Professional Documents
Culture Documents
Mrheo Pro g3
Mrheo Pro g3
Product : Description:
Magnetorheological
(MR) Damper mRHEO S-ACTIVE is an electronically
controllable smart damping device using
magnetorheological fluid technology,
Category:
Semi active (Controllable) engineered and designed to smooth out or
Damper damp shock impulse and dissipate kinetic
energy. It responds in real time to external
conditions using a special fluid which
Product Code :
TM provides wide range of damping resistance
mRHEO S-ACTIVE
(Masterstroke) PRO with its unique rheological properties.
(*Applicable for Advanced Vibration/Motion control applications)
Benefits Features
Mechanical Specifications
Shock Absorber Type Adjustable Compression and Tension Mode
Cautionary Note
-DAMPER STROKE TO BE LIMITED WITHIN THE SPECIFIED STROKE RANGE. STROKE: 70 mm (AT FULL EXTENSION).
-SURFACE OF ROD TO BE PROTECTED DURING HANDLING AND INSTALLATION.
-ALLOW A MIN. SAFETY CLEARANCE OF 3 mm.
-DAMPER DOES NOT SUPPORT COMPRESSION END STOP.
-THE RECOMMENDED ELECTRICAL REQUIREMENTS SHOULD BE FOLLOWED WHILE IN USE.
-THE CONNECTOR CABLES SHOULD BE CAREFULLY HANDLED AND PROTECTED.
User Instructions
-CONNECT ONE END OF THE CONNECTOR CABLE OF THE MRD UNIT TO THE POWER SOURCE ( CONTROLLER KIT )
-SET THE DESIRED CONTROL LEVELS ACCORDING TO THE DAMPING FORCE REQUIRED UNDER DIFFERENT CONDITIONS.
-THE RECOMMENDED POWER LEVELS SHOULD BE IN THE RANGE (0 – 2.5 A MAX) / 0-15 VDC .
-FOR CONTROL SOLUTIONS (WITH CONTROL ELECTRONICS,SENSORS AND SOFTWARE STRATEGIES),
* This Technical document created by AMT is an excerpt from the test report and the data provided herein are only representative of the test results reserved for its consumers.
AMT does not guarantee the performance of the product or the results obtained from the use of the product or this information where the product has been repackaged by any third party, including but not
limited to any product end-user. Any duplication or use of the data in the form of images/diagrams/report or any form of utilization in other electronic or printed publications without any prior consent from
AMT is prohibited and infringes the copyright laws. In such event, AMT is committed to take legal action against individual /Group/COMPANIES.