Professional Documents
Culture Documents
General Specifications:
A microprocessor-based water meter with graphical display and key for optimum customer operation and
information on site. The transmitter drives the magnetic field in the sensor, evaluates the flow signal from the sensor
and calculates the volume passing through. It delivers the required information via the integrated pulse output or
communication interfere as part of a system solution. Its intelligent functionality, information and diagnostic ensure
optimum meter performance and information to optimize water supply billing.
A battery powered water meter full bore magnetic flowmeter that complies with the WRAS and OIML R49
water meter standards, engineered for stand-alone water applications such as water abstraction, distribution network,
revenue metering and irrigation.
Technical Specifications:
Meter Technology – Electromagnetic Full bore with Bi-directional Measurement
Physical Specifications:
Pipe Diameter – 6”Ø
End Connection – Flanged
Process Operating Conditions:
Operating Pressure : 150 psi
Operating Temperature : 158 °F
Output Options:
Interfere Options - Serial/Digital
Communication:
Can be communicated via IrDA : Standard integrated infrared communication interfere with Mod-Bus RTU
Protocol
User Interface:
Front-Panel Computer Interfere – Controllable and configured via PC Computer
Features:
Programmable; Recorder/Totalizer
Programmable Functions, Recorder/Totalizer
Functions, Bi-directional Measurement
DIAGNOSTIC
Should have a configuration tools and software for field Diagnostic Test and Parameter Changes and for
uploading/downloading measure variables.
Flow Sensor
Indicating Transmitter
Enclosure Rating: IP68, should be stainless Steel Top Housing Material and not Epoxy Painted
Display: Forward Reverse Flow R and Net Total, Time, Date, Status Indication Alarm Fault
Unit : Volume Cubic Meter (m3)
Flow rate (m3/hour)
Output : 2 pulse (Programmable as pulse volume, Forward Reverse flow, Net, Total)
Totalizer Display : Should have 3 Totalizer display can be configured to Forward, Reverse and Bi-
directional Net Flow
Power Supply: Replaceable Internal Battery Packed with Six (6) Years minimum of Maintenance
free battery and it should be Site Replaceable Batteries.
Transmitter should have a Built-in Data logger and can be upgraded for Remote Monitoring by
adding an Upgrade GSM Module Unit Data Logger for REMOTE GSM/GPRS.
Performance
The Magnetic Flowmeter Sensor Should be Submersible and Buriable type considering the unit will
be installed in a remote site soil might burry the sensor during rainy season
Additional Scope
EDDIE P. GOKIANGKEE
Municipal Mayor