Professional Documents
Culture Documents
N Style Coaxial Connector
N Style Coaxial Connector
FEATURE
Characteristic
Impedance ・ N series is a thread coupling coaxial connector
which is the most popular as a 7mm type 50 Ω
50 Ω
impedance.
Frequency ・ N series is available for various cable type.
Range
・ It is incompatible to NC series(75 Ω impedance N
DC to 3GHz
Style connector).
Lock Type
SPECIFICATIONS
Characteristic Impedance 50 Ω
Rated Volatge 500VAC(r.m.s.)
Dielectric Withstanding Voltage 1,500V AC(r.m.s) / 1 minute
Insulation Resistance 1,000M Ω min. at 500V DC
Contact Resistance 3m Ω max.
V.S.W.R. 1.3 max. (DC 〜 3GHz)
Operating Temperature -55 〜 +85℃
* The specifications are typical but may not apply to all connectors.
Please check the specifications on each item with its drawing from us when you use.
Also, the performance is diffrenet by using cable.
RoHS
MATERIAL/FINISH Compliant
Compliant
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
190326
http://www.ddknet.co.jp
N Series Unit:mm
φ21
φA
3D-2V
3C-2V
N-P-3-NiCAu-CF 6.2 44.6 Ni Au 1
3D-2V
(L)
3C-2W
N-P-3W-CF 7.2 44.6 Ag Ag 1
3D-2W
N-P-5 3C-2W
N-P-3W-Ni-CF 7.2 44.6 Ni Ag 1
3D-2W
40%
φ21
3C-2W
φA
(L)
(38.0)
N-P-5
N-P-10 Finish
Applicable Assmbly
Part Number φA (L) Outer Center Instruction
Cable
φ21
φA
Conductor Conductor
3.5D-FE
N-SP-3.5DFE-CF 6.2 41.5 Ni Au ー
φ21
φA
3.5D-QEFA
(L)
5C-2V
N-P-8-1 N-P-5-CF 8.6 44.0 Ag Ag 1
5D-2V
5C-2V
(51.7) N-P-5-Ni-CF 8.6 44.0 Ni Ag 1
5D-2V
φ21
φA
5C-2W
N-P-5W-CF 9.1 45.0 Ag Ag 1
5D-2W
(38.0) 5C-2W
φ21
φA
5C-2W
N-P-5W-NiCAu-CF 9.1 45.0 Ni Au 1
(L) 5D-2W
N-P-5DFB-1-CF 5D-FB 8.1 44.0 Ni Ag 1
φ21
φA
(51.7)
φ21
φA
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
(L)
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
形状はN-P-5D2V-CR20の場合 2
N-P-3
~ 80%
(L)
φ21
φA
N-P-5 N Series Unit:mm
○ Straight Plug
(L)
φ21
φA
N-P-5Clamp Type
(L)
φ21
φA
N-P-8-1
Finish
Applicable Assembly
Part Number φA Outer Center Instruction
φ21
(L) Cable
φA
Conductor Conductor
N-P-8-1 N-P-8DFB-1-CF 8D-FB 11.8 Ni Ag 4
(38.0)
N-P-10
φ21
φA
(38.0)
φ21
φA
N-P-10
Finish
Applicable Assembly
Part Number φA Outer Center Instruction
Cable
Conductor Conductor
(51.7)
φ21
φA
(51.7)
(L)
φ21
φA
形状はN-P-5D2V-CR20の場合
(L)
形状はN-P-5D2V-CR20の場合
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
3
N Series Unit:mm
○ Straight ジャック
Cable Jack
N-J-3
Clamp Type
Finish
Applicable Assembly
ジャック Part Number φA Outer Center
Cable Instruction
Conductor Conductor
(L2)
φA
3C-2V
N-J-3 N-J-3-CF 6.2 Ag Ag 2
(46) 3D-2V
3C-2V
N-J-3-Ni-CF 6.2 Ni Ag 2
N-J-5 3D-2V
ジャック
N-J-3
φA
(L2)
φA
ジャック
(L)
(46)
N-J-3
N-J-5
N-J-8
Finish
(L2)
φA
Applicable Assembly
Part Number φA (L) Outer Center
φA φB φA
Cable Instruction
(46) Conductor Conductor
φA
N-J-10
N-J-5 RG-8/U
N-J-8U-Ni-CF 11.2 47.0 Ni Ag 2
RG-9/U
(L)
φB
φA
φA
(34.9)
φB
φA
(L)
N-J-8
(L)
Finish
Applicable Assembly
(52.7) Part Number φA φB (L) Outer Center
N-J-10 Cable Instruction
(L2)
Conductor Conductor
φA
φB
N-J-8
N-J-8-1-CF 8D-2V 12.7 19.1 41.2 Ag Ag 5
φB
φA
φB
φA
N-J-10
(L)
(52.7)
N-J-10
(34.9)
φB
φA
Finish
Applicable Assembly
(52.7) Part Number φA φB Outer Center
(34.9)
Cable Instruction
Conductor Conductor
φB
φA
(52.7)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
4
N Series Unit:mm
+0.1
4-φ3.2 0
2.0 B 4-φ3.2 Finish
Applicable Assembly
Part Number φA B C Outer Center Instruction
Cable
Conductor Conductor
18.2±0.05
φ17.5
φA
3C-2V
C
+0.1
N-PJ-3-CF
φ17.8 0 6.2 16.7 18.2 Ag Ag 3
3D-2V
C 3C-2V
(46) □25.4 N-PJ-3-Ni-CF 6.2 16.7 18.2 Ni Ag 3
3D-2V
18.2±0.05
N-PJ-58U-CF RG-58/U 5.4 16.6 18.2 Ag Ag 3
φA
+0.1
4-φ3.2 0 N-PJ-58U-Ni-CF RG-58/U 5.4 16.6 18.2 Ni Ag 3
B 4-φ3.2
N-PJ-5取付け +0.1
4-φ3.2 0
N-PJ-3取付参考寸法
18.2±0.05
2.0 C 4-φ3.2
C
+0.1
φ17.8 0
18.24±0.05
+0.1
C +0.1 4-φ3.2 0
φA
φB
4-φ3.2 φ18.0 0
□25.4 2.0 B
18.2±0.05
D
Panel (47)
Mounting Dimensions 18.2±0.05
φ17.5
□25.4 18.24±0.05
φA
+0.1
φ17.8 0
+0.1
4-φ3.2 0 C
N-R取付け
C 4-φ3.2 (46) □25.4
18.2±0.05
+0.1
φA
18.24±0.05
4-φ3.2 0
4-φA
+0.1 +0.1
D
φ18.0 0 4-φ3.2 0
B N-PJ-5取付け
4-φ3.2 +0.1
4-φ3.2 0
18.24±0.05 18.2±0.05
C φ14.6
D Finish
18.2
18.24±0.05 φ15.0 0
Part Number φA B C D Outer Center Instruction
Cable
+0.1 Conductor Conductor
φ17.8 02
18.2 +0.1 5C-2V
φA
18.7
φB
C N-PJ-5-CF
φ18.0 0 8.6 17.5 16.7 18.24 Ag Ag 3
L □25.4 18.25D-2V
±0.05
□25.4
18.2±0.05
+0.1 N-PJ-5-Ni-CF 5D-2V 8.6 17.5 16.7 18.24 Ni Ag 3
0 D
4-φA (47) 4-φ3.2 □25.4 18.24±0.05
18.2±0.05
+0.1
N-R取付け 4-φ3.2 0
18.2
+0.1
φ15.0 0
C 4-φ3.2
+0.1
4-φ3.2 0
4-φA
18.24±0.05
18.2
□25.4 +0.1 18.2±0.05
D
φ18.0 0
18.2±0.05
φ14.6
18.2
+0.1
D φ15.0 0
□25.4 18.24±0.05
2
Panel Mounting
18.7 Dimensions
18.2
L □25.4 18.2±0.05
+0.1
4-φ3.2 0
4-φA◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
18.2±0.05
http://www.ddknet.co.jp
18.2
+0.1
φ15.0 0 5
18.2
+0.1
18.24±0.
φ17.8 0
D18.
+0.1
φA
φB
φ18.0 0
C
(46) □25.4
18.2±0.05
D
(47) □25.4
N Series 18.24±0.05 Unit:mm
○ Receptacle Jack
+0.1
N-R取付け 4-φ3.2 0
18.24±0.05
Part Number L Outer Center φA
+0.1
Conductor Conductor
D
φ18.0 0
18.2±0.05
φ14.6
N-R-CF 29 Ag Ag φ 3.2
18.2
+0.1
D φ15.0 0
N-R-Ni-CF 29 Ni Ag φ 3.2
(47) □25.4 18.24±0.05 N-R-NiCAu-CF 29 Ni Au φ 3.2
2
18.2
18.7
L □25.4 18.2±0.05
+0.1
4-φ3.2 0
4-φA 18.2±0.05
18.2
+0.1
φ15.0 0
2
18.2
18.7
L □25.4 18.2±0.05
○ Dust Cap
5/8-24UNEF-2B
(φ3.5)
Part Number Finish
(φ19.5)
N-RC-5 Ni
N-RC-5-D1 Ag
(60)
(71)
5/8-24UNEF-2B
11.1
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
6
N Series Unit:mm
Parts Configulration
Contact
Washer Insulator
Nut Washer Gasket Clamp Contact
Body
Washer Insulator
Nut Washer Gasket Clamp
Body
L1 Outer
Sheath Conductor
② Insert the nut, washer and gasket into the cable.
② Sheath
Outer
Conductor
Cut the sheath 15mm from the end of the cable
and insert the clamp.
15mm
Please be careful to not damage the outer
Nut Washer Gasket Clamp conductor.
15mm
Washer Gasket Clamp
Nut
Pick the outer conductor and turn
down to the clamp equally. Insulator
③ Pick the outer conductor and turn down to the
Canter Conductor clamp. Cut the outer conductor along the clamp.
③ Pick the outer conductor and turn
down to the clamp equally.
(Pre-soldering)
Insulator Cut the insulator and center conductor as fig.3.
Canter Conductor
Please be careful to not damage the center
(Pre-soldering) conductor.
3.5~4.0mm 5.0mm
3.5mm
7
N Series Unit:mm
L1
Nut Gasket Outer
Conductor
② Insert the nut, washer and gasket into the cable.
Nut Gasket Outer
② Conductor
Cut the sheath 15mm from the end of the cable
and insert the calmp.
Please be careful to not damage the outer conductor .
Cable 15mm
Washer
Cable 15mm
Washer
Center Conductor
Insulator
(Pre-soldering)
③ Pick the outer conductor and turn down to the
clamp. Cut the outer conductor along the clamp.
③ Center Conductor
Insulator Cut the insulator and center conductor as fig.3.
(Pre-soldering)
Please be careful to not damage the center
Clamp conductor.
3.5~4mm
3.5mm
Clamp 5mm
3.5~4mm
Washer
No gap
⑤ Insert the ring and insulator as fig. 5.
⑤ ● In case of the insulator which has directivity,
Washer
insert the insulator as below direction and fit
the thinner side of the insulator into the inside
diameter of the washer.
Insulator
Insulator Washer
Insulator
⑥
⑥ Insert the above assembly into the body and screw
Washer
Insulator
up by wrench.
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
8
N Series Unit:mm
Parts Configulration
Washer Clamp Washer Body
Washer
⑤ Insert the ring and insulator as fig. 5.
⑤ ● In case of the insulator which has directivity,
Insulator insert the insulator as below direction and fit
the thinner side of the insulator into the inside
Washer
diameter ofInsulator
the washer.
Insulator
Washer
Insulator
⑥ ⑥ Insert the above assembly into the body and screw
up by wrench.
Recommended Tightening Torque
:196 〜 392N・cm(20 〜 40kgf・cm)
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
9
N Series Unit:mm
Parts Configulration
Nut ※Washer Gasket Clamp Body
Nut ※Washer Gasket Clamp Contact Body
Contact
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
10
N Series Unit:mm
Parts Configulration
L1 N-J-8-1-CF
L1ー13.2
Washer N-J-8-1-Ni-CF
Sheath Outer conductor
UG-23D/U-CF L1ー13.8
N-J-10-CF
Washer
Sheath Outer conductor N-J-10-Ni-CF L1ー23.4
②
N-J-10DFB-1-CF
10mm
Nut Gasket ② Insert the nut, washer and gasket into the cable.
Clamp
Cut the sheath 10mm from the end of the cable
10mm and insert the clamp.
Nut Gasket Clamp Please be careful to not damage the outer
Pick the outer conductor and
turn down to the clamp equally/ Insulator conductor.
Outer Conductor
Pick the outer conductor and ③ Pick
(Pre-soldering) the outer conductor and turn down to the
③ turn down to the clamp equally/ Insulator
clamp. Cut the outer conductor along the clamp.
Outer Conductor Cut the insulator and center conductor as fig.3.
(Pre-soldering) 5mm
Please be careful to not damage the center
B A
conductor.
5mm
Part Number A(mm) B(mm)
B A
Soldering N-J-8-1-CF
N-J-8-1-Ni-CF 1.0 3.5 〜 4.0
UG-23D/U-CF
④ Soldering
Contact
N-J-10-CF
No gap N-J-10-Ni-CF 1.8 4.0 〜 4.5
N-J-10DFB-1-CF
Contact
No gap
④ Solder up the contact with the center conductor.
Please be careful to not deform the insulator
by heat.
When the solder is stick out, please shave
the extra solder.
No gap between contact and insulator of
⑤
the cable.
◎ Please acknowledge that the specification etc. of this catalog might change by the improvement etc. without notice.
Moreover, the characteristic and the specification of the published product are the reference values.
Please confirm the content with the latest delivery specifications when you use the product.
http://www.ddknet.co.jp
11