Professional Documents
Culture Documents
Product Application Guide: Thread Sealing Threadlocking
Product Application Guide: Thread Sealing Threadlocking
Strength / Recommended Size of Temperature Thread Loctite® 55 Low • Safe, fast and easy to use on metal and plastics threaded fittings n/a 100mm (4”) 150°C
APPLICATION SOLUTION FEATURES SEALING CORD • Allows reliable re-adjustment of the joint with neat and clean application
Colour Primer Thread Resistance
Sealing White • Potable water AS/NZS 4020:2005 & AGA approved up to 85°C
Surface Loctite® 770 All Cyanoacrylates • Primes polyolefin and low surface energy substrates to allow bonding 8 Hours 30 Sec Heptane
Loctite 596
® • Seals all flanges including stamped sheet metal where high temperature resistance is required n/a Good 315°C PP PRIMER • Suitable for priming PTFE, elastomer, polyethylene, polypropylene, etc
• No shrinkage, no dry-out in service Colourless • Used to promote bonding with most Instant Adhesives
HIGH TEMPERATURE
SILICONE
Flexible
• Meets MIL-A-46106 TYPE 1 Preparation
Loctite® 7471 Anaerobics • General purpose primer designed to speed the cure of Loctite anaerobic adhesives, sealants 7 Days 30 - 70 Sec Acetone /
Clean and degrease PRIMER ‘T’ and retaining compounds Isopropanol
Loctite® 5900 • Seals all flanges including stamped sheet metal n/a Excellent 230°C
work surfaces. Ensure Amber • Used to accelerate cure speed, or for applications under cold weather conditions (bond
BLACK MAXX SILICONE • Excellent resistance to automotive engine oils strength may be reduced)
Flexible full cure on inactive
• Excellent adhesion to a wide variety of plastic substrates, glass, ceramics and metals
• CFIA approved, NSF P1 surfaces. Loctite® 7649 Anaerobics • Used where accelerated cure speed is required, or in cold weather, and where gaps exceed 30 Days 30 - 70 Sec Acetone
PRIMER ‘N’ normal recommendations
Green
Fixture Time / Operating
APPLICATION SOLUTION
Colour
FEATURES
Temperature
Viscosity Especially for Loctite 7070
® Cleans all surfaces • General purpose cleaner degreaser for precision parts, races, gears, bearings, controls, etc. Equivalent to the evaporation rate ODC Free
ODC FREE CLEANER & • Compatible with some plastics and non-corrosive of water. Wiping or blowing will
DEGREASER Colourless • Contains no ozone depleting chemicals accelerate dry time.
5 min • Displays high impact strength Up to 135°C Syrup Magnet
Structural Loctite® 324 • Ideal for larger gap applications Bonding
IMPACT RESISTANCE BONDER
Amber • Used with Loctite 7075 Loctite® 790 Removes • Removes baked-on chemical gaskets, gasket cements on metal surfaces Leave on surface for 5 to 10 min. Solvent
Bonding CHISEL GASKET REMOVER Anaerobics • Excellent for removing formed-in-place gaskets
• Spray application enables maximum penetration
Wipe / Scrape clean.
15 - 30 sec • Low to medium gap fill Up to 120°C High Metal, Wood,
Bonds a wide variety
Loctite® 330 • Use with Loctite® 7387 Ferrite White Foam
MULT BOND
of materials. Such as Cream • Excellent high temperature resistance
• Ideal for bonding close-fitting metals and magnets
metal, ceramic and APPLICATION SOLUTION Odour / Colour FEATURES Functions Appearance
plastic. 4 - 6 min • Resistant to a wide range of chemicals and solvents Up to 120°C Heavy Syrup General
Loctite 3801 /
®
• Excellent electrical insulation purpose Hand Loctite® Hand Wipes Mild Citrus • Enhanced cleaning formula with natural oils and emollients No rinse No residue Pre-moistened
• Powerful and effective in removing tar, grease, wax, ink, paint, lubricants and adhesives waterless
POX PAK Clear • Ideal for emergency repairs or where fast cure is required bonding of
5 MINUTE EPOXY metal, wood Cleaning White towels
Mild Citrus • Contains no harmful petroleum solvents, conditions skin with lanolin, aloe and jojoba Cleans with or without water Textured
Loctite® 3805 15 min • Can be drilled, tapped, threaded or filed and is an excellent electrical insulator Up to 150°C Heavy Paste Rebuilding of Loctite® Yuk Off • Pumice formula removes the toughest grease, dirt, oil and ink Cream
• Ideal for repairs, filling, bonding to iron steel brass, bronze, aluminum and copper surfaces
STEEL & ALUMINUM EPOXY
Grey • Typically used under speedy sleeves
Orange Off White • Biodegradable and non-toxic
FILLER HAND CLEANER
FOR FURTHER INFORMATION ON THESE AND TECHNICAL SUPPORT PHONE: AUSTRALIA 1300 88 555 6 WWW.LOCTITE.COM.AU NEW ZEALAND +64 (9) 272 6710 WWW.LOCTITE.CO.NZ IDH 1670840 ART1015 12/2012