Professional Documents
Culture Documents
FK 2431
FK 2431
31(5)GB
12.98
PN 10 and ANSI Class 150 Replaces Fk 24.31(4)GB, 3.98
DN 50 - 1200
Primary characteristics
NAF-Knife, knife gate valves are available as standard with
the body made of cast iron or stainless steel. The distinctive
features of these vales are:
two versions - knife gate or through-going gate for
more difficult operating conditions.
body cast in one piece for valves with knife gate.
body consisting of two cast halves which are bolted
together for valves with through-going gate.
full bore.
metal or soft seat for leakage proof shut-off. The soft
seal is available in a number of different grades of
rubber or of PTFE.
internal, conical shaped body with increasing space
from packing box and downwards to avoid build-up.
guide inside the body for the gate which also increases
back flow resistance.
the packing box is provided with two packing rings with
intermediate pre-set O-ring to minimise leakage.
non-rising stem also available.
protections for moving parts (gate and stem) delivered
as standard at remote control application.
various shapes of ports available with different control
characteristics (V, Square and Pentagonal port)
deflector which protects the gate seal against abbrasive
medias. Can be ordered as a separate part.
several types of limit switches and solenoid valves
available as options.
Applications
Depending on the material combination selected, NAF-
Knife, knife gate valves are suitable for pulp, alkalies, fluids
with high fibre contents, waste water, air and powder. The
through-going gate version is employed for more difficult
operating conditions, e.g. when the solids is high such for
pulp, slurries or for powder (coal powder, cement etc) Technical specification
Material: Cast iron or stainless steel
available as standard
Range of sizes: DN 50 - 800
Size 2" - 48"
Pressure rating: PN 10 and ANSI 150
Connections: Sandwiched between flanges
Max. differential DN 50 - 125 10 bar
pressures: DN 150 8 bar
DN 200 7 bar
DN 250 - 300 5 bar
DN 350 - 400 4 bar
DN 450 - 600 3 bar
DN 700 - 1200 2 bar
Temperature range: See product code,
code digit 5. Gate seal
Test pressure: 1.5xPN with valve open
1.1x∆P with valve closed
Sealing class: Soft seal: SS-ISO 5208,
Class 3, DIN 3230 BN,
Leckrate 1
Pneumatic actuator: Supply pressure 5 bar,
Intelligent Automation
(Max. 8 bar)
1
Materials
19
14
16 18
17
15
Seat types
9 11
1
10
Seats with deflector
12
13
2
Knife gate valves
øV
Hv
DN
øK
All dimensions in mm A
DN A B C D ØV Hv ØK Mass
PN 10 ANSI 150 kg
3
Materials
17
14
20
15
19
18
21
16
23 26
22 13
24 25
27
7
2
6
3
4
5
12 11
4
Knife gate valves
Hn
B
øK
A
DN
C
C1
All dimensions in mm
DN A B C C1 J Hn ØK Mass
PN 10 ANSI 150 kg
5
Product code NAF knife gate valves
Example
25 8 2 A B - 0150 - B A
Code 1 2 3 4 5 6 7 8
8. Gate seat
°C
0 Metal -
A EPDM 130
B FPM (Viton) 170
C PTFE 200
D Butyl 80 (Available on request)
E Nitril 90 (Available on request)
NAF AB
SE-581 87 Linköping
Sweden
Telephone +46 13 31 61 00
Facsimile +46 13 13 60 54 We reserve the right to design modifications without prior notice
Telex 50069 nafexp s Ask for our address list Fk 01.10GB of representatives in other
countries