Professional Documents
Culture Documents
As shown in Figure below, the curves A and B represent load deflection curve from full scale static loading
tests of clayey and sandy soils respectively. Discuss the behaviour of these curves to determine the
Calculate the pile group bearing capacity if the piles are placed 3.5ft center to center and joined at the top
by a square pile cap supported by nine piles. The pipe pile's allowable load is 93.83 kips with a FOS of
An 18 in. diameter concrete pile is driven at a site as shown in Figure. Determine the design capacity of
GSL
Clay
22 ft g = 105 lb/ft3
qu = 2000 lb/ft2
Clay
10 ft
g = 126 lb/ft3
qu = 3500 lb/ft2
A drilled shaft is shown in Fig. The uncorrected average standard penetration number (N60) within a
distance of 2Db below the base of the shaft is about 30.
ii-) The load carrying capacity for a settlement of 0.5 in. Use Reese and O’Neill’s method
2 ft