The brush plug is used to close off pipe ends during brushing of external coatings to prevent brush needles, burrs, and dust from entering the pipe. It is made of metal rings and grips with an EPDM rubber profile and sheet. The EPDM rubber has specific hardness, density, temperature resistance, tear resistance, and elasticity properties. A sketch shows the brush plug provides a complete closure of the pipe wall during brushing through clamping of the rubber profile and sheet between the metal ring.
The brush plug is used to close off pipe ends during brushing of external coatings to prevent brush needles, burrs, and dust from entering the pipe. It is made of metal rings and grips with an EPDM rubber profile and sheet. The EPDM rubber has specific hardness, density, temperature resistance, tear resistance, and elasticity properties. A sketch shows the brush plug provides a complete closure of the pipe wall during brushing through clamping of the rubber profile and sheet between the metal ring.
The brush plug is used to close off pipe ends during brushing of external coatings to prevent brush needles, burrs, and dust from entering the pipe. It is made of metal rings and grips with an EPDM rubber profile and sheet. The EPDM rubber has specific hardness, density, temperature resistance, tear resistance, and elasticity properties. A sketch shows the brush plug provides a complete closure of the pipe wall during brushing through clamping of the rubber profile and sheet between the metal ring.
Use: Closing off pipe-ends against brush needles, burrs and dust during the cutback brushing of the external coating layer
Commodity / HS code brush plug: 73269098
Materials standard product:
Metal rings : DX 51 DZ-275-NAC (Material nr: 1.0226) Metal hand grips : St. 37-2 Rubber profile : EPDM Rubber sheet : EPDM
Technical specification EPDM rubber:
Rubber: Profile Sheet Quality 82280 81360 Thickness - 1,2 – 1,5 mm Hardness 80°+5°shore A 60°+5°shore A Density 1,25 Kg / dm3 1,23 Kg / dm3 Temperature range -40ºC / +120ºC -40ºC / +120ºC Resistance against tear - 8,4 N/mm Resistance against break 8,0 MPa 9,2 MPa Elasticity at break 250 % 400 %
Sketch 1: Cross-section of pipe wall with brush plug
Further information: Pipe wall - Sketch sizes in: [mm]
- Product range: 2" - 120"
Rubber profile 22 - Complete pipe closure during brushing - Fast and easy fitting and removal - Strong clamping - Light-weight - Re-usable - Exchangeable parts - By placing adjustment rubber, diameter Pipe closing sheet Metal ring tolerances of 10 mm can be absorbed - The brush plug can be modified 70 according to customer wishes
Dhatec BV Telephone ++31 497 54 25 27
Geestenberg 4 Telefax ++31 497 55 53 99 VAT no. NL8097.76.376.B01 NL-5571 SN Bergeijk E-mail info@dhatec.nl Chamber of Commerce no. 17076402 The Netherlands Website www.dhatec.nl Rabobank Valkenswaard 17.29.11.362