Professional Documents
Culture Documents
2 CM-004N
DIGITAL INDICATOR
DESCRIPTION
• The CM-004N is a digital display that accepts 0-10 VDC, 0-20 mA
and 4-20 mA inputs
• Display with 7-Segment red 4 digits, 0.56 inches
• Outputs from -1999 to 9999 can be set up to 3 decimal places
• High Limit and Low Limit Range can be set by setting the
Keypad Switch
• Small, compact. Suitable for mounting the cabinet. With
TECHNICAL SPECIFICATION limited space
• Suitable for installation in control cabinet. To show the speed of
220 VAC ±10% 50-60 Hz the motor from the inverter or DC Drive is
Power Supply 110 VAC ±10% 50-60 Hz • Alarm Function is set by Keypad Switch. There are many options
including High Alarm, Low Alarm and High-Low Alarm
24 VAC/VDC • 12VDC power supply for Transducer
Power Consumption 3 VA
APPLICATION
7-Segment, Size 0.56 Inch, 4 Digit • Installed in cabinets.
Display
1 LED (Show Alarm Relay) • Display of all the processes from the standard analog signal
Range 0-10 VDC • Food industry
• Chemical industry
Voltage Accuracy ± 0.5% of Full Scale
Impedance 10 kΩ Table 1. Select input sensors and setting range.
0-20 mA Setting Range/Display Range
Range Symbol Input Type
Input 4-20 mA Non-decimal point Decimal point
Current
Accuracy ± 0.5% of Full Scale 00 0-20mA -199.9~999.9
Impedance 120 Ω
01 4-20mA -1999 ~ 9999 -19.99 ~ 99.99
Response Time 62.5 mSec
02 0-10VDC -1.999~9.999
DC 12 VDC , 50 mA
Source for Sensor
Output 1 Alarm 5A/250VAC DIMENSION
CM-004N 3
DIGITAL INDICATOR
CUTTING PANEL
Model a b c d
CM-004N 92 45 60 120
4 CM-004N
DIGITAL INDICATOR
WIRING DIAGRAM
ORDERING CODE
CM-004N-