You are on page 1of 6

FOBAS Fuel analysis report

Job reference: 221442811 Published date: 30 Sep 2022

Visit www.lrgmt.com to see samples in transit, analysis reports, fuel stats & other useful info. Contact us for access.

Client: Pos SM Co., Ltd.


Vessel: Pan Optimum
IMO: 9890915
Port: LANSHAN, Date: 22 Sep 2022
Report Status: Green

Technical points worth noting

Recommended Min Storage Temp: 25°C

Recommended Min Transfer Temp: 25°C

Recommended Purifier Temp: 98°C


Injection Temp (Approx): 113°C at 10cSt 92°C at 17cSt
105°C at 12cSt 87°C at 20cSt
97°C at 15cSt 80°C at 25cSt
Page 2 of 5

Job reference: 221442811 Published date: 30 Sep 2022


Advised bunker details

Bunker receipt information Sampling information


Supplier CHIMBUSCO Sample Point Type MANIFOLD
Barge/Installation BO HAI GONG 9 Sampling Method DRIP
Sampled Date 2022-09-22 Witnessed by Supplier NOT STATED
Bunker Quantity (MT) 810
Density @ 15°c kg/l 0.9382 Additional information
Viscosity cSt 88.3 Planned changeover NOT STATED
Sulphur (%) 0.42 (VLS) Qty of Bunker ROB NOT STATED
Grade Ordered RMG380 Tanks loaded NOT STATED
Next Port NOT STATED
ETA Next Port NOT STATED

Transit details

Dispatch Date 2022-09-26 Courier DHL

Dispatched From NEW AWB Number 2316143981

Lab Receipt Date 2022-09-29

Sample seal numbers

Lab Cap Seal 2572273 Supplier Seal 3058319

Lab Tag Seal(s) 3058318 MARPOL Seal 563126

Vessel Seal NOT STATED


Page 3 of 5

Job reference: 221442811 Published date: 30 Sep 2022


Test results
Characteristic Method Unit Required Tested

Sample 221442811
ISO-F Grade( 2010/12 ) RMG380VLS RMG380VLS
Density @ 15°c ISO 12185 kg/l 0.9910 Max 0.9335
K Viscosity at 50°C ISO 3104 cSt 380 Max 87.0
Flash Point ASTM D6450 °C 60 Min > 70.0
Pour Point ISO 3016 °C 30 Max 15
Micro Carbon Residue ISO 10370 %m/m 18.0 Max 7.21
Ash Content at 550°C ISO 6245 %m/m 0.10 Max 0.022
Water Content ASTM D6304 %v/v 0.50 Max 0.05
Sulphur Content ISO 8754 %m/m 0.42 0.41
Total Sediment ISO 10307-2B %m/m 0.10 Max < 0.01
Vanadium IP 501 mg/kg 350 Max 2
Sodium IP 501 mg/kg 100 Max 2
Aluminium IP 501 mg/kg - 2
Silicon IP 501 mg/kg - 2
Aluminium + Silicon Calc mg/kg 60 Max 4
Calcium IP 501 mg/kg 30 Max 11
Phosphorus IP 501 mg/kg 15 Max <1
Zinc IP 501 mg/kg 15 Max <1
Iron IP 501 mg/kg - 9
Nickel IP 501 mg/kg - 25
Magnesium IP 501 mg/kg - <1
Lead IP 501 mg/kg - <1
Potassium IP 501 mg/kg - <1
TAN ASTM D664 mgKOH/g 2.5 Max 0.17
SAN ASTM D664 mgKOH/g - 0.0
CCAI Index Index 870 Max 812
ChemScan In House - - Pass
Page 4 of 5

Job reference: 221442811 Published date: 30 Sep 2022

Calculated values

K Viscosity at 100°C Calc cSt - 14.0

Net Specific Energy Calc MJ/kg - 41.83

Gross Specific Energy Calc MJ/kg - 44.34

Quantity difference based on tested density

Quantity Bunkered MT - 810

Standard Vol. Bunkered (at 15°C) m³ - 863.355

Supplier Density kg/l - 0.9382

Analysis Density kg/l - 0.9335

Qty Diff Due to Density MT - -4.058


Page 5 of 5

Job reference: 221442811 Published date: 30 Sep 2022


Comments

Green

1. The fuel, to the extent tested, corresponds to an ISO-F-RMG380 grade.

2. Total Sediment result indicates that the fuel will remain stable during normal storage, handling
and use.

3. Acid Number is considered to be at a satisfactory low level for a marine fuel and would not be
expected to give rise to problems during use.

4. The fuel as tested complies with the Revised MARPOL Annex VI reg. 14.1.3.

The analysis results and subsequent advisory comments in this report are based on the testing of the sample as received
into the laboratory. The sample is provided to us by the client/vessel along with the corresponding sample details stated on
page two of this report.

Note: The accuracy of the results obtained are dependent on the sample tested being truly representative of the fuel as loaded. To draw representative samples please
refer to the FOBAS Sampling Procedures Manual. For further information on the MARPOL Annex VI Reg. 14 & 18 requirements and its on-going developments, please
contact your local Lloyd's Register FOBAS office or contact us directly on fobas@lr.org

Lloyd's Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as
'Lloyd's Register'. Lloyd's Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or
advice in this document or howsoever provided, unless that person has signed a contract with the relevant Lloyd's Register entity for the provision of this information or
advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.
Stats Appendix

Job reference: 221442811 Published date: 30 Sep 2022


General statistics
Values for this bunker: Averages for this port:

AlSi 4 Avg AlSi 16


Water 0.05 Avg Water 0.13
Density 0.9335 Avg Density 0.9426
Viscosity 87.0 Avg Viscosity 84.0
Sulphur 0.41 Avg Sulphur 0.40
Sediment < 0.01 Avg Sediment 0.01
Acid Number 0.17 Avg Acid Number 0.85

Comparison with previous three samples for this vessel

Sample This sample 220028711 229072811 228640211

Lab Seal(s) 2572273 2572271 2572269 2572265

Tested Grade RMG380VLS RMG380VLS RMG380VLS RMG380VLS

Density @ 15°c kg/l 0.9335 0.9362 0.9262 0.9172

K Viscosity at 50°C cSt 87.0 385.5 204.6 94.6

K Viscosity at 100°C cSt 14.0 35.0 24.0 15.0

Flash Point °C > 70.0 > 70.0 > 70.0 > 70.0

Pour Point °C 15 24 15 21

Micro Carbon Residue % m/m 7.21 8.81 9.10 7.23

Ash Content at 550°C % m/m 0.022 0.030 0.018 0.024

Water Content % v/v 0.05 0.20 < 0.05 0.20

Sulphur Content % m/m 0.41 0.49 0.38 0.46

Total Sediment % m/m < 0.01 0.02 < 0.01 0.14

Vanadium mg/kg 2 10 6 17

Sodium mg/kg 2 22 4 17

Aluminium + Silicon mg/kg 4 13 5 8

TAN mgKOH/g 0.17 2.15 0.20 1.03

SAN mg KOH/g 0.0 0.0 0.0 0.0

CCAI Index 812 797 794 794

You might also like