This document provides specifications for a liquid resin called DS-326PT produced by Shanghai Orisen New Material Technology Co., Ltd. The resin has a reddish viscous liquid appearance and properties including an acid value between 23-29 mgKOH/g, viscosity ranging from 300-625 cps depending on season, and gel times between 5-36 minutes also depending on season. Performance tests of castings made with the resin show values greater than or equal to 40 Barcol hardness, 50 MPa tensile strength, 2000 MPa tensile modulus, 5.0% elongation at break, 90 MPa flexural strength, 3000 MPa flexural modulus, 6.0 KJ/m2 impact strength, and
This document provides specifications for a liquid resin called DS-326PT produced by Shanghai Orisen New Material Technology Co., Ltd. The resin has a reddish viscous liquid appearance and properties including an acid value between 23-29 mgKOH/g, viscosity ranging from 300-625 cps depending on season, and gel times between 5-36 minutes also depending on season. Performance tests of castings made with the resin show values greater than or equal to 40 Barcol hardness, 50 MPa tensile strength, 2000 MPa tensile modulus, 5.0% elongation at break, 90 MPa flexural strength, 3000 MPa flexural modulus, 6.0 KJ/m2 impact strength, and
This document provides specifications for a liquid resin called DS-326PT produced by Shanghai Orisen New Material Technology Co., Ltd. The resin has a reddish viscous liquid appearance and properties including an acid value between 23-29 mgKOH/g, viscosity ranging from 300-625 cps depending on season, and gel times between 5-36 minutes also depending on season. Performance tests of castings made with the resin show values greater than or equal to 40 Barcol hardness, 50 MPa tensile strength, 2000 MPa tensile modulus, 5.0% elongation at break, 90 MPa flexural strength, 3000 MPa flexural modulus, 6.0 KJ/m2 impact strength, and
Note: experimental ambient temperature 23 ± 2 °C relative humidity 50 ± 5%
Note: Gel time, viscosity, thermal stability can be customized according to customer requirement.
Packaging and Storage
DS-326PT is packaged in a metal drum Net weight 220KG, stored at 20 °C for six months, the corresponding increase in temperature will shorten the shelf life, storage should be placed in a cool ventilated place, avoid direct sunlight and away from heat, inflammable materials, should stay away from open flame. In case of special storage temperature(25~35 °C) Polymerization inhibitor can be added to extend the storage time to 6~8months. Note: This data is in accordance with national standards (GB) determination, because in the process has many factors, so do not rule out the need for user-testing research, the law does not guarantee certain properties of the product is fully applicable