Professional Documents
Culture Documents
2014 - 68 - EU Pressure Equipment - Summary List of Harmonised Standards - Generated On 20.04.2020
2014 - 68 - EU Pressure Equipment - Summary List of Harmonised Standards - Generated On 20.04.2020
Brussels, 20.04.2020
Summary of references of harmonised standards published in the Official Journal – Directive 2014/68/EU 1 of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the
laws of the Member States relating to the making available on the market of pressure equipment
The summary below consolidates the references of harmonised standards published by the Commission in the Official Journal of the European Union (OJ). It reproduces information already published in the L or C
series of the OJ as indicated in columns (2), (5) and/or (7). It contains all references which, when the summary was generated, still provided a presumption of conformity together with references already withdrawn
from the OJ.
The Commission services provide this summary for information purposes only. Although they take every possible precaution to ensure that the summary is updated regularly and is correct, errors may occur and the
summary may not be complete at a certain point in time. The summary does not as such generate legal effects.
OJ reference
OJ for Date of OJ
Date of start reference Date of start of publication withdrawal reference
of for presumption of of a from OJ (end for
Legislation Reference number of the presumption publication conformity restriction in of presumption withdrawal
reference ESO standard Title of the standard of conformity in OJ Restriction with restriction OJ of conformity) from OJ
(A) (B) (C) (D) (1) (2) (3) (4) (5) (6) (7)
Portable fire extinguishers - Part 8: Additional
requirements to EN 3-7 for the construction,
resistance to pressure and mechanical tests for
EN 3-8:2006, extinguishers with a maximum allowable pressure OJ C 293 -
2014/68/EU CEN EN 3-8:2006/AC:2007 equal to or lower than 30 bar 19/07/2016 12/08/2016 - - - - -
1
OJ L 189, 27.6.2014, p. 164–259
Commission européenne/Europese Commissie, 1049 Bruxelles/Brussel, BELGIQUE/BELGIË
Contact : GROW-B3@ec.europa.eu
1
OJ C 293 -
2014/68/EU CEN EN 19:2016 Industrial valves - Marking of metallic valves 12/08/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 267:2009+A1:2011 Automatic forced draught burners for liquid fuels 19/07/2016 12/08/2016 - - - - -
OJ C 293 - OJ C 326 -
2014/68/EU CEN EN 593:2009+A1:2011 Industrial valves - Metallic butterfly valves 19/07/2016 12/08/2016 - - - 14/09/2018 14/09/2018
EN 676:2003+A2:2008, OJ C 293 -
2014/68/EU CEN EN 676:2003+A2:2008/AC:2008 Automatic forced draught burners for gaseous fuels 19/07/2016 12/08/2016 - - - - -
2
Flanges and their joints - Circular flanges for pipes,
valves, fittings and accessories, PN designated - OJ C 293 - OJ C 326 -
2014/68/EU CEN EN 1092-1:2007+A1:2013 Part 1: Steel flanges 19/07/2016 12/08/2016 - - - 31/10/2018 14/09/2018
OJ C 293 -
2014/68/EU CEN EN 1171:2015 Industrial valves - Cast iron gate valves 12/08/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 1349:2009 Industrial process control valves 19/07/2016 12/08/2016 - - - - -
OJ C 293 - OJ L 250 -
2014/68/EU CEN EN 1562:2012 Founding - Malleable cast irons 19/07/2016 12/08/2016 - - - 30/09/2019 30/09/2019
OJ L 250 -
2014/68/EU CEN EN 1562:2019 Founding - Malleable cast irons 30/09/2019 30/09/2019 - - - - -
OJ C 293 - OJ L 250 -
2014/68/EU CEN EN 1563:2011 Founding - Spheroidal graphite cast irons 19/07/2016 12/08/2016 - - - 30/03/2020 30/09/2019
OJ L 250 -
2014/68/EU CEN EN 1563:2018 Founding - Spheroidal graphite cast irons 30/09/2019 30/09/2019 - - - - -
3
Flanges and their joints - Design rules for gasketed OJ C 293 -
2014/68/EU CEN EN 1591-1:2013 circular flange connections - Part 1: Calculation 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 1626:2008 Cryogenic vessels - Valves for cryogenic service 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 1797:2001 Cryogenic vessels - Gas/material compatibility 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 1983:2013 Industrial valves - Steel ball valves 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 1984:2010 Industrial valves - Steel gate valves 19/07/2016 12/08/2016 - - - - -
4
Safety devices for protection against excessive
pressure - Part 2: Bursting disc safety devices (ISO OJ L 250 -
2014/68/EU CEN EN ISO 4126-2:2019 4126-2:2018) 30/09/2019 30/09/2019 - - - - -
5
EN 10028-1:2007+A1:2009,
EN 10028- Flat products made of steels for pressure purposes - OJ C 293 - OJ C 049 -
2014/68/EU CEN 1:2007+A1:2009/AC:2009 Part 1: General requirements 19/07/2016 12/08/2016 - - - 09/02/2018 09/02/2018
6
Flat products made of steels for pressure purposes - OJ C 389 -
2014/68/EU CEN EN 10028-7:2016 Part 7: Stainless steels 17/11/2017 17/11/2017 - - - - -
OJ C 293 -
2014/68/EU CEN EN 10204:2004 Metallic products - Types of inspection documents 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 10213:2007+A1:2016 Steel castings for pressure purposes 12/08/2016 12/08/2016 - - - - -
7
Welded steel tubes for pressure purposes -
Technical delivery conditions - Part 2: Electric
EN 10217-2:2002, welded non-alloy and alloy steel tubes with OJ C 293 - OJ L 121 -
2014/68/EU CEN EN 10217-2:2002/A1:2005 specified elevated temperature properties 19/07/2016 12/08/2016 - - - 20/04/2021 20/04/2020
8
Welded steel tubes for pressure purposes -
Technical delivery conditions - Part 6: Submerged
arc welded non-alloy steel tubes with specified low OJ L 121 -
2014/68/EU CEN EN 10217-6:2019 temperature properties 20/04/2020 20/04/2020 - - - - -
9
Butt-welding pipe fittings - Part 2: Non alloy and
ferritic alloy steels with specific inspection OJ C 293 -
2014/68/EU CEN EN 10253-2:2007 requirements 19/07/2016 12/08/2016 - - - - -
OJ C 293 - OJ C 389 -
2014/68/EU CEN EN 10272:2007 Stainless steel bars for pressure purposes 19/07/2016 12/08/2016 - - - 17/11/2017 17/11/2017
OJ C 389 -
2014/68/EU CEN EN 10272:2016 Stainless steel bars for pressure purposes 17/11/2017 17/11/2017 - - - - -
Hot rolled weldable steel bars for pressure purposes OJ C 293 - OJ C 389 -
2014/68/EU CEN EN 10273:2007 with specified elevated temperature properties 19/07/2016 12/08/2016 - - - 17/11/2017 17/11/2017
10
Refrigerating systems and heat pumps - Liquid
level indicating devices - Requirements, testing and OJ C 389 -
2014/68/EU CEN EN 12178:2016 marking 17/11/2017 17/11/2017 - - - - -
OJ C 293 -
2014/68/EU CEN EN 12288:2010 Industrial valves - Copper alloy gate valves 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 12420:2014 Copper and copper alloys - Forgings 19/07/2016 12/08/2016 - - - - -
EN 12434:2000, OJ C 293 -
2014/68/EU CEN EN 12434:2000/AC:2001 Cryogenic vessels - Cryogenic flexible hoses 19/07/2016 12/08/2016 - - - - -
11
EN 12516-3:2002, Valves - Shell design strength - Part 3: OJ C 293 -
2014/68/EU CEN EN 12516-3:2002/AC:2003 Experimental method 19/07/2016 12/08/2016 - - - - -
EN 12778:2002,
EN 12778:2002/AC:2003, OJ C 293 -
2014/68/EU CEN EN 12778:2002/A1:2005 Cookware - Pressure cookers for domestic use 19/07/2016 12/08/2016 - - - - -
12
Water-tube boilers and auxiliary installations - Part
6: Inspection during construction; documentation OJ C 293 -
2014/68/EU CEN EN 12952-6:2011 and marking of pressure parts of the boiler 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 12953-1:2012 Shell boilers - Part 1: General 19/07/2016 12/08/2016 - - - - -
13
Shell boilers - Part 4: Workmanship and OJ C 293 - OJ C 326 -
2014/68/EU CEN EN 12953-4:2002 construction of pressure parts of the boiler 19/07/2016 12/08/2016 - - - 14/09/2018 14/09/2018
OJ C 293 -
2014/68/EU CEN EN 12953-13:2012 Shell boilers - Part 13: Operating instructions 19/07/2016 12/08/2016 - - - - -
GRP tanks and vessels for use above ground - Part OJ C 293 -
2014/68/EU CEN EN 13121-2:2003 2: Composite materials - Chemical resistance 19/07/2016 12/08/2016 - - - - -
GRP tanks and vessels for use above ground - Part OJ C 293 -
2014/68/EU CEN EN 13121-3:2016 3: Design and workmanship 12/08/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 13134:2000 Brazing - Procedure approval 19/07/2016 12/08/2016 - - - - -
14
Refrigerating systems and heat pumps - Pressure
relief devices and their associated piping - Methods OJ L 250 -
2014/68/EU CEN EN 13136:2013+A1:2018 for calculation 30/09/2019 30/09/2019 - - - - -
EN 13445-1:2014, OJ C 293 -
2014/68/EU CEN EN 13445-1:2014/A1:2014 Unfired pressure vessels - Part 1: General 12/08/2016 12/08/2016 - - - - -
OJ C 293 - OJ C 389 -
2014/68/EU CEN EN 13445-2:2014 Unfired pressure vessels - Part 2: Materials 12/08/2016 12/08/2016 - - - 17/11/2017 17/11/2017
EN 13445-2:2014,
EN 13445-2:2014/A1:2016, OJ C 326 - OJ L 250 -
2014/68/EU CEN EN 13445-2:2014/A2:2018 Unfired pressure vessels - Part 2: Materials 14/09/2018 14/09/2018 - - - 30/09/2019 30/09/2019
EN 13445-2:2014,
EN 13445-2:2014/A1:2016,
EN 13445-2:2014/A2:2018, OJ L 250 -
2014/68/EU CEN EN 13445-2:2014/A3:2018 Unfired pressure vessels - Part 2: Materials 30/09/2019 30/09/2019 - - - - -
EN 13445-3:2014,
EN 13445-3:2014/A1:2015, OJ C 389 - OJ C 049 -
2014/68/EU CEN EN 13445-3:2014/A2:2016 Unfired pressure vessels - Part 3: Design 17/11/2017 17/11/2017 - - - 28/02/2018 09/02/2018
15
EN 13445-3:2014,
EN 13445-3:2014/A1:2015,
EN 13445-3:2014/A2:2016, OJ C 049 - OJ C 326 -
2014/68/EU CEN EN 13445-3:2014/A3:2017 Unfired pressure vessels - Part 3: Design 09/02/2018 09/02/2018 - - - 14/09/2018 14/09/2018
EN 13445-3:2014,
EN 13445-3:2014/A1:2015,
EN 13445-3:2014/A2:2016,
EN 13445-3:2014/A3:2017, OJ C 326 - OJ L 250 -
2014/68/EU CEN EN 13445-3:2014/A4:2018 Unfired pressure vessels - Part 3: Design 14/09/2018 14/09/2018 - - - 30/09/2019 30/09/2019
EN 13445-3:2014,
EN 13445-3:2014/A1:2015,
EN 13445-3:2014/A2:2016,
EN 13445-3:2014/A3:2017,
EN 13445-3:2014/A4:2018,
EN 13445-3:2014/A5:2018, OJ L 250 - OJ L 121 -
2014/68/EU CEN EN 13445-3:2014/A6:2019 Unfired pressure vessels - Part 3: Design 30/09/2019 30/09/2019 - - - 20/04/2020 20/04/2020
EN 13445-3:2014,
EN 13445-3:2014/A1:2015,
EN 13445-3:2014/A2:2016,
EN 13445-3:2014/A3:2017,
EN 13445-3:2014/A4:2018,
EN 13445-3:2014/A5:2018,
EN 13445-3:2014/A6:2019,
EN 13445-3:2014/A7:2019, OJ L 121 -
2014/68/EU CEN EN 13445-3:2014/A8:2019 Unfired pressure vessels - Part 3: Design 20/04/2020 20/04/2020 - - - - -
OJ C 293 -
2014/68/EU CEN EN 13445-4:2014 Unfired pressure vessels - Part 4: Fabrication 12/08/2016 12/08/2016 - - - - -
16
Unfired pressure vessels - Part 6: Requirements for
the design and fabrication of pressure vessels and
EN 13445-6:2014, pressure parts constructed from spheroidal graphite OJ L 250 -
2014/68/EU CEN EN 13445-6:2014/A2:2018 cast iron 30/09/2019 30/09/2019 - - - - -
OJ C 293 - OJ C 389 -
2014/68/EU CEN EN 13480-1:2012 Metallic industrial piping - Part 1: General 19/07/2016 12/08/2016 - - - 15/12/2017 17/11/2017
OJ C 389 - OJ L 121 -
2014/68/EU CEN EN 13480-1:2017 Metallic industrial piping - Part 1: General 17/11/2017 17/11/2017 - - - 20/04/2020 20/04/2020
EN 13480-1:2017, OJ L 121 -
2014/68/EU CEN EN 13480-1:2017/A1:2019 Metallic industrial piping - Part 1: General 20/04/2020 20/04/2020 - - - - -
OJ C 389 - OJ L 250 -
2014/68/EU CEN EN 13480-2:2017 Metallic industrial piping - Part 2: Materials 17/11/2017 17/11/2017 - - - 30/09/2019 30/09/2019
EN 13480-2:2017,
EN 13480-2:2017/A3:2018,
EN 13480-2:2017/A1:2018, OJ L 250 -
2014/68/EU CEN EN 13480-2:2017/A2:2018 Metallic industrial piping - Part 2: Materials 30/09/2019 30/09/2019 - - - - -
17
EN 13480-4:2012,
EN 13480-4:2012/A1:2013, Metallic industrial piping - Part 4: Fabrication and OJ C 293 -
2014/68/EU CEN EN 13480-4:2012/A2:2015 installation 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 13547:2013 Industrial valves - Copper alloy ball valves 19/07/2016 12/08/2016 - - - - -
18
Cryogenic vessels - Safety devices for protection
against excessive pressure - Part 2: Bursting disc OJ C 293 -
2014/68/EU CEN EN 13648-2:2002 safety devices for cryogenic service 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 13789:2010 Industrial valves - Cast iron globe valves 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 13835:2012 Founding - Austenitic cast irons 19/07/2016 12/08/2016 - - - - -
EN 14197-3:2004,
EN 14197-3:2004/AC:2004, Cryogenic vessels - Static non-vacuum insulated OJ C 293 -
2014/68/EU CEN EN 14197-3:2004/A1:2005 vessels - Part 3: Operational requirements 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 14222:2003 Stainless steel shell boilers 19/07/2016 12/08/2016 - - - - -
19
EN 14382:2005+A1:2009, Safety devices for gas pressure regulating stations
EN and installations - Gas safety shut-off devices for OJ C 293 -
2014/68/EU CEN 14382:2005+A1:2009/AC:2009 inlet pressures up to 100 bar 19/07/2016 12/08/2016 - - - - -
20
Specification and qualification of welding
procedures for metallic materials - Qualification
based on pre-production welding test (ISO OJ C 293 -
2014/68/EU CEN EN ISO 15613:2004 15613:2004) 19/07/2016 12/08/2016 - - - - -
21
Welding - Friction welding of metallic materials OJ C 293 -
2014/68/EU CEN EN ISO 15620:2000 (ISO 15620:2000) 19/07/2016 12/08/2016 - - - - -
OJ C 293 -
2014/68/EU CEN EN 16767:2016 Industrial valves - Steel and cast iron check valves 12/08/2016 12/08/2016 - - - - -
22
Industrial valves - Globe valves of thermoplastics OJ C 293 -
2014/68/EU CEN EN ISO 21787:2006 materials (ISO 21787:2006) 19/07/2016 12/08/2016 - - - - -
23
Column legend
(A) Reference number of a relevant Directive or Regulation under which it was published in the OJ
(B) European standardisation organisation that adopted the relevant standard
(C) Reference number of a relevant European standard or of a European standard and its amendment(s)
(D) Title of a European standard
(2) Reference number and date of a relevant publication in the L or C series of the OJ in cases where a reference was published in the OJ without restriction
(5) Reference number and date of a relevant publication in the L or C series of the OJ in cases where a reference was published in the OJ with restriction
24