Professional Documents
Culture Documents
Posted plate with all specifications (make, model, s/n, weight, capacity, date of Mfg., B30.23 Compliance)______________________________
Designed with 5-1 safety factor___________________________________________________________________________________________
Designed to minimize tipping___________________________________________________________________________________________
42” high top rail ______________________________________________________________________________________________________
Intermediate rail _____________________________________________________________________________________________________
4” toe board with expanded metal from the top of the toe board to the intermediate rail. ___________________________________________
Slip resistant drain-able floor with openings no larger than .5 in. ______________________________________________________________
Expanded metal openings not greater than .5 in.____________________________________________________________________________
Grab rail inside the entire perimeter_______________________________________________________________________________________
Access gate swings in if so fitted_________________________________________________________________________________________
Access gate restraining device and hinges_________________________________________________________________________________
Mounting by the Manufacturer__________________________________________________________________________________________
Rough edges smoothed________________________________________________________________________________________________
All welds free of defects _______________________________________________________________________________________________
Rigging must be at 5-1 if fitted___________________________________________________________________________________________
Levering to 10% regardless of boom angle__________________________________________________________________________________
Bolt Connections to AISC Spec. using ASTM A 325 or A 490 Bolts______________________________________________________________
Inspect platform after trial lift___________________________________________________________________________________________
Personnel Harness tie-offs _____________________________________________________________________________________________
Weatherproof compartment for operators manual for units with controls in the platform____________________________________________
Controls identified, protected, easily accessible, return to neutral when released and a Deadman Control_______________________________
Test Weight - ____________ lb. _________________________________________________________________________________________
Perform a 125% proof test ______________________________________________________________________________________________
Notes________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________
____________________________________________________________________________________________________________________