Professional Documents
Culture Documents
Produced in Germany,
the center for solar technology
Sunmodule Plus:
Positive performance tolerance
The TUV Rheinland Power controlled inspection mark guarantees that the nominal
power indicated for a Sunmodule Plus is inspected at regular intervals and thus
ensured. The deviation to TUV is maximum 2 percent.
The positive power tolerance guarantees utmost system efficiency. Only modules
achieving or exceeding the designated nominal power in performance tests are
dispatched. The power tolerance ranges between -0 Wp and +4 Wp.
The Sunmodule Plus SW 196 Vario poly is electrically compatible with Sunmodule Plus
SW 245 poly. As a result, these modules are easy to combine on small roofs and provide
maximum flexibility in using roof space.
www.solarworld.com
SW 196 Vario poly
SW 196
Maximum power Pmax 196 Wp
Open circuit voltage Uoc 30.0 V
Maximum power point voltage Umpp 24.7 V
Short circuit current Isc 8.49 A
Maximum power point current Impp 7.96 A
Measuring tolerance (Pmax) traceable to TUV Rheinland: +/- 2% (TUV Power controlled) *STC: 1000W/m², 25°C, AM 1.5
SW 196
Maximum power Pmax 142.4 Wp
Open circuit voltage Uoc 27.2 V
Maximum power point voltage Umpp 22.4 V
Short circuit current Isc 6.91 A
Maximum power point current Impp 6.37 A
Minor reduction in efficiency under partial load conditions at 25°C: at 200 W/m², 95% (+/-2%) of the STC efficiency (1000 W/m²) is achieved.
1357
THERMAL CHARACTERISTICS ADDITIONAL DATA
NOCT 46 °C Power sorting -0 Wp / +4 Wp
TC Isc 0.081 %/K J-Box IP65
TC Uoc -0.37 %/K Connector MC4 / KSK4
TC Pmpp -0.45 %/K
1000 W/m²
I SC
• Ammonia resistance
tested
01.03.2013 EN
800 W/m²
Module current [A]
600 W/m²
400 W/m²
200 W/m²
100 W/m²