Professional Documents
Culture Documents
Deutsche Akkreditierungsstelle GmbH
Annex to the Accreditation Certificate D‐PL‐18993‐01‐00
according to DIN EN ISO/IEC 17025:2005
Period of validity: 03.09.2013 to 02.09.2018 Date of issue: 03.09.2013
Holder of certificate:
Zentrallabor Siegerland Braun & Co.
Gewerbestraße 2, 57258 Freudenberg
Tests in the fields:
mechanic‐technological and metallographic tests, corrosion tests as well as spark emission
spectrometry of steel‐ and ferrous materials and non‐ferrous metal materials
Abbreviations used: see last page
The testing laboratory is permitted, without being required to inform and obtain prior approval
from DAkkS, to use standard testing methods listed here with different issue dates.
1 Mechanic‐technological tests
DIN EN ISO 148‐1 Metallic materials ‐ Charpy pendulum impact test ‐ Part 1: Test
2011‐01 method
DIN EN ISO 9016 Destructive tests on welds in metallic materials ‐ Impact tests ‐
2013‐02 Test specimen location, notch orientation and examination
DIN 50115 Notched bar impact testing of metallic materials using test pieces
1991‐04 other than ISO test pieces
ASTM E 23a Standard Test Methods for Notched Bar Impact Testing of
2012 Metallic Materials
DIN EN ISO 6892‐1 Metallic materials ‐ Tensile testing ‐ Part 1: Method of test at
2009‐12 room temperature
(here: Method B)
This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/6
Annex to the accreditation certificate D‐PL‐18993‐01‐00
2 Metallographical tests
6 Further applicable standards
ASTM A 370 Standard Test Methods and Definitions for Mechanical Testing of
2012 Steel Products
(Field of application: Tension Test, Bend Test, Hardness Test,
Charpy Impact Test)
(further applicable for: ASTM E 23; ASTM E 8; ASTM E 21;
ASTM A 92; ASTM E 10)
ASTM A 923 Standard Test Methods for Detecting Detrimental Intermetallic
2008 Phase in Duplex Austenitic/Ferritic Stainless Steels
(Field of application: Procedure B and C)
(further applicable for: ASTM G 48; ASTM E 23)
abbreviations used:
ASTM American Society for Testing and Materials
Z‐S PA In‐house method of the Zentrallabor Siegerland Braun & Co.