Professional Documents
Culture Documents
MatrixAir Solar Fresh Air Heating System by Matrix Energy
MatrixAir Solar Fresh Air Heating System by Matrix Energy
MatrixAir ™ OFFERS
• Significant energy savings versus conventional
make-up or ventilation air systems
• Ventilation & air filtration
• Insulation & heat recovery
Patent Pending
ÉNERGIE
For more information visit www.matrixenergy.ca
MATRIX Toll Free: 1-866-630-5630 email: info@matrixenergy.ca
ENERGY
Matrix Air
Solar Air Heating System
™
Space heating
In hybrid applications MatrixAir ™ cladding not only
provides fresh air heating but may also be configured for
5
domestic hot water or space heating as well, particularly
5 in milder climates or for sports complex applications, for
example.
PRINCIPAL FUNCTIONS
• Significant energy savings versus conventional make-up or
FEATURES & BENEFITS
ventilation air systems
• Ventilation & air filtration • Wide assortment of profiles and colours adjust
• Insulation & heat recovery easily to a wide variety of building scenarios and
aesthetics
Typical applications:
• Integrating the solar collector into the building
• Stand alone ventilation air systems
• Visual make-up air unit fences façade yields cost efficiency
• Process air heating • Adaptable to a wide variety of single use or hybrid
• Air preheater for: (solar air and water heating) applications
• Make-up air systems • The electrostatic effect of the air moving through
• Heat pumps the perforations provide excellent fresh air filtration
• Geothermal loops properties further improving indoor air quality
• Hot Water
without increased maintenance cost
PERFORMANCE
During sunny days, MatrixAir ™ systems can preheat intake Air Temperature Rise vs. Solar Radiation at Various Flow Rates
air by 30˚ to 50˚F (17˚-30˚C), over ambient temperatures Solar Radiation - BTU/hr.ft² of MatrixAir ™
depending on the flow rate. In northern climates snow will 50 100 150 200 250 300
80
reflect up to 70% of the available solar radiation, and 40%
A
A. 1.0 CFM⁄ft² 5.0 (l/s)/m²
of this radiation is reflected on the cladding surface, B. 3.0 CFM⁄ft² 15.0 (l/s)/m²
70
substantially increasing the system’s performance. The C. 5.0 CFM⁄ft² 25.0 (l/s)/m²
D. 7.0 CFM⁄ft² 35.0 (l/s)/m² 60
following graph shows the temperature rise attainable
E. 9.0 CFM⁄ft² 46.0 (l/s)/m²
versus air flow/ft² of collector area at various sunlight
Te m p e r a t u r e R i s e - ° C
Te m p e r a t u r e R i s e - ° F
B
50
levels. Under constant conditions energy output is directly
related to the sunlight levels striking the cladding. 40
C
DESIGN CRITERIA
MatrixAir ™ will effectively provide heated air at
ventilation rates ranging from 3 - 9 cfm/ft² of MatrixAir ™
prepainted side
collector area with a maximum efficiency achieved near
7 – 8 cfm/ft². For example, a 2500 ft² wall measuring
dimensions in inches
100 x 25 ft high could be configured to provide between MatrixAir™ 35150-B profile
7500 and 22500 CFM of air at inlet temperatures of 17 to
30˚C above ambient temperatures.
prepainted side
MATERIALS AND FINISHES
We offer a wide range of standard profiles in a host of MatrixAir™ 35150-BR profile
dimensions in inches
baked-on finish that’s formulated for its solar absorption MatrixAir™ 38134 profile
properties and resistance to ultraviolet radiation.
Performance as indicated is achieved using the standard
black finish.
prepainted side
Consult your Matrix Energy representative for the
expected performance of the MatrixAir ™system for MatrixAir™ 35150-S profile
dimensions in inches
your project.
Patent Pending
prepainted side
AUTHORIZED MATRIX ENERGY DISTRIBUTOR:
dimensions in inches
MatrixAir™ 35150-SR profile
prepainted side
dimensions in inches
MatrixAir™ 22068 profile
ÉNERGIE
MATRIX ENERGY