.00
Keyless chuck 1/8-5/8 J3 £23.10
1/2-9/16” £13.60
9/16-21/32” £14.40
21/32-3/4” £17.90
3/4-7/8” £18.70
7/8-1” £21.90
*1-1.1/4” £40.60
*1.1/4-1.1/2” £42.60
*1.1/2-2” £62.00
*2-2.3/4” £202.00
*2.3/4-3.3/4” £238.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 46
Gloster 5C Ultra Precision Collets Hardened and ground Hardinge type collets
Guaranteed Size, Guaranteed Accuracy 0.005mm-0.008mm
5CRU-24M set of (24) 3-26mm x1.0mm £384.00
5CRU-30M Set of (30) 1-30mm x1.0mm £484.00
5CRU-59M Set of (59) 1-30mm x0.5mm £1006.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 47
Gloster 5C Ultra Precision Collets Hardened and ground Hardinge type collets
Guaranteed Size, Guaranteed Accuracy 0.005mm-0.008mm
5CRU-69I Set of (69) 1/16-1.1/8 x1/16” £1166.00
All other metric, imperial and intermediate sizes POA
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 48
Gloster 5C Ultra Precision Collets Hardened and ground Hardinge type collets
Guaranteed Size, Guaranteed Accuracy 0.005mm-0.008mm
All other metric, imperial and intermediate sizes POA
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 50
5C Round Collets Hardened and ground Hardinge type collets
Accuracy 0.013mm
See Ultra
5CRI0-764 7/64” precision 5CRI0-2132 21/32” £5.55
See Ultra
5CRI0-18 1/8” £5.55 5CRI0-4364 43/64” precision
See Ultra
5CRI0-964 9/64” precision 5CRI0-1116 11/16” £5.55
See Ultra
5CRI0-532 5/32” £5.55 5CRI0-4564 45/64” precision
See Ultra
5CRI0-1164 11/64” precision 5CRI0-2332 23/32” £5.55
See Ultra
5CRI0-316 3/16” £5.55 5CRI0-4764 47/64” precision
See Ultra
5CRI0-1364 13/64” precision 5CRI0-34 3/4” £5.55
See Ultra
5CRI0-732 7/32” £5.55 5CRI0-4964 49/64” precision
See Ultra
5CRI0-1764 17/64” precision 5CRI0-1316 13/16” £5.55
See Ultra
5CRI0-932 9/32” £5.55 5CRI0-5364 53/64” precision
See Ultra
5CRI0-2164 21/64” precision 5CRI0-78 7/8” £5.55
See Ultra
5CRI0-1132 11/32” £5.55 5CRI0-5764 57/64” precision
See Ultra
5CRI0-2364 23/64” precision 5CRI0-2932 29/32” £5.55
See Ultra
5CRI0-38 3/8” £5.55 5CRI0-5964 59/64” precision
See Ultra
5CRI0-2964 29/64” precision 5CRI1-0 1” £5.55
5CRI0-1532 15/32” £5.55 5CRI1-164 1-1/64” £5.95
See Ultra
5CRI0-3164 31/64” precision 5CRI1-132 1-1/32” £5.55
5CRI0-12 1/2” £5.55 5CRI1-364 1-3/64” £5.95
See Ultra
5CRI0-3364 33/64” precision 5CRI1-116 1-1/16” £5.55
5CRI0-1732 17/32” £5.55 5CRI1-564 1-5/64” £5.95
See Ultra
5CRI0-3564 35/64” precision 5CRI1-332 1-3/32” £5.55
5CRI0-916 9/16” £5.55 5CRI1-764 1-7/64” £5.95
See Ultra
5CRI0-3764 37/64” precision 5CRI1-18 1-1/8” £5.55
5CRI0-1932 19/32” £5.55
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 51
5C Hexagon Collets Hardened and ground Hardinge type collets
Accuracy 0.013mm
5C Emergency Collets
Brass £18.95
Steel £5.80
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 52
5C Square Collets Hardened and ground Hardinge type collets
Accuracy 0.013mm
5C Expanding Collets Hardened and ground Hardinge type collets with soft
heads that can be machined to size
.250”-.463”x1” £19.50
.437”-.800”x1” £19.50
.750”-1.437”x1” £19.50
.750”-1.935”x1” £19.50
5C-4E Set (4) .250”-1.935”x1 £70.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 53
5C Collet Stands
5C Collet Stand Metal 30 hole approximately 30x24x14cm £14.95
5C Collet Stand Metal 72 hole approximately 46x39x21cm £26.95
5C Collet Stops
5C Collet Stop £5.20
5C Universal Collet Stop £9.50
5C Collet Chuck
5C collet chuck for lathes, mills or grinders, plain recess mount.
5C 3 Jaw Chuck
80mm 3 jaw chuck with 5C shank
Supplied with one set Hard inside and one set hard outside jaws £81.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 54
5C Horizontal and vertical Lever Operated Collet Fixture
5C-HVL Horizontal and vertical Collet Fixture type C £54.00
5C Collet wrench
5C collet wrench £14.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 55
Gloster 16C Ultra Precision Collets Hardened and ground Hardinge type collets
Guaranteed Size, Guaranteed Accuracy 0.005mm-0.008mm
All other metric, imperial and intermediate sizes POA
16CR-40M Set of 40 3-42mm x1.0mm £1,995.00
16CR-79M Set of 79 3-42mm x0.5mm £3,768.00
16C Hexagon and Square Collets £71.00
These collets are manufactured with a 48.00mm back bearing diameter with g6 tolerance (-0.01/-0.025mm), due to the chuck bore tolerance set by some 16C chuck manufacturers, the bore of
some NEW chucks may need to be polished out.
In addition to the products above we can also supply the full range of “original” Hardinge tooling
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 56
Gloster 16C Ultra Precision Collets Hardened and ground Hardinge type collets
Guaranteed Size, Guaranteed Accuracy 0.005mm-0.008mm
5C collet adapters
16C to 5C £185.00
2J to 5C £185.00
These collets are manufactured with a 48.00mm back bearing diameter with g6 tolerance (-0.01/-0.025mm), due to the chuck bore tolerance set by some 16C chuck manufacturers, the bore of
some NEW chucks may need to be polished out.
In addition to the products above we can also supply the full range of “original” Hardinge tooling
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 57
Gloster Multibore / Varibore Type Wide Range Collets
DIN6343 4-12mm collets are smooth bore, 14mm+ have spiral serrations,
14mm+ with smooth bores available on request.
Heavy duty super grip serrations also available.
Gloster Multibore / Varibore Type Wide Range Collet system overcomes many of the limitations imposed by
conventional spring collets. The Wide Range Collet will always maintain a parallel and even grip over its
entire bore length, regardless of bar or material variations in size. This greatly reduces the inventory of
collets required to cover a variety of workpiece sizes. Components must occupy at least 67% of the collet
bore length.
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 58
Gloster F15 DIN6343 120E Ultra Precision D1 = 21mm
Dead LengthSpring Collets D2 = 15mm
Guaranteed Accuracy 0.005mm-0.008mm L = 64mm
Intermediate sizes POA
120E Hexagon and Square Collets £25.00
Stock collets <8mm with plain bore >8mm with radial grooves
For collets >8mm with plain bore please call
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 59
Gloster F25 DIN6343 145E Ultra Precision D1 = 35mm
Dead LengthSpring Collets D2 = 25mm
Guaranteed Accuracy 0.005mm-0.008mm L = 77mm
Intermediate sizes POA
145E Hexagon and Square Collets £32.00
Stock collets <8mm with plain bore >8mm with radial grooves
For collets >8mm with plain bore please call
145E steel emergency collet 2mm bore £27.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 60
Gloster F37 DIN6343 1536E Ultra Precision
Dead LengthSpring Collets
Guaranteed Accuracy 0.005mm-0.008mm
Intermediate sizes POA
D1 = 47mm 1536E Hexagon and Square Collets PTO
D2 = 37mm
L = 92mm
Part No. Diameter Price Part No. Diameter Price
1536ERM030 2mm £30.00 1536ERM310 31mm £30.00
1536ERM030 3mm £30.00 1536ERM320 32mm £30.00
1536ERM040 4mm £30.00
1536ERM050 5mm £30.00 1536ERI018 1/8” £30.00
1536ERM060 6mm £30.00 1536ERI0316 3/16” £30.00
1536ERM070 7mm £30.00 1536ERI014 1/4” £30.00
1536ERM080 8mm £30.00 1536ERI0516 5/16” £30.00
1536ERM090 9mm £30.00 1536ERI038 3/8” £30.00
1536ERM100 10mm £30.00 1536ERI0716 7/16 £30.00
1536ERM120 12mm £30.00 1536ERI012 1/2” £30.00
1536ERM130 13mm £30.00 1536ERI058 5/8” £30.00
1536ERM140 14mm £30.00 1536ERI034 3/4” £30.00
1536ERM150 15mm £30.00 1536ERI078 7/8” £30.00
1536ERM160 16mm £30.00 1536ERI100 1” £30.00
1536ERM165 16.5mm £33.00 1536ERI118 1.1/8” £30.00
1536ERM170 17mm £30.00 1536ERI114 1.1/4” £30.00
1536ERM180 18mm £30.00
1536ERM190 19mm £30.00
1536ERM200 20mm £30.00 Please Call For
1536ERM205 20.5mm £33.00 Other Intermediate Sizes
1536ERM210 21mm £30.00
1536ERM220 22mm £30.00
1536ERM230 23mm £30.00
1536ERM240 24mm £30.00
1536ERM250 25mm £30.00
1536ERM260 26mm £30.00
1536ERM265 26.5mm £33.00
1536ERM270 27mm £30.00
1536ERM280 28mm £30.00
1536ERM290 29mm £30.00
1536ERM300 30mm £30.00
Stock collets <8mm with plain bore >8mm with radial grooves
For collets >8mm with plain bore please call
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 61
Gloster F37 DIN6343 1536E Ultra Precision
Dead LengthSpring Collets
Guaranteed Accuracy 0.005mm-0.008mm
Intermediate sizes POA
D1 = 47mm 1536E Hexagon and Square Collets £47.00
D2 = 37mm
L = 92mm
Part No. Hexagon Price Part No. Square Price
1536EHM080 8mm £47.00
1536EHM100 10mm £47.00
1536EHM120 12mm £47.00
1536EHM130 13mm £47.00
1536EHM150 15mm £47.00
1536EHM160 16mm £47.00
1536EHM170 17mm £47.00
1536EHM180 18mm £47.00
1536EHM190 19mm £47.00
1536EHM200 20mm £47.00
1536EHM210 21mm £47.00
1536EHM220 22mm £47.00
1536EHM240 24mm £47.00
1536EHM250 25mm £47.00
1536EHM260 26mm £47.00
1536EHM270 27mm £47.00
Stock hexagon and square collets <13mm with plain bore >13mm with radial grooves
For collets >13mm with plain bore please call
1536E steel emergency collet 3mm bore £37.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 62
Gloster F48 DIN6343 173E B42 Ultra Precision D1 = 60mm
Dead LengthSpring Collets D2 = 48mm
Guaranteed Accuracy 0.005mm-0.008mm L = 94mm
Intermediate sizes POA
173E Hexagon and Square Collets £58.00
Stock collets <8mm with plain bore >8mm with radial grooves
For collets >8mm with plain bore please call
173E steel emergency collet 3mm bore £47.00
173E steel emergency collet 3mm bore 1” extended nose £57.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 63
Gloster F48 DIN6343 173E B42 Ultra Precision D1 = 60mm
Dead LengthSpring Collets D2 = 48mm
Guaranteed Accuracy 0.005mm-0.008mm L = 94mm
Intermediate sizes POA
173E Hexagon and Square Collets £58.00
Stock collets <8mm with plain bore >8mm with radial grooves
For collets >8mm with plain bore please call
173E steel emergency collet 3mm bore £47.00
173E steel emergency collet 3mm bore 1” extended nose £57.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 64
Accu-Lock Milling Machine Vice
Every pound of horizontal force produces half a pound of downward force to eliminate jaw tilt.
100mm jaw width, 32mm jaw depth, 100mm opening vice with swivel base £85.00
Shipping Dimensions 38x25x18cm, shipping weight 14Kg
160mm jaw width, 45mm jaw depth, 135mm opening vice with swivel base £129.00
Shipping Dimensions 49x32x23cm, shipping weight 32Kg
160mm jaw width, 45mm jaw depth, 200mm opening vice with swivel base £133.00
Shipping Dimensions 50x32x23cm, shipping weight 34Kg
152mm jaw width, 52mm jaw depth, 320mm opening vice £395.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 65
Precision Toolmakers Vice
Square and parallel to 0.005mm/0.0002”, hardened and ground slide for consistent accuracy,
58-62HRC. Clamping slots for easy fixing.
2” vice 50mm jaw width, 25mm jaw depth, 65mm opening, 155mm base £48.00
3” vice 73mm jaw width, 35mm jaw depth, 100mm opening, 210mm base £75.00
75mm jaw width, 20mm jaw depth, 50mm opening vice £12.95
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 66
Precision Parallel Set
Consists 10 matched pairs H&G parallels 1/8” thick 6” long Parallelism 0.0002”
Includes 1/2,5/8,3/4,7/8,1,1.1/8,1.1/4,1.3/8,1.1/2 and 1.5/8” wide
Inspection Parallels
matched pairs H&G parallels Parallelism 0.0002”
3/4x1x9” £30.00
1x1.1/4x12” £50.00
1.1/4x1.1/2x12” £55.50
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 67
58 Piece Clamping Kits
Sets consists:
6 tee nuts
6 flange nuts
4 coupling nuts
12 step blocks
6 clamps
24 studs, 4 each 3”,4”,5”,6”,7”,8”
Supplied in a heavy duty rack.
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 68
To suit kit CK-8mm CK-3/8” CK-10mm CK-7/16” CK-12mm CK-1/2” CK-14mm CK-5/8” CK-16mm CK-18mm
M6 5/16UNC M8 3/8UNC M10 3/8UNC M12 1/2UNC M14 M16
Pack thread thread thread thread thread thread thread thread thread thread
Contents
£7.50 £6.50 £6.50 £7.00 £7.00 £7.00 £7.50 £7.50 £8.00 £8.50
6 Tee Nuts
£7.50 £6.50 £6.50 £7.00 £7.00 £7.00 £7.50 £7.50 £8.00 £8.50
6 Flange Nuts
4 Coupling Nuts
4 3” Studs
4 4” Studs
4 5” Studs
4 6” Studs
4 7” Studs
4 8” Studs
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 69
Tee Bolts
C=Table A=Thread B=Length Pack Price
Slot Width Quantity
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 70
ISO1 DIN4971 Tungsten Carbide Brazed Tip Lathe Tools...Bar Turning
ISO2 DIN4972 Tungsten Carbide Brazed Tip Lathe Tools...Cranked Turning and Facing
ISO2 DIN4972 Tungsten Carbide Brazed Tip Lathe Tools...Cranked Turning and Facing
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 72
TRE Tungsten Carbide Brazed Tip Round Boring Tools
*These toolholders hold the insert to use the two edges that are not used (and quite often
thrown away) when held in SCLCR/L or SCDCR/L style toolholders, effectively halving insert
costs.
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 73
Toolholders for DCMT Indexable Inserts
SDJCR1010E07 Toolholder £14.47
SDJCR1212F07 Toolholder £14.47
SDJCR1616H07 Toolholder £16.85
SDNCN1010E07 Toolholder £14.47
SDNCN1212F07 Toolholder £14.47
S10K-SDUCR07 Boring Bar £18.92
S12M-SDUCR07 Boring Bar £18.92
S16M-SDUCR07 Boring Bar £23.50
Spares available
Parting Toolholders
GNCIH26-2 Blade with ejector key £23.95
GNCIH26-3 Blade with ejector key £18.95
GNCIH32-3 Blade with ejector key £18.95
GTBN16-26 Toolblock £29.00
GTBN20-26 Toolblock £29.00
GTBN20-32 Toolblock £29.00
GTBN25-32 Toolblock £29.00
Toolblocks will accept other manufacturers blades including Iscar, Sandvik and Seco etc.
Blades will fit other manufacturers blocks and blades and toolholders will also accept other
manufacturers GTN3 style inserts
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 74
Threading Toolholders
SER1616H16 Toolholder £26.00
SER2020K16 Toolholder £28.00
SER2525M16 Toolholder £31.00
SER2525M22 Toolholder £31.00
SER3232P22 Toolholder £40.00
Part No. Grade Price Price per 3 Price per 10 Part No. Grade Price Price per 3 Price per 10
each Any mix Any mix each Any mix Any mix
16ER0.50ISO GTX30 £5.50 £14.40 £45.00 11IR0.750ISO GTX30 £5.50 £14.40 £45.00
16ER0.75ISO GTX30 £5.50 £14.40 £45.00 11IR1.00ISO GTX30 £5.50 £14.40 £45.00
16ER1.00ISO GTX30 £5.50 £14.40 £45.00 11IR1.25ISO GTX30 £5.50 £14.40 £45.00
16ER1.25ISO GTX30 £5.50 £14.40 £45.00 11IR1.50ISO GTX30 £5.50 £14.40 £45.00
16ER1.50ISO GTX30 £5.50 £14.40 £45.00 16IR0.50ISO GTX30 £5.50 £14.40 £45.00
16ER1.75ISO GTX30 £5.50 £14.40 £45.00 16IR0.75ISO GTX30 £5.50 £14.40 £45.00
16ER2.00ISO GTX30 £5.50 £14.40 £45.00 16IR1.00ISO GTX30 £5.50 £14.40 £45.00
16ER2.50ISO GTX30 £5.50 £14.40 £45.00 16IR1.25ISO GTX30 £5.50 £14.40 £45.00
16ER3.00ISO GTX30 £5.50 £14.40 £45.00 16IR1.50ISO GTX30 £5.50 £14.40 £45.00
22ER3.50ISO GTX30 £8.00 £21.00 £65.00 16IR1.75ISO GTX30 £5.50 £14.40 £45.00
22ER4.00ISO GTX30 £8.00 £21.00 £65.00 16IR2.00ISO GTX30 £5.50 £14.40 £45.00
22ER4.50ISO GTX30 £8.00 £21.00 £65.00 16IR2.50ISO GTX30 £5.50 £14.40 £45.00
22ER5.00ISO GTX30 £8.00 £21.00 £65.00 16IR3.00ISO GTX30 £5.50 £14.40 £45.00
16ER11W GTX30 £5.50 £14.40 £45.00 22IR3.50ISO GTX30 £8.00 £21.00 £65.00
16ER14W GTX30 £5.50 £14.40 £45.00 22IR4.00ISO GTX30 £8.00 £21.00 £65.00
16ER19W GTX30 £5.50 £14.40 £45.00 22IR4.50ISO GTX30 £8.00 £21.00 £65.00
16ERAG60 GTX30 £5.50 £14.40 £45.00 22IR5.00ISO GTX30 £8.00 £21.00 £65.00
16IR11W GTX30 £5.50 £14.40 £45.00
Threading Inserts
All other pitches and grades POA
Internal and External Threading Kits POA
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 75
CCGT K10 micro grain turning inserts with ground and highly
polished finish for aluminium, non-ferrous metal and plastics
CCGT060202AL-GT K10 £2.30
CCGT060204AL-GT K10 £2.30
CCGT09T304AL-GT K10 £2.75
CCGT09T308AL-GT K10 £2.75
Micro grain tungsten carbide for high wear resistance, high polish finish gives excellent chip control, large rake angle and
sharp edge reduces cutting force
DCGT K10 micro grain turning inserts with ground and highly
polished finish for aluminium, non-ferrous metal and plastics
DCGT070202AL-GT K10 £2.60
DCGT070204AL-GT K10 £2.60
DCGT11T304AL-GT K10 £2.75
DCGT11T308AL-GT K10 £2.75
Micro grain tungsten carbide for high wear resistance, high polish finish gives excellent chip control, large rake angle and
sharp edge reduces cutting force
VCGT K10 micro grain turning inserts with ground and highly
polished finish for aluminium, non-ferrous metal and plastics
VCGT110302AL-GT K10 £2.60
VCGT110304AL-GT K10 £2.60
VCGT110308AL-GT K10 £2.60
VCGT160402AL-GT K10 £3.85
VCGT160404AL-GT K10 £3.85
Micro grain tungsten carbide for high wear resistance, high polish finish gives excellent chip control, large rake angle and
sharp edge reduces cutting force
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 76
Mini Quick Change Toolpost (suit 7x10, 7x12 and 7x14 lathes)
Consists tool post, mounting hardware, 2 turning toolholders, boring tool holder and parting
off blade holder, block 1.25/32”” wide x 1.1/2” high, 2.11/16” total height £42.00
Spare QC tool holder Type 1 turning and facing 1/2” (12mm) £8.95
Spare QC tool holder Type 4 boring 3/8” (9.5mm) £11.95
Spare QC tool holder Type 7 parting 1/2” (12.7mm) £11.95
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 77
VDI 16,20,30,40 and 50 DIN 69880 Shank tooling
price on application
Part No. OD Bore Fig. L1 L2 Price Part No. OD Bore Fig. L1 L2 Price
GTS.2506 25mm 6mm 2 4mm 46mm £8.40 GTS.4006 40mm 6mm 2 5mm 76mm £10.90
GTS.2508 25mm 8mm 2 4mm 46mm £8.40 GTS.4008 40mm 8mm 2 5mm 76mm £10.90
GTS.2510 25mm 10mm 2 4mm 46mm £8.40 GTS.4010 40mm 10mm 2 5mm 76mm £10.90
GTS.2512 25mm 12mm 2 4mm 46mm £8.40 GTS.4012 40mm 12mm 2 5mm 76mm £10.90
GTS.2516 25mm 16mm 1 4mm 46mm £8.40 GTS.4016 40mm 16mm 1 5mm 76mm £10.90
GTS.2520 25mm 20mm 1 4mm 46mm £8.40 GTS.4020 40mm 20mm 1 5mm 76mm £10.90
GTS.3206 32mm 6mm 2 4mm 60mm £10.00 GTS.4025 40mm 25mm 1 5mm 76mm £10.90
GTS.3208 32mm 8mm 2 4mm 60mm £10.00 GTS.4032 40mm 32mm 1 5mm 76mm £10.90
GTS.3210 32mm 10mm 2 4mm 60mm £10.00
GTS.3212 32mm 12mm 2 4mm 60mm £10.00
GTS.3216 32mm 16mm 1 4mm 60mm £10.00
GTS.3220 32mm 20mm 1 4mm 60mm £10.00 Dimensions L1 and L2 are approximate
5/8” square shank Single Wheel Knurling Tool 1/2” square shank Pivot Head Knurling Tool
with one 3/4”x3/8”x1/4” medium straight knurl £9.00 with two 3/4”x3/8”x1/4” medium spiral knurls £16.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 79
Reversible Tapping Attachment
M1.4-M7 6JT mount with 2 and 3 Morse arbor £186.00
M3-M12 6JT mount with 3 and 4 Morse arbor £240.00
M3-M20 3JT mount with 3 and 4 Morse arbor £286.00
HSSCO5 Cobalt Tap Sets (Taper, Second and Plug) ISO 529
M1.6 £9.83
M2 £8.30
M2.5 £7.38
M3 £6.93
M4 £6.93
M5 £7.45
M6 £7.25
HSS-E Spiral Point Tap DIN371/376 Ideal for stainless steel, tough materials
and Aluminium
M2 £7.90
M2.5 £6.55
M3 £5.20
M4 £5.87
M5 £5.41
M6 £5.41
M8 £6.94
M10 £8.38
M12 £10.56
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 80
HSS-E Spiral Flute Tap DIN371/376 Ideal for stainless steel, tough materials
and Aluminium
M2 £7.43
M2.5 £7.18
M3 £4.93
M4 £4.93
M5 £5.12
M6 £5.12
M8 £6.56
M10 £7.95
M12 £10.62
HSS-E TiAlN Coated Cold Forming Roll Tap with oil grooves
suit steels < 850NM, stainless steel, nickel, copper, aluminium and titanium DIN371
M2 £12.96
M2.5 £11.44
M3 £9.68
M4 £9.68
M5 £9.89
M6 £10.36
M8 £14.34
M10 £17.22
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 81
Spring Loaded Reversible Machine Tapping Centre Guide
TAPG001 Female centre for taps with male centre can be reversed for male
centre for taps with female centre. 1/2” shank, 3.2” overall length.
£9.50
TAPG002 Male centre for taps with female centre 1/2” shank, 3.2” overall
length.
£5.50
Die Stocks
Die stock for 13/16” OD dies £2.24
Die stock for 1” OD dies £2.48
Die stock for 1.1/2” OD dies £4.95
Die stock for 2” OD dies £6.90
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 82
DIN1814 Adjustable Tap Wrenches with Chromed Handles
No.0 M1-M8 capacity £3.45
No.2 M4-M12 capacity £4.24
No.3 M5-M20 capacity £8.20
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 84
Part No. Set1 Set2 Set3 Description Each
226-0300 Carbide Micro Drill 1/8" Turbo Shank 0.30mm only supplied in packs of 10 £3.00
226-0400 Carbide Micro Drill 1/8" Turbo Shank 0.40mm only supplied in packs of 10 £2.90
226-0500 Carbide Micro Drill 1/8" Turbo Shank 0.50mm only supplied in packs of 10 £2.60
226-0600 Carbide Micro Drill 1/8" Turbo Shank 0.60mm only supplied in packs of 10 £2.60
226-0700 * Carbide Micro Drill 1/8" Turbo Shank 0.70mm £1.50
226-0750 * Carbide Micro Drill 1/8" Turbo Shank 0.75mm £1.50
226-0800 * Carbide Micro Drill 1/8" Turbo Shank 0.80mm £1.50
226-0850 * * Carbide Micro Drill 1/8" Turbo Shank 0.85mm £1.50
226-0900 * * Carbide Micro Drill 1/8" Turbo Shank 0.90mm £1.50
226-0950 * * Carbide Micro Drill 1/8" Turbo Shank 0.95mm £1.50
226-1000 * Carbide Micro Drill 1/8" Turbo Shank 1.00mm £1.50
226-1050 * * Carbide Micro Drill 1/8" Turbo Shank 1.05mm £1.50
226-1100 * Carbide Micro Drill 1/8" Turbo Shank 1.10mm £1.50
226-1150 * * Carbide Micro Drill 1/8" Turbo Shank 1.15mm £1.50
226-1200 * Carbide Micro Drill 1/8" Turbo Shank 1.20mm £1.50
226-1250 * * Carbide Micro Drill 1/8" Turbo Shank 1.25mm £1.50
226-1300 * * Carbide Micro Drill 1/8" Turbo Shank 1.30mm £1.50
226-1350 * Carbide Micro Drill 1/8" Turbo Shank 1.35mm £1.50
226-1400 * Carbide Micro Drill 1/8" Turbo Shank 1.40mm £1.50
226-1450 * Carbide Micro Drill 1/8" Turbo Shank 1.45mm £1.50
226-1500 * * Carbide Micro Drill 1/8" Turbo Shank 1.50mm £1.50
226-1550 * Carbide Micro Drill 1/8" Turbo Shank 1.55mm £1.50
226-1600 * Carbide Micro Drill 1/8" Turbo Shank 1.60mm £1.50
226-1650 * Carbide Micro Drill 1/8" Turbo Shank 1.65mm £1.50
226-1700 * Carbide Micro Drill 1/8" Turbo Shank 1.70mm £1.50
226-1800 * Carbide Micro Drill 1/8" Turbo Shank 1.80mm £1.50
226-1850 * Carbide Micro Drill 1/8" Turbo Shank 1.85mm £1.50
226-1900 * Carbide Micro Drill 1/8" Turbo Shank 1.90mm £1.50
226-1950 * Carbide Micro Drill 1/8" Turbo Shank 1.95mm £1.50
226-2000 * Carbide Micro Drill 1/8" Turbo Shank 2.00mm £1.50
226-2050 * Carbide Micro Drill 1/8" Turbo Shank 2.05mm £1.50
226-2100 * Carbide Micro Drill 1/8" Turbo Shank 2.10mm £1.50
226-2150 * Carbide Micro Drill 1/8" Turbo Shank 2.15mm £1.50
226-2200 * * Carbide Micro Drill 1/8" Turbo Shank 2.20mm £1.50
226-2250 * Carbide Micro Drill 1/8" Turbo Shank 2.25mm £1.50
226-2300 * Carbide Micro Drill 1/8" Turbo Shank 2.30mm £1.50
226-2350 * Carbide Micro Drill 1/8" Turbo Shank 2.35mm £1.50
226-2400 * Carbide Micro Drill 1/8" Turbo Shank 2.40mm £1.50
226-2500 * Carbide Micro Drill 1/8" Turbo Shank 2.50mm £1.50
226-3000 * Carbide Micro Drill 1/8" Turbo Shank 3.00mm £1.50
226-3050 * Carbide Micro Drill 1/8" Turbo Shank 3.05mm £1.50
226-3150 * * Carbide Micro Drill 1/8" Turbo Shank 3.15mm £1.50
226-3175 * Carbide Micro Drill 1/8" Turbo Shank 3.175mm (1/8") £1.50
226-Set1 * Set of 20 Carbide Micro Drill 0.70- 3.00mm in plastic case £29.30
226-Set2 * Set of 19 Carbide Micro Drill 0.75- 3.175mm in plastic case £27.80
226-Set3C * Set of 10 Carbide Micro Drill 0.85– 3.15mm in plastic case £15.00
All sizes 0.70mm and over 10mm flute length, 0.30 5.5mm flute, ,0.40 and 0.50mm 6.5mm flute, 0.60mm 7.0mm flute
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 85
D-BURR
Hand Deburring Systems
UTH Handle
Universal Telescopic handle, stores blades in handle (accepts all
blade holders)
Blade Holder E
blade holder E telescopes in handle (accepts “E” series blades)
Blade Holder B
blade holder B telescopes in handle (accepts “B” series blades)
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 86
D-BURR
Hand Deburring Systems
BE Handle
BE handle, stores blades in handle (accepts all B and E blades)
Blade Holder C
blade holder C telescopes in handle (accepts “C” series blades)
£2.79 each
Blade Holder D
blade holder D telescopes in handle (accepts “D” series blades)
£2.79 each
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 87
D-BURR
Hand Deburring Systems
K1 Keyway Burr
Removes burrs from internal and external keyways 2.4-11mm
with 1 N80K HSS blade
P1 Plate Burr
Sheet deburring tool with 2 P80 adjustable HSS blades and
hand guard
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 88
Calipers
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 89
Plunger Type Dial Gauge
58mm dial 10mm travel x0.01mm lug back 6 jewel shockproof £12.00
Spare contact point £3.95
Magnetic Bases
Fine adjustment 60Kg pull £10.50
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 90
Central Locking Adjustable Centering Arm
8mm shank, two swivel joints allow universal positioning and central locking, with dovetail
and 8mm spigot clamp, very useful for centering holes on milling machines etc.
Halfround Holder
HCH2000 5/32”and dovetail £11.50
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 91
Style E Double Ended Go/No Go Screw Plug Gauge
M1.6x0.35 6H £29.50 M10x1.5 6H £15.50
M2x0.4 6H £26.50 M10x1.25 6H £15.50
M2.5x0.45 6H £22.50 M10x1.0 6H £15.50
M3x0.5 6H £20.50 M10x0.75 6H £56.00
M3x0.35 6H £42.00 M12x1.75 6H £17.50
M4x0.7 6H £18.50 M12x1.5 6H £17.50
M4x0.5 6H £28.00 M12x1.25 6H £17.50
M5x0.8 6H £15.50 M12x1.0 6H £17.50
M5x0.5 6H £28.00 M14x2.0 6H £23.50
M6x1.0 6H £15.50 M14x1.5 6H £38.00
M6x0.75 6H £28.00 M16x2.0 6H £25.50
M6x0.5 6H £48.00 M16x1.5 6H £25.50
M8x1.25 6H £15.50 M16x1.0 6H £25.50
M8x1.0 6H £15.50 M20x2.5 6H £27.50
M8x0.75 6H £33.00 M20x1.5 6H £27.50
M24x3.0 6H £30.50
10x32UNF 2B £21.50
1/4”x28UNF 2B £18.50
5/16”x24UNF 2B £18.50
3/8”x24UNF 2B £18.50
1/2”x20UNF 2B £22.50
10x32UNF 3B £26.50
3/4”x10UNC 3B Offers
1.3/8”x6UNC 3B Offers
1/8”BSP £23.00
1/4”BSP £28.00
3/8”BSP £30.00
1/2”BSP £33.00
3/4”BSP £42.00
1”BSP £45.00
All other diameters, pitches, BA, BSB, BSCY, BSF,BSP(F), BSPT, BSF, BSW, ME, NPT, NPTF, NPS, NPSF, PG,
UNC, UNF, UNEF, UNJF, UNS please enquire.
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 92
Carbide Tipped Micrometers 0.01mm reading
Satin chrome finish with heat plates, ratchet, locking lever and wrench
0-25mm £10.50
25-50mm with setting rod £11.50
50-75mm with setting rod £13.00
75-100mm with setting rod £15.50
100-125mm with setting rod £18.20
125-150mm with setting rod £21.50
0-1” £10.50
1-2” with setting rod £11.50
2-3” with setting rod £13.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 93
Gauge Block Sets DIN861
manufacturer’s certificate - single Point UKAS - 5 Point UKAS
M88 grade 1 ceramic slip gauge set POA POA -
M88 grade 1 tungsten slip gauge set £526.00 POA POA
M88 grade 1 steel slip gauge set £240.00 £91.00 £130.00
M47 grade 1 ceramic slip gauge set POA POA -
M47 grade 1 tungsten slip gauge set £456.00 POA POA
M47 grade 1 steel slip gauge set £175.00 £60.00 £83.00
M10 grade 1 ceramic MIKECHEX set POA POA -
M10 grade 1 steel MIKECHEX set £97.90 £35.00 £60.00
0.5 - POA
1.0 - POA
1.0005 - POA
20.0 - POA
30.0 - POA
40.0 - POA
50.0 - POA
60.0 - POA
70.0 - POA
80.0 - POA
90.0 - POA
100.0 - POA
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 94
Precision Pin Gauge Sets
raceable o N UKAS certification available
Boxes and gauges both marked
Size and serial number laser etched on each piece (M0/01 not
etched)
Material: 52100 Bearing eel
No sharp edges
51mm overall length
Centerless lapped
Each gauge is inspected and has a 8 microfinish or better
Heat treated to a hardness of 60-62 Rockwell C
Individual pins,and other Metric and Imperial sets also available
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 95
Individual Precision Pin Gauges
raceable o N UKAS certification available
Size and serial number laser etched on each piece over1.51mm
Material: 52100 Bearing eel
No sharp edges
51mm overall length
Centerless lapped
Each gauge is inspected and has a 8 microfinish or better
Heat treated to a hardness of 60-62 Rockwell C
Individual pins,and other Metric and Imperial sets also available
All sizes over 12.71 mm Price on Application
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 96
Black Ox Precision Imperial Pin Gauges
FEATURES:
USES:
Set No. Range Inch Increment Inch No. Of Pins Tolerance Inch Price
.011-.060” £7.40
Please state plus or minus tolerance .061-.500” £7.20
.501-.625” £8.30
.626-.750” £9.60
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 97
Radius Gauge penknife Sets
1-7mm, 1.0-3.0x0.25 & 3.5-7x0.5mm concave and convex £6.25
7.5-15mm, 7.5-15x0.5mm concave and convex £6.25
15.5-25mm, 15.5-20x0.5 & 21-25x1.0mm concave and convex £6.25
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 98
PL7 Precision Adjustable +/-5⁰ Die Correctors Square
Control Square
25x20, 40x28, 75x50 DIN875/00 bevel edge squares, 100mm DIN874/00 straight edge and
scriber point in Wooden case £74.00
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 99
Electronic Edge Finder
GT01E 5MM x12mm shank electronic edge finder £41.80
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 100
APKT 90° End Mills
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 102
Tee Slot Cutters
Toolholder No. Diameter Width Shank Length No. of Teeth Z Insert Price
T21x9 21mm 9mm 16mm 100mm 2 CCMT06 £89.00
T25x11 25mm 11mm 25mm 100mm 2 CCMT06 £95.00
T25x12 25mm 12mm 25mm 100mm 2 CCMT06 £99.00
T32x14 32mm 14mm 25mm 100mm 2 CCMT09 £120.00
T40x18 40mm 18mm 32mm 100mm 4 CCMT09 £127.00
Toolholder No. Diameter Angle Shank Length No. of Teeth Z Insert Price
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 103
0.6-0.8µM Sub-Micrograin
K20/K30 Tungsten Carbide
Centre Cutting End Mills
4 Flute CNC Ground
Superior AlTiN Coated
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 104
0.6-0.8µM Sub-Micrograin
K20/K30 Tungsten Carbide
Centre Cutting End Mills
3 Flute CNC Ground
Superior AlTiN Coated
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 105
0.6-0.8µM Sub-Micrograin
K20/K30 Tungsten Carbide
Centre Cutting Slot Drills
2 Flute CNC Ground
Superior AlTiN Coated
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 106
0.6-0.8µM Sub-Micrograin
K20/K30 Tungsten Carbide
Centre Cutting Ball Nose Slot Drills
2 Flute CNC Ground
Superior AlTiN Coated
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 107
0.6-0.8µM Sub-Micrograin
K20/K30 Tungsten Carbide
Centre Cutting Slot Drills
2 Flute CNC Ground
For Aluminium
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 108
0.6-0.8µM Sub-Micrograin
K20/K30 Tungsten Carbide
Chamfer Cutter Mill Drill Spotting Drill
2 Flute CNC Ground
Superior Nano Black Coated
0.6-0.8µM Sub-Micrograin
K20/K30 Tungsten Carbide
Corner Rounding Cutter
4 Flute CNC Ground
Superior Nano Black Coated
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 109
Micrograin Tungsten Carbide Centre
Cutting Micro Slot Drills 2 Flute
CNC Ground
Also available
0.2,0.3,0.8,0.9mm
please enquire for prices
Also available
0.3,0.4,0.8,0.9mm Micrograin Tungsten Carbide Centre
please enquire for prices Cutting Micro Ball Nose Slot Drills
2 Flute CNC Ground
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 110
TiAlN Coated HSSCO8 Centre Cutting 2 Flute
DIN844 Slot Drills CNC Ground
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 111
HSSCO8 Centre Cutting 3 Flute
FC3 Throwaway Cutter
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 112
HSSCO8 Ball Nosed Centre Cutting 3 Flute
FC3 Throwaway Cutter
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 113
Z6 Double Cut Tungsten Carbide Burrs
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 114
Z6 Double Cut Tungsten Carbide Burrs
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 115
Z6 Double Cut Tungsten Carbide Burrs
Part No. Head Diameter Shank Head OAL Price
Length
P3/13x38x3 3mm 3mm 13mm 38mm £3.03
P6/13x50x3 6mm 3mm 13mm 50mm £6.36
P6/16x50x6 6mm 6mm 16mm 50mm £6.89
P8/20x65x6 8mm 6mm 20mm 65mm £7.05
P10/20x63x6 10mm 6mm 20mm 63mm £7.25
P10/20x150x6 10mm 6mm 20mm 150mm £11.32
P12/25x70x6 12mm 6mm 25mm 70mm £9.71
P12/25x150x6 12mm 6mm 20mm 150mm £14.11
P16/30x65x6 16mm 6mm 30mm mm £11.98
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 116
Single Cut Tungsten Carbide Burrs
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 117
Schmidt Diamond Needle Files
Schmidt......probably the best diamond files in the world
Part Shape Section Length mm Shape Set 140/6K Set 140/6B Grit
No.
All Schmidt diamond needle files are fitted with rubber palm stop
which can be removed if being held in a needle file handle.
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 118
DiamanTool Diamond and CBN Tools
Diamond Files
410RM 10cm 40mm 240 Set of 4 above 0.9-1.5mm £7.60 per set
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 119
DiamanTool Diamond and CBN Tools
Diamond Needle Files
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 120
DiamanTool Diamond and CBN Tools
CBN Needle Files
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 121
DiamanTool Diamond and CBN Tools
Diamond Needle Files (not dipped handle)
Part No. Length Coated Grit Shape Section Price
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 122
DiamanTool Diamond and CBN Tools
Grinding Wheels
Type Diameter Abrasive Grit Size Grit Conc Price
11V9 90mm U=10 X=3mm D126 Diamond 50 £22.00
11V9 90mm U=10 X=3mm D126 Diamond 75 £26.00
11V9 90mm U=10 X=3mm B126 CBN 50 £26.50
11V9 90mm U=10 X=3mm B126 CBN 75 £31.00
11V9 125mm U=10 X=3mm D126 Diamond 75 £45.00
11V9 125mm U=10 X=3mm B126 CBN 75 £55.00
6A2 100mm W=10 X=3mm D126 Diamond 75 £37.00
6A2 100mm W=10 X=3mm B126 CBN 75 £44.00
1A1 100mm T=10 X=3mm D126 Diamond 75 £34.00
1A1 100mm T=10 X=3mm B126 CBN 75 £38.00
1A1 150mm T=10 X=3mm D126 Diamond 50 £37.00
1A1 200mm T=6 X=3.5mm D107 Diamond 100 £89.00
1A1R 125mm T=3 X=3mm D126 Diamond 75 £28.66
12V9 100mm U=10 X=3mm D126 Diamond 75 £40.00
12V9 125mm U=10 X=3mm D126 Diamond 75 £42.00
12V9 125mm U=10 X=3mm B126 CBN 75 £50.00
12V9 150mm U=10 X=3mm D126 Diamond 75 £44.00
12V9 150mm U=10 X=3mm B126 CBN 75 £53.00
4A2 125mm W=4 X=3mm D126 Diamond 75 £28.00
All wheels supplied with 31.75mm bore and plastic bushes are available free of charge for standard spindle sizes
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 123
DiamanTool Diamond and CBN Tools
Grinding Pins
Other sizes, tapered and form pins available
please call
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 124
DiamanTool Diamond and CBN Tools
Diamond bench stone
2.3/4" x 8" Double Sided Diamond stone with bench stand sharpen chisels knives etc. One
side 400grit the other side 1000grit. £29.00
Large range of Diamond mounted points and grinding bits for stained glass available please call
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 125
Felt Bobs 3mm shank
AB-0408A £0.45 AB-0512J £0.45
AB-0509A £0.45 AB-0616J £0.50
AB-0610A £0.45 AB-0817J £0.56
AB-0810A £0.45 AB-1020J £0.56
AB-1014A £0.45 AB-1225J £0.73
AB-1220A £0.62 AB-08B £0.56
AB-0408C £0.45 AB-10B £0.56
AB-0509C £0.45 AB-12B £0.67
AB-0610C £0.45 AB-1014R £0.56
AB-0810C £0.45 AB-1225R £0.84
AB-1013C £0.45 AB-1218T £0.73
AB-1220C £0.62 AB-1218H £0.73
AB-0410J £0.45 AB-SET25 £13.61 1 each as listed
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 126
Energizer Batteries
LR44 (357/303/A76) 1.5V alkaline
Pack of 2 £1.50 per pack
Zeus Chart
An extremely handy pocket sized reference booklet of data charts and tables for the drawing office,
toolroom or workshop. This metric revision publication is produced by Zeus Precision Charts Ltd,
who are members of the British Standards Institution. The 28 laminated pages contain data on
standard drill sizes and decimal equivalents, tapping drills and clearances for metric and imperial
threads, BS4500 tolerances, hardeners comparisons, jig boring co-ordinates for equally spaced
holes, allowances for sheet metal bending and Morse tapers. Also long tables for sine, cosine, tan-
gents and cotangent.
£7.95 VAT exempt
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 127
Chrome Vanadium Professional Adjustable Spanners
493-150 24mm capacity 150mm long £17.68
All items are sold in accordance with our standard terms and conditions (a copy of which is available on request).
Gloster Tooling Supplies Limited 52 Pinewood road, Quedgeley, Gloucester, GL2 4RY Tel:01452 729210 info@glostertooling.co.uk Page 128