Professional Documents
Culture Documents
Mechanical Data
Case: JEDEC DO-41, molded plastic over glass body
Terminals: Plated axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denotes cathode end
We declare that the material of product
Mounting Position: Any
Weight: 0.012 oz., 0.3 g compliance with RoHS requirements.
Handling precautin:None
Maximum Ratings & Thermal Characteristics Ratings at 25°C ambient temperature unless otherwise specified.
EGP EGP EGP EGP EGP EGP EGP
Parameter Symbol symbol Unit
10A 10B 10D 10G 10J 10K 10M
Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V
Maximum average forward rectified current
IF(AV) 1.0 A
0.375" (9.5mm) lead length at TA = 55°C
Peak forward surge current 8.3ms single half
sine-wave superimposed on rated load (JEDEC IFSM 30 A
Method)
Maximum full load reverse current, full cycle
average,0.375"(9.5mm) lead lengths at TA = 55° IR(AV) 100 µA
C
Typical thermal resistance (Note 2) RθJA 55 °C/W
Operating junction and storage temperature range TJ, TSTG –50 to +150 °C
1/3
LESHAN RADIO COMPANY, LTD.
30
0.5 20
10
0.375" (9.5mm) Lead Length
0 0
0 25 50 75 100 125 150 175 1 10 100
Ambient Temperature, °C Number of Cycles at 60Hz
Fig 3. – Typical Instantaneous Forward
Fig 4. – Typical Reverse Characteristics
Characteristics
100 10
Instantaneous Forward Current (A)
Tj=125℃
TJ = 25°C
Pulse width = 300µs
1% Duty Cycle
10 1.0
Tj=75℃
1.0 0.1
Tj=25℃
0.1 0.01
0.01 0.001
0.8 1.0 1.2 1.4 1.6 1.8 0 20 40 60 80 100
Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%)
Fig 5. –typical transient thermal
Fig 6. – Typical Junction Capacitance
impedance
100 20
Transient thermal impedance(°C/W)
TJ = 25°C
f = 1.0 MHz
Vsig = 50mVp-p
10
10
1.0
0.1 1.0
0.01 0.1 1.0 10 100 0.1 1 10 100
t,Pulse duration,sec Reverse Voltage (V)
2/3
LESHAN RADIO COMPANY, LTD.
Package outline
Φd L
ΦD
Dimensions Note:
inches mm DO-41
Min. Max. Min. Max. molded plastic case
L 0.166 0.205 4.2 5.2 The marking band indicates the
L1 1.0 - 25.4 - cathode
ΦD 0.080 0.107 2.0 2.7
Φd 0.028 0.034 0.7 0.9
3/3