Professional Documents
Culture Documents
PSP
-
202 0004
13: 1 / 0 3 0 3
2 5 /2 9
Illustration 1
(1) Rod end
(2) Nut
KE :34- 8 1 g00575907
N
(3) Rod
0 5
Note: The position sensor for the truck body must be correctly adjusted for the proper operation of the gear limit when the truck body is raised.
©2 R 838 :00
Also, the position sensor for the truck body is used to control the SNUB position of the hoist control valve.
0
The distance between the centers of the rod ends must be 423 ± 3 mm (16.7 ± 0.1 inch).
llar
2. Loosen nut (2) on rod (3).
fide r:
3. Adjust rod end (1) in order to get a distance of 423 ± 3 mm (16.7 ± 0.1 inch) between the centers of the rod ends.
PSP-00043039
2021/05/21
n
13:24:36-05:00
i01096472
© 2021 Caterpillar Inc.
Caterpillar:
Confidential Green